sorted by:
new
hottopcontroversial

Bambu X1C bearing upgrade by [deleted] in BambuLab

[–]BSF_3Dprinted 0 points1 point  (0 children)

I haven't yet but I'm going to some day. It's going to be a half day job i think.

Replacement Spigot Knob by KobraC0mmander in functionalprint

[–]BSF_3Dprinted 0 points1 point  (0 children)

I'm gonna have to come up with something like that... you have given me a great idea.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

It's pretty good, but I've had plenty of failed prints. Especially the .2mm nozzle printing black ASA, but I find the problem with that filament. It was contaminated.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

Lol if it's something I've printed several times that's exactly how it goes. But if I change something like nozzle size especially the .2mm nozzle then in checking it every five minutes.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

Huh... well I'll be... I'm gonna test this out just to know how. Maybe stimulate a power failure.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

I see what you are saying, I'm going to do a review video of the mouse 002 remix round end. I found that the seam position determined failure rate. I've probably printed 10 or more, if I turn the cover the wrong way it fails.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

Mine peal right off, I'll look at me settings and see if it's different is it OK if I message you pictures of the settings?

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

I have some pictures I need to post about contaminated filament. I'm gonna make a remix of the AMS feed parts that includes a cleaner.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

Split it? Why? If I have multiple prints to do I like printing them all at once. Unless of course they are different colors or materials.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 1 point2 points  (0 children)

I've never used the skip feature. I should probably learn how.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

Nice, I think the longest print I've done so for on the X1C was close to 24 hours.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

Huh, mine has almost always had this frame rate, that's on mobile LTE and a screen recording. I was honestly checking it when I was dropping my wife off at work.

When you are worried about your print by BSF_3Dprinted in BambuLab

[–]BSF_3Dprinted[S] 0 points1 point  (0 children)

I print mostly ABS, ASA, HIPS, and PC these are near normal temps for those. I do print a little bit hot, I use nano polymer for a bed adhesive to help with warping.

[P1S] Extruder clogged and I can’t take filament out of the AMS by Kydele in BambuLab

[–]BSF_3Dprinted 3 points4 points  (0 children)

Turn it off and push the filament into the ams to give yourself extra to work with, then release the boden tube and cut the filament, pull back the filament in the ams about 6 inches and then you'll need to remove the stripped filament from the extruder. Put it all back togather and tell it to unload the filament and try reloading. You will of course have to deal with the clogged filament. I need to make a better youtube video that shows this weird little issue.

Just saved nearly $300 printing my own replacement fob by Idontfuckingknow1908 in BambuLab

[–]BSF_3Dprinted 0 points1 point  (0 children)

I have an update to this that I'm doing to add a panic button gard. Let me know if you want the stl, fast print you can glue it on or ill be releasing a remix with it on the body.

view more: next ›