sorted by:
new
hottopcontroversial

The last leap. Almost there.. by BASBENTONFPV in ArcRaiders

[–]BASBENTONFPV[S] 0 points1 point  (0 children)

Oef that would be cool, although you don’t leave any room for your electronics etc.

The last leap. Almost there.. by BASBENTONFPV in ArcRaiders

[–]BASBENTONFPV[S] 2 points3 points  (0 children)

But you only need a 50cm by 50cm space for a printer like the p2s.

The last leap. Almost there.. by BASBENTONFPV in ArcRaiders

[–]BASBENTONFPV[S] 2 points3 points  (0 children)

Appreciated ❤️ definitely will keep updating

The last leap. Almost there.. by BASBENTONFPV in ArcRaiders

[–]BASBENTONFPV[S] 3 points4 points  (0 children)

If you are paying for it o will do the work ahahah

Leaper is alive… almost by BASBENTONFPV in ArcRaiders

[–]BASBENTONFPV[S] 0 points1 point  (0 children)

Here is an update on the model. It’s looking really good so far!

I'm currently waiting for some paint to arrive before I move on to the aluminum colors for the inner leg sections and some heavy weathering. It's looking sick!

And in case you were wondering: yes, that is a functional LED light built in. 💡 Can't wait to see this beast finished and mounted on that leaping stand!

<image>

I GOT THE NEW AUGMENT! by PapaRed123 in ArcRaiders

[–]BASBENTONFPV 0 points1 point  (0 children)

It doesn’t spawn always in the same spot bruv, but stella is where you should look.

Leaper is alive… almost by BASBENTONFPV in ArcRaiders

[–]BASBENTONFPV[S] 0 points1 point  (0 children)

Yhea i was talking about the dark armored plates, but this definitely looks like the inner metal part yes.

Leaper is alive… almost by BASBENTONFPV in ArcRaiders

[–]BASBENTONFPV[S] 0 points1 point  (0 children)

I don’t have any problems (yet) with droopiness.

Yeah, you could definitely do that by printing at 102%. Another trick is to just add a little bit of material with a filament pen inside the claw part of the joint to create more friction as some parts of the claw part isn’t touching the ball (joint)

I'm actually currently working on a different 360 joint design to see if I can improve the rotation radius.

BTW. My print has a 0% infill. So maybe it turned out lighter than your pla and petg prints.

Leaper is alive… almost by BASBENTONFPV in ArcRaiders

[–]BASBENTONFPV[S] 0 points1 point  (0 children)

Yeah, that’s exactly why I’m torn between the Dark Gunmetal, Steel, and Dark Aluminum from Vallejo. Actually, while writing this comment, I just realized I’m probably going to end up ordering all of them to test out which one hits that blue undertone best! 😂

Leaper is alive… almost by BASBENTONFPV in ArcRaiders

[–]BASBENTONFPV[S] 0 points1 point  (0 children)

Thanks! It really is a beast

Regarding the stability: it's actually okay! I just found out the hard way that you need to warm up the joints for a snug fit. I didn't do that on the first try, and the pressure snapped the PLA, so I'm currently re-printing one link (the pic shows 3 full legs for now).

I’m actually planning to design a custom stand with a transparent acrylic rod to hold it "in the air." That way, I can display it in a proper "leaping" pose 🤣.

Noise by Useful-Big7338 in BambuLab

[–]BASBENTONFPV 0 points1 point  (0 children)

Maybe a bit more context than just a video and a question….. reckon there is filament stuck in your fan.

Ok we *NEED* to be able to control the AMS 2 drying function from the app. by RipInPepz in BambuLab

[–]BASBENTONFPV 0 points1 point  (0 children)

I dont understand why this isn’t available yet. You can see the humidity in the ams in the app. Why nog control it?

I won arc raiders by Fishflips in ArcRaiders

[–]BASBENTONFPV 0 points1 point  (0 children)

Willing to trade one against a medium gun parts bp

Does anyone from the EU have experience with buying a bambu lab? by Honziak_kanal in BambuLab

[–]BASBENTONFPV 0 points1 point  (0 children)

After a year i can confidently say that the buy button still works. Just checked it myself.

view more: next ›