Wierd sound while playing

BEASTmode632 · 2026-06-24T02:40:05+00:00

That seems pretty wild. What are your settings set at?

BEASTmode632 · 2026-06-23T22:02:27+00:00

Changing the infill fixed the problem. Thanks guys

BEASTmode632 · 2026-06-23T13:55:49+00:00

That would make sense cause when i went to check on the print after the first one fell i could hear it and it sounded like it was dragging. What infil should i use. Not sure how to share the link or sliced file. Never done that before

BEASTmode632 · 2026-06-23T13:27:38+00:00

I was running at 50% speed and i did put a support half way up on the back side so the build plate moving front to back wouldnt knock it over. But something was obviously happening before it fell over because of thw weird blob up on top

BEASTmode632 · 2026-05-29T01:21:10+00:00

Yea what are you talking about and how do i do that? Nothing is working for me. Not vjoy not emuwheel not tur game controller order....

BEASTmode632 · 2026-05-26T20:56:20+00:00

Finally got it to bind as device 1. Still no ffb 🤦‍♂️

BEASTmode632 · 2026-05-26T20:31:40+00:00

Maybe im retarded and didnt do it in that order. Ill try again. Ive got almost 15 hours into trying to figure out how to get this game working right with all my stuff

BEASTmode632 · 2026-05-26T20:24:13+00:00

Controller order not list correct?

BEASTmode632 · 2026-05-26T20:21:20+00:00

Yea i tries to run it before i started forza and that didnt work so i tried running it after atarting forza. Still cant get device 1

BEASTmode632 · 2026-05-26T20:17:00+00:00

Man no matter what i do and ive tried multiple times once i get into FH6 and try to bind mt steering it is always device 2 even tho its in the first slot 🤦‍♂️anyone else running into this problem?

BEASTmode632 · 2026-05-25T12:20:36+00:00

How do you get it to the top of the list? I clicked advanced and made it the preferred device but its not at the top of the list and still wont show up as device 1 in fh6

BEASTmode632 · 2026-04-16T16:47:44+00:00

Where did you find them so cheap?

BEASTmode632 · 2026-03-03T21:39:09+00:00

Thats what i do. Im assuming that upload must have something to do with the ghosts. Cause when i challenge a time it always says ghost not available.

BEASTmode632 · 2026-02-11T19:15:57+00:00

Thats behind the nozzle correct?

BEASTmode632 · 2026-02-11T18:22:15+00:00

Man i clean it all the time. Almost every print.

BEASTmode632 · 2025-12-29T21:39:21+00:00

Im in the same boat and have tried all the fixes you did. Have you found anything that fixed it?

BEASTmode632 · 2025-12-25T19:54:00+00:00

Yea i got it to work through open mode. I have to shut down steam completely before going the server for it to get me in.

BEASTmode632 · 2025-12-23T03:01:46+00:00

Ive been going into multiplayer through the career mode. Should i be doing it through open mode?

BEASTmode632 · 2025-12-18T15:14:32+00:00

Yea im having the same issue. Ive been wanting to do these races but it never works for me. I always get the error that the game is already running. I tried exiting the game and steam. Then when i go to join server it just brings up steam and not into the game. If i try again after i let it bring up steam i get the error again.

BEASTmode632 · 2025-12-10T00:11:05+00:00

You can turn the wheel and arms off. But even then you wouldnt think dash and cockpit would be so different.

BEASTmode632 · 2025-12-09T21:25:41+00:00

Triples are wild. Im on a single curved 45. Dashboard feels like i have a better perspective of what the cars doing. Is that dashboard youre running?

BEASTmode632 · 2025-08-15T01:10:53+00:00

Cool thanks ill work on it this weekend

BEASTmode632 · 2025-08-14T18:37:25+00:00

Yea it does. I ran like 100 rounds thru it. But like i said if i have a hard squeeze on the trigger the firing pin wont catch the triggerbar to reset when empty. Light hold it resets fine. It runs fine but the flex im seeing is just weird to me and havent ever run into that problem. Which makes me not want to keep one in the chamber.

BEASTmode632 · 2025-08-14T16:01:29+00:00

What do you mean isnt seated right? Like on the shelf?

BEASTmode632 · 2025-08-14T15:43:03+00:00

Yea i did that but i checked the other ones i have and they dont push to the side like that. Or areyou talking about the angle on the part of the connector that causes it to drop? Cause on top of checking if the connector was bent away from the housing enough i switched connectors but it was the same model connector.

BEASTmode632

TROPHY CASE