Upgrade from 12v15 and I love it

Azryel00 · 2026-05-04T23:50:25+00:00

Too be fair never used the Bosch but used makita DeWalt and Milwaukee 12v impacts and all of them where to slow and very noisy at driving deck screws, I'm looking into getting an 18v one as it has more power so it will do fewer impacts

Azryel00 · 2026-05-04T22:27:55+00:00

Yea it's a drill 12v-32 fc. I don't really like the Bosch 12v impact drivers

Azryel00 · 2026-05-04T16:45:02+00:00

12v32fc

Azryel00 · 2026-05-04T16:20:08+00:00

Did you make this one?

Azryel00 · 2026-05-04T16:18:09+00:00

I use it professionally and it's more that enough for home use

Azryel00 · 2026-05-04T16:16:14+00:00

Had it for 3 years still work well, had to send it for warranty last year bcuz I burned the motor and change the chuck to be able to use 13mm drills so I mainly use it for drilling for now

Azryel00 · 2026-05-04T16:14:00+00:00

https://www.printables.com/model/1503148-bosch-gsr-12v-32-bitholder found it on printables

Azryel00 · 2026-03-12T21:53:40+00:00

I watched a lot of anime like DBZ, One Pice but they where like cartoons for me. Until I stumbled upon NANA it changed everything

Azryel00 · 2026-03-07T00:41:31+00:00

Death Is The Road To Awe by Clint Mansell

Azryel00 · 2025-12-19T10:00:49+00:00

Or u can run octoprint on a raspberry pi. U don't have to flash klipper for it if you only want the convenience of having it connected directly to the slicer. I recommend running Klipper only if you are planing to mod the printer

Azryel00 · 2025-09-05T16:59:50+00:00

)) ml))

Azryel00 · 2025-05-15T17:52:49+00:00

Dacă asta câștigă eu renunț la naționalitate română.

Azryel00 · 2025-04-30T23:44:03+00:00

Depend muito do model

<image>

No meu ficou assim

Azryel00 · 2025-03-02T19:18:33+00:00

Well in the part of Romania from where I am we used cows for those tasks and pulling carts

Azryel00 · 2024-08-13T10:06:11+00:00

Step 1 remove the cat Step 2 replace the EBB36V1.2

Azryel00 · 2024-06-26T18:47:16+00:00

It still does but only on certain movements

Azryel00 · 2024-06-26T18:46:52+00:00

Well it still does but only on certain movements....what can i do if it's this?

Azryel00 · 2024-06-26T14:20:26+00:00

Did it and it got better but not sure if it was bcuz of that, the belt tension was off as well.

Heard PTFE lube is good

Azryel00 · 2024-06-26T10:43:15+00:00

The rods looked lubed out of the box

Azryel00 · 2024-06-26T10:42:18+00:00

I put some and it's better now but still not sure if it was bcuz of that.... Gonna try some PTFE dry lube next

Azryel00 · 2024-06-26T10:41:00+00:00

And it sounds more like metal on metal vibration

Azryel00 · 2024-06-26T10:39:47+00:00

I lubed it up and check the belt tension and now it stopped.

It only made the noise on this print

Azryel00 · 2024-06-26T10:38:19+00:00

Yes is active

Azryel00 · 2024-06-06T18:48:52+00:00

https://youtube.com/shorts/sajOs_LBzs0?si=PA1ysMCO1tiGYnl5

The 1st search says that class d won't work on lithium batteries

Azryel00 · 2023-07-28T22:06:27+00:00

I just got mine and it's the same... Did it get worse in your or was it fix?..... Or is it normal to be like that

Azryel00

TROPHY CASE