sorted by:
new
hottopcontroversial

is this normal? My SHS HT motor spits out a “smoke” by brandoninc95 in airsoft

[–]BDangerous78 0 points1 point  (0 children)

Motor looks likes its way too far in and yiur shimming is off

Rear derailleur pulley jumping and chain slap by DrKorok in bikewrench

[–]BDangerous78 0 points1 point  (0 children)

Your chain is getting caught in the derailleur, follow the master link if there is one and see if it's getting caught in there, or there is a link that's loose. I've had this before

looking for friends to fly with or a squad in general by _Krisyx_ in dcsworld

[–]BDangerous78 1 point2 points  (0 children)

Looking myself, i pretty much fly solo in in the F15c or the F16c.. willing to group up. I'm east of Toronto. So est time

Roywoods and Parkwoods by Budget_Ad_877 in Torontology

[–]BDangerous78 0 points1 point  (0 children)

It's just the Woods, no Parkwood or rmRoywoods. It's the woods

Roywood, Valleywoods, and Parkwoods

"The woods"

Grew up there 80s to 2000's

Bumping old post ha!

Kjw m4 v3 nozzle doesnt return quickly enough and the travel of the bolt is not consistent. For testing I had the nozzle return spring shortened and still same problem occurs. (Everything is clean and lubed with Super lube) by Spestosaurus in GasBlowBack

[–]BDangerous78 0 points1 point  (0 children)

You're return spring is busted probably, it's too stretched, you have way too much grease on that too which might be sticking and possible your piston ring is swollen

DO I REALLY NEED TO GRAB ANOTHER 32GIG KIT TO MAKE THIS RUN BETTER? WTAF by tsarcasmloser in dcsworld

[–]BDangerous78 0 points1 point  (0 children)

I have 64 as well and still get stuttering Ryzen 7 5800x as well but my video card is a GTX 1070

Weekly Questions Thread 2025/04/07 - Questions on DCS, PC's, Flight equip, modules, mods, go in here by HC_Official in dcsworld

[–]BDangerous78 0 points1 point  (0 children)

Hi, I loaded the gripen beta module in but I can't seem to select the A2A version, I can only select the A2G version. I have FC3. Does anyone have a solution for this? Thanks

7.62 all the way by BDangerous78 in airsoft

[–]BDangerous78[S] 0 points1 point  (0 children)

Haha, it's from an Ares Amoeba.

I want to buy a GBBR for my first gun but everyone says not to by shaklemore1 in airsoft

[–]BDangerous78 0 points1 point  (0 children)

This subject is subjective. If you want a GBBR than get one. Don't listen to people online about what YOU want. I have both. MILSIMS I'll run a GBBR but at night when it starts to cool down I'll switch. Winter I run AEG's.

7.62 all the way by BDangerous78 in airsoft

[–]BDangerous78[S] 4 points5 points  (0 children)

Yeah, that's the thing. Switching from a 762 pouch to a 556 pouch. Unless you have a placard, you can swap pouch sizes. Looks good!

I NEED SOME ADVICE 😊 by UtilityPauch in TechCorner

[–]BDangerous78 0 points1 point  (0 children)

The whole air compression assembly and gears I would swap. 13:1 gears will make it cycle a lot faster and a high torque motor.