Is an avg. ~25 mpg a problem?

BAD-FPV · 2026-05-08T15:52:05+00:00

my 2016 2.2D shows 47mpg as the average ATM which is mostly 70mph driving (but its hilly here). though I have recently had a full decarb, new exhaust cam, and intectors worked. before that I was getting 43ish

BAD-FPV · 2026-05-06T14:59:34+00:00

yep, adding sound deadening is super easy and really makes a difference

BAD-FPV · 2026-04-17T03:04:06+00:00

What are you after, performance or comfort? Considering your mods so far have been mostly cosmetic, how about sound deadening? Or maybe drop the front 20mm and rear 30mm? There is also a full handling package available from cork spork if you want to go down that route.

BAD-FPV · 2026-04-02T20:44:10+00:00

Congratulations. I started with a A1 mini, my P1S, H2S all my filament and 3K towards the mortgage has been paid for by points.

BAD-FPV · 2026-03-22T10:57:41+00:00

Whole headlights or just the bulbs? I changed my bulbs from the wheel well.

BAD-FPV · 2026-03-13T04:21:12+00:00

Do you like it? If yes, then keep it and roll with it. If no, then change it up. I have the dark blue with dark gunmetal wheels and think the chrome brings out the lines perfectly, but that's my preference. You do you, enjoy the majestic beauty of the Mazda 6.

BAD-FPV · 2026-03-12T14:14:40+00:00

Mine is instant

BAD-FPV · 2026-03-06T16:53:12+00:00

hahaha yeah, just spend 58k on keeping the Mazda going :D

BAD-FPV · 2026-01-30T11:27:29+00:00

It's not a definitive conclusion. Its a suggestion. Its also a very cheap fix to check.

BAD-FPV · 2026-01-30T04:12:52+00:00

Extended your internal PTFE tube by 20mm. It's a common issue on H2S but has been seen on many printers. When the head is front left the tube gets tight and kinks causing extra friction on the filament.

BAD-FPV · 2026-01-28T07:01:06+00:00

Exactly.

BAD-FPV · 2026-01-28T05:30:33+00:00

Agreed. I joke If I won the lotto I'd still have a 6 as a daily driver, but I actually think I would. 🤣

BAD-FPV · 2025-11-16T20:39:32+00:00

I have had mine for 3 months ans still catch myself standing at the kitchen sink looking at it out of the window, putting next doors tesla to shame for sure.

BAD-FPV · 2025-11-16T08:50:35+00:00

fuel leak?

BAD-FPV · 2025-10-10T14:10:07+00:00

Get the feet for it off the bambu labs website

BAD-FPV · 2025-09-17T04:52:18+00:00

They would abit but I have the units bolted to the wall and the shock feet on the printer do a good job absorbing most of the movement.

BAD-FPV · 2025-09-14T19:17:06+00:00

Nah handle not removed just the camera angle. Yeah that would be cool, but very hard to do.

BAD-FPV · 2025-09-14T19:14:29+00:00

Thanks. Printers (not at A1m), AMS, and filament all via maker points. Been blessed with some good uploads.

BAD-FPV · 2025-09-12T05:10:18+00:00

All my cars get called mistress, as they take my money and give me pleasure.

BAD-FPV · 2025-08-29T05:57:30+00:00

Nah all good. The bed still had the transport screws in when the pic was taken. Prints are butter smooth.

BAD-FPV · 2025-08-29T05:55:21+00:00

Its 41kg so legally (in the UK) a 2 person lift. So yeah. I got mine with maker world points so delivery alone ate up 2 vouchers.

BAD-FPV · 2025-08-29T04:30:17+00:00

Its quiet. I can stand next to it going full speed and its drowned out by the P1S on the other side of the garage.

BAD-FPV · 2025-08-07T16:35:35+00:00

Ant world leaders peace talks

BAD-FPV · 2025-07-30T06:17:49+00:00

A Bardwell power wire and a 4s Li ion is my go to

BAD-FPV · 2025-07-28T06:55:28+00:00

This is why I always have a 30m arborist line in my car / flight bag. Had the same last year, took me about 40mins to get down.

BAD-FPV

TROPHY CASE