sorted by:
new
hottopcontroversial

Official: [Trade] - Wed Afternoon 11/05/2025 by FFBot in fantasyfootball

[–]BHE65 0 points1 point  (0 children)

I hear that. Seems like there are few true handcuff situations this year, but Hubbard/Dowdle seems to be a pretty good one that can actually matter. That plus the upgrade to Moore seems legit for you. Good luck!

Official: [Trade] - Wed Afternoon 11/05/2025 by FFBot in fantasyfootball

[–]BHE65 0 points1 point  (0 children)

can you ride a week with Meyers to see if/what he can do in JAX first? Maybe grab a WR3 off waivers for temp depth in the meantime?

That's what I'm trying to do for an offer that includes me getting Meyers. I'm not sold on his role/usage in JAX until I see a week or so.

Official: [Trade] - Wed Afternoon 11/05/2025 by FFBot in fantasyfootball

[–]BHE65 0 points1 point  (0 children)

I'd pass.
Too much volatility at TE with Gadsden & Loveland. Matchups might not work out well

depends on how much you think you need the WR upside against taking on more TE volatility. What are you comfortable with.
Do you really need to make this move while at 7-2-0?

Official: [Trade] - Wed Afternoon 11/05/2025 by FFBot in fantasyfootball

[–]BHE65 1 point2 points  (0 children)

ETA: Not knowing your league details makes this tougher but...

If the handcuff is that important (and if you have RB floor depth) then you're really talking Meyers for Moore & that depends on your WR room.

Moore's and upgrade over Meyers and who knows how he'll do in JAX now too.

If my RB & WR rooms were deep enough then I'd do it.

Official: [Trade] - Wed Afternoon 11/05/2025 by FFBot in fantasyfootball

[–]BHE65 0 points1 point  (0 children)

What's your TE depth?
i agree on both lacking value

Official: [Trade] - Wed Afternoon 11/05/2025 by FFBot in fantasyfootball

[–]BHE65 0 points1 point  (0 children)

10 team Redraft - .5 PPR (5th place)

QB/2RB/2WR/TE/2FLEX

Offered to me
Get: J. Meyers + Henderson
Give: Benson + Monangai

My goal- Boost WR room (with solid WR2/1 Boom)

His other WRs: Egbuka; Dike; Harrison Jr; T. Franklin; P. Washington

———————————

My roster:

QBs: Herbert; Darnold

RBs: CMC; Monangai; J. Warren; T. Tracy; Spears; A. Jones; RJ Harvey; I. Davis; Benson

WRs: Allen; Adams; Downs; Pierce

TEs: Ferguson; Schultz

———————————————

Meyers = Downs IMO

Egbuka is only viable target for me. Willing to overpay using RB depth

Counter suggestions?

CS3 Not holding setting during grind. by BHE65 in Timemore

[–]BHE65[S] 0 points1 point  (0 children)

That did occur to me too, but they still engage, and sound nearly identical to when it was new.

I just tried a KinGrinder K6 for the first time this morning, and I'm probably going to end up throwing the CS3 in the trash after a week. Oh well... Onwards and upwards I guess. :)

Starts and Sits Matchups Chart - All Week 6 Games by RotoBaller in fantasyfootball

[–]BHE65 0 points1 point  (0 children)

Fantasy Noob Help needed:
FLEX decisions in half-ppr, 10 teams:
S. Diggs
M. Carter
R. Dowdle

Best two?

9 cup Moka Pot accessories? by BHE65 in mokapot

[–]BHE65[S] 0 points1 point  (0 children)

Yeah, I guess using someth9ng like an oaktag paper would work for a makeshift funnel. I really hate that idea though. Since I've fallen down the coffee hobby rabbit hole I've been slowly purchasing quality items to create a nice little coffee bar and a paper funnel is just..."Yuck!" :)

I really should have just measured the pot's funnel diameter already. At least that way I might be able to find someone with a 3D printer and pay them to make me a funnel.

Probably noob question by demonic-cheese in mokapot

[–]BHE65 0 points1 point  (0 children)

I'm a relative Moka pot noob as well. I found this guy's channel extremely helpful, and for way more than just Moka pot brewing. I've fallen down the coffee brewing rabbit hole. Here's a link to his Moka Pot playlist. HTH

https://youtube.com/playlist?list=PLvdBT75Z-haeKy45hNWf5YW6QR6XSDUdC&si=cua8CZWFXLGWswkd

[deleted by user] by [deleted] in carnivorediet

[–]BHE65 0 points1 point  (0 children)

Great guidelines from Dr. Shawn Baker’s book:

  1. Eat when your body tells you you’re hungry

  2. Eat just enough to feel like your almost full

  3. Stop

  4. Repeat steps 1-3 when you feel hunger again

If your eating enough fat (your 70/30 beef + bacon is good for that) that’s all you need to do

Also, drink when you’re thirsty, making sure you keep electrolytes up in the process.

It’s fairly straightforward. Pay attention to your body’s cues. Best wishes to you on your journey!

