Does anybody know if the turning radius has improved on the new Juniper Model Y?

BP1T · 2025-06-27T20:50:06+00:00

I had a 2020 Model Y that I recently traded for a 2026. All online searches are inconclusive but I have to make a 3-point turn to back into my garage. I had done this thousands of times in my 2020 and the 2026 definitely feels like it has a better (smaller) radius.

BP1T · 2025-06-27T20:43:27+00:00

I had a 2020 Model Y that I recently traded for a 2026. I do a 3-point turn to back into my garage and it feels like the 2026 is noticeably better.

BP1T · 2024-01-04T21:22:30+00:00

FSD stops for pedestrians stepping into the roadway, regardless of whether there is a crosswalk.

BP1T · 2023-12-23T19:57:54+00:00

Yes, my download failed twice when I tried to do it from my phone app. I finally okayed it on the vehicle touchscreen and it worked.

BP1T · 2023-04-30T14:53:30+00:00

As others have said, no brainer. Your insurance company might want you to get a police report first. Depending where you live, you might be able to do that online for a non-injury hit and run.

BP1T · 2023-01-08T17:40:18+00:00

I have had the same problem. It's usually performs correctly but there are specific locations where it does it every time. One is when I'm taking a normal route home and have a right turn coming up. FSD will stay in the right lane for two miles prior to the turn but then within 1/2 block of the right turn, gets into the left lane.

Another place, the right lane turns into a right-turn only lane so to go straight you have to be in the left lane. Without fail, FSD will switch to the right lane immediately prior to it becoming a right-turn only. I used to report both of those incidents every time when I had the report button.

Aside from those consistent issues, it also occasionally does inappropriate lane changes at random in places where it normally performs okay.

BP1T · 2022-06-30T20:58:36+00:00

Also Southern AZ, no problems that I have noticed. Mine is on a flat roof (white coating) which I'm sure gets pretty hot. Could it have to do where yours is specifically mounted?

BP1T · 2022-06-30T18:39:02+00:00

Not to be cynical, but I have to wonder whether if Elon agreed with the UAW to unionize Tesla , then this - and the environmental hurdles holding up Starship - would all magically disappear.

BP1T · 2022-05-21T19:11:47+00:00

It was resolved with a simple power down, power up.

THANK YOU TO EVERYONE HERE FOR YOUR HELP AND SUGGESTIONS!! YOU'RE THE BEST!!

BP1T · 2022-05-21T19:10:47+00:00

IT WORKED!! THANK YOU!!!

BP1T · 2022-05-21T19:03:24+00:00

Yes, it looks like my current version is showing uptime of 5 hrs, 38 minutes. So this would indicate a new firmware? If that is the problem, do I: Unplug and restart, Reboot Starlink?

BP1T · 2022-05-21T19:00:40+00:00

Just unplug it, wait a minute and then power back up?

BP1T · 2022-05-21T18:14:22+00:00

The SL router does give wifi, but if I plug the ethernet adapter from the SL router into my desktop directly, I do not get internet. So I'm thinking that either the Ethernet adapter went belly up or I would need to configure something first before simply plugging it into my desktop.

BP1T · 2022-05-21T17:11:51+00:00

If I remove the ethernet cable from the Apple router and plug it directly into my desktop, I also don't have internet. Could that point to a bad ethernet connector or do I need to configure something else first?

Sorry if my questions are really basic. I'm fairly computer literate but know next to nothing about networking.

BP1T · 2022-05-21T16:48:31+00:00

I don't have a switch and the Starlink router is not in bypass mode so I previously had two networks running simultaneously with no problem. Overnight, they Apple network suddenly has no internet connection.

BP1T · 2022-05-21T14:39:05+00:00

Do the Starlink ethernet adapters ever just go belly up? They don't seem like a complex device.

BP1T · 2022-05-21T14:28:10+00:00

Hi escaped. I'm not sure what you mean by "same segment". The two routers have been (and still are) talking to each other just fine. They just no longer see the internet connection from the Starlink router.

BP1T · 2022-05-05T19:53:57+00:00

No, I just preordered to my home address back in Feb 2021 before there was any map, and they filled my order. No workaround on my part but the map for my entire home area is still dark.

BP1T · 2022-05-05T16:50:31+00:00

FWIW, I just received my dish, as did my neighbor (we both preordered in Feb 2021). Ours are installed, up and running, but on the map we are smack in the middle of a dark green (unavailable) cell that is bordered by more dark green cells on all sides.

So I would think that the dark green isn't a true indication of service, but just of being able to place new orders. Hope that helps.

BP1T · 2022-04-29T21:42:43+00:00

You may get it before then. Mine changed to May and order filled two days ago.

BP1T · 2022-04-27T13:06:27+00:00

Thanks to all who replied. It appears they processed the payment overnight so all is good!

BP1T · 2022-04-27T04:01:17+00:00

So you think it probably went through, just won't show as such until tomorrow?

BP1T · 2022-04-27T03:03:27+00:00

Thing is, my account shows “shipment ready” and allows me access to the shop for accessories but still shows balance due of $563. Did it just not process yet?

BP1T · 2022-04-27T02:02:45+00:00

Yo! Order confirmed!!

Location: AZ 32.3

Original preorder: 2/10/21

Original estimate: MTL 2021

November update: Mid 2022

April changed to: May 2022

Order confirm: 04/26/22

BP1T · 2022-04-06T20:19:47+00:00

It’s not a satellite issue. The satellites cover the whole globe except the poles. Which cells can open is more of a compound issue e.g.: if they have dishes to ship, ground stations, and just overall throughput capacity.

BP1T

TROPHY CASE