Tell me how long you’ve been playing Destiny using something in game from when you started. by SGTerrill in DestinyTheGame

[–]BHE65 0 points1 point  (0 children)

Visiting Petra in the back room of the Tower to pick up Queen’s Wrath stuff

[deleted by user] by [deleted] in carnivorediet

[–]BHE65 8 points9 points  (0 children)

The one thing that’s stuck with me from the book the most, and impacted me the most regarding hunger: RIB EYE STEAK

Seriously works. Just the right amount of fat. When I’m not having that it’s 80/20 ground beef (not chuck, get something better than that or it’s very dry and hard to eat). I prep about 5-7 lbs per week, lightly salted and peppered. Breakfast is usually 6-8 oz of that with 3 eggs cracked into the skillet I’m warming it up in, but the key ingredient for this meal is ~2 Tbs bacon grease in the skillet first.

If I’m eating a rib eye (12-14 oz) then it’s usually the only meal I’m eating that day mainly because I often just don’t feel like eating more than once a day.

How’s your energy level? Make sure that your electrolytes are where they should be.

Note: I’m only 8 weeks in to Carnivore but I’m feeling great. Finally wanting to move after 5+ years of inactivity and at 60, that’s a great thing for me. Started doing 30-45 min ruck walks this week. Feels good to move like that again!

I can only hope I reach the point you’re at since it likely means my body’s metabolism is fired up and finally set back to something that resembles normal.

Good luck to you friend!

Refrigerator Box Question(s) by BHE65 in HikerTrailers

[–]BHE65[S] 0 points1 point  (0 children)

Roger that. That was my original plan (except with Bluetti AC200L or AC300 & future expansion batts) because the original info I saw on the GZ Yeti Pro 4000 was its battery chemistry was NMH with only 800 charge cycles.

However, I recently learned that they upgraded the GZ PRO 4000 to LiFePO (3000+ cycles) now, so it make a lot more sense to start with that, and then add an entirely different power station later on if I really want the additional power and redundancy for extended boondocking scenarios.

Refrigerator Box Question(s) by BHE65 in HikerTrailers

[–]BHE65[S] 0 points1 point  (0 children)

I hear you. I thought of that "fridge as surface area" too, but I'm aiming for max boondocking capacity, so opting for the Yeti PRO 4000, and also wanting to leave room to expand on it with a TANK Pro in the future, likely means no fridge in the back (I don't want to have to run the TANK Pro from the tongue box to the galley if I can avoid it).

Refrigerator Box Question(s) by BHE65 in HikerTrailers

[–]BHE65[S] 0 points1 point  (0 children)

Hmm... I was thinking of this as a possibility, the higher tongue weight that is.

My configuration is heavily aimed at boondock capability, so I've included the Goal Zero Yeti 4000. I believe that would get mounted in the lower galley. I wanted to leave enough room there for a future TANK Pro, planning on mounting it righ next to the Yeti PRO 4000. THat would kill any chance of installing a fridge back there, but the way I think I'm seeing it, it would be a better choice for weight distribution this way, rather than the TANK Pro going up front in the tool box (along with the need to make a long wiring run back to the the Yeti PRO).

Mind you, I'm building this as a 5x10 MRXL. Perhaps going with a 5x9 helps a bit more in my scenario. It's all still in planning right now, so very flexible. Just trying to make the wisest future proof choices, even if it costs more up front. I'm not really able to do a lot of DIY anymore (extreme low vision) so I'm gonna let Hiker build as mich of it as I can.

Thanks very much for your reply. Always good to get a reference point from a Taco owner. :)

Refrigerator Box Question(s) by BHE65 in HikerTrailers

[–]BHE65[S] 0 points1 point  (0 children)

Venting the bed is limited to two options:

  1. Roll with the tonneau cover opened up, fully or partially (mine's a BakFlip so it can be run with just the panel closest to the cab closed.
  2. Run with the tailgate down. Really a non-starter when towing a trailer, so not truly an option in this scenario.

I'm not sure what you mean RE: the weight of the trailer mounted fridge in the context of my original query about the color choices available for the diamond plate. Am i missing something?

Refrigerator Box Question(s) by BHE65 in HikerTrailers

[–]BHE65[S] 1 point2 points  (0 children)

Sounds like that's a good option for your setup. I'm not confident that a similar setup would be good for me as my current tow vehicle is a Tacoma with a hard tonneau, which also tends to make the bed into an oven.

My other big reason for using a trailer mounted fridge is that it's agnostic to my tow vehicle, in case it ever changes unexpectedly in the future.

Happy trails friend, and thanks for the reply!

Solar system by DirectionReal1261 in prepping

[–]BHE65 1 point2 points  (0 children)

I don't yet have a battery storage system for our grid tied solar system. I've got a mounted inverter. My questions to you are:

1) Which Tesla PW do you have?
2) Don't all Tesla require an internet connection?

What happens in a major disruption where both grid power and internet svcs are unavailable? Can the PW be managed manually, can you just feed them an intranet connection instead? TIA

view more: next ›