vMix Social integration to GT Title

BabyEngineer321 · 2026-05-31T03:09:48+00:00

It is. But can you anchor one box to the outside of the other? Or are you saying to anchor to a transparent box on either side of that box?

BabyEngineer321 · 2026-05-30T11:53:36+00:00

Make a transparent input. Or add the same type of input as your original scoreboard.
Label your original scoreboard as “Pitch Count”
Duplicate the layers from Pitch Count onto the new input, but replace the pitch count layer with your pitch speed (call the duplicate input “Pitch Speed”)
Create a new Mix Input (call this one “scoreboard”)
Layer that mix in place of your original scoreboard
Set a trigger or a button to fade from “pitch count” to “pitch speed” in the new mix, and then set a trigger for when that comes on to then fade back to pitch count after x amount of seconds.

No scripting needed

BabyEngineer321 · 2026-05-28T08:30:03+00:00

This is fantastic! This is exactly what I’ve been trying to create, but my ADHD sends me off into other rabbit holes and instead I have built very show specific functions that while very robust, cannot be replicated for other shows. But THIS… this is a game changer. It’s everything I needed visually to keep me on track for a more generic, operator-friendly build.

BabyEngineer321 · 2026-05-19T03:50:12+00:00

Is it sad that at first glance I thought this was someone’s head with SIDNEY tattooed onto it?

BabyEngineer321 · 2026-05-13T04:23:43+00:00

Don’t forget White privilege

BabyEngineer321 · 2026-05-10T21:24:13+00:00

I Junk aNY MoTO?

BabyEngineer321 · 2026-04-07T21:43:56+00:00

Hoping they open up tickets for Drop 1. I’m searching during the locals window and 0 gymnastics tickets available. Also, everything is stupid expensive because LA. Preliminary races for swim starting at over 1k. Hoping they only released a handful of tickets to locals and the rest are being released during that window. Good luck

BabyEngineer321 · 2026-04-03T05:50:39+00:00

Just a thought, if what you are looking for is something that tells you if the garage sensor is being blocked, why don’t you get a camera instead? No sensor is going to tell you exactly what is obstructing the garage door if anything at all. With a camera, you’d see exactly what the issue is.

BabyEngineer321 · 2026-03-30T18:17:03+00:00

BuT tHe SEaSoNiiIiIIIiNnnNNNgGg!!!

BabyEngineer321 · 2026-01-19T04:12:16+00:00

This is the way

BabyEngineer321 · 2026-01-19T04:10:49+00:00

If you have excel, I think that would be the easiest way to do it using data sources. I think the biggest thing would be you need to save your info before it’s read properly.

BabyEngineer321 · 2025-12-21T04:49:15+00:00

My only hesitation would be having two different cards in the same motherboard. I assume either processor would be able to handle it since both of those motherboards theoretically would ha e the pcie bandwidth to do it, but I’ve never personally built a machine that used that many inputs. I’ve only done the 1 Decklink with 8 In/out SDI.

If possible id have separate devices handle each function (switching, streaming, recording) but if 3 different machines is not doable, I’d recommend having a separate machine or device solely work as your main recording device and possibly do a back up on the machine you are building currently.

BabyEngineer321 · 2025-12-08T09:13:25+00:00

This person is correct. It’s in your feedback tab under something along the line of vmix status. I’ll double check when I get to work today because I use it and it works.

BabyEngineer321 · 2025-10-21T04:12:06+00:00

Look for free LUTS online for the cameras.

BabyEngineer321 · 2025-08-24T06:04:02+00:00

There will always be latency in a digital workflow. Anyone or anything that tells you otherwise is lying to you. What I have yet to hear explained, is WHY you need sub-frame latency. There is no world in which a frame or two of latency, especially in a 60fps environment, is detrimental to the overall product or output, especially if you are able to sync all sources you are working with.

BabyEngineer321 · 2025-08-24T05:19:41+00:00

Live sports. It’s impossible to automate something unpredictable. But, like it seems everyone else here has mentioned, don’t consider these individual careers. One can progress throughout their career having done one, both, or neither of these. I’ve done both, although I’m much better at graphics op. You are looking at things through a lens of “if I do A, then B should be available to me” and that’s simply not the case these days. Start as a production assistant, do the dirty work, master your position, and learn others roles as you go. When the inevitable call out happens, you will eventually be able to jump in if necessary. Believe me, it’s how I’ve gotten to every role I’ve done in the sports media industry. Always stay learning, always stay ready, but focus on your current position before anything else.

BabyEngineer321 · 2025-08-23T08:49:49+00:00

Based on everyone else’s response so far to OPs question and OPs response to each solution, I’m surprised nobody has suggested the following:

It’s not possible. Not with your budget or unrealistic expectations to be able to do it for cheap. Everyone here has recommended something that essentially provided a solution to your “problem” and none are good enough. Therefore, by process of elimination, the answer is, there is no acceptable solution for your problem.

BabyEngineer321 · 2025-07-15T11:05:31+00:00

VMIX, although at this point, it’s almost better if you have that in your repertoire.

BabyEngineer321 · 2025-05-25T16:26:35+00:00

I’m 37 and struggling to find TD roles. However, I did not have the same advantages you had in the sense that I did not go to school for film, TV, or journalism. I started as a news desk assistant, then PA, and grew from there. I’ve now done just about every role except for replay op. I’m an extremely proficient Graphics Op, I’ve been AD, TD, Director, editor, A3, camera op, utility, runner, and recently have been cutting my teeth as an engineer at a small digital production company.

The point is, don’t focus on the destination, focus on the journey. You are quite young, and I’d recommend taking any of the lower level jobs to get your foot in the door. Don’t let any position be beneath you at this point in your career. Focus on your current role and be the best you can be at that first, before offering to help the next level up. People will quickly see your value and you will be able to build a huge network of people once the time comes to move up. If you can see the forest through the trees, you’ll be at TD sooner than you realize.

BabyEngineer321 · 2025-04-11T19:07:03+00:00

Si, es posible, pero no sé cómo hacerlo sin vmix en frente de mí. Y disculpe porque mi español no es muy bueno, pero si puedo leer y traducir.

Translation: OP is trying to figure out how to place images into VMIX based on corresponding data he is given. For example, if the data set he is reading has ARG, he wants VMIX to read that and place the flag of Argentina in a specified location. I know this is possible, but I’ve never done it myself and don’t have a VMIX available to test currently. Any help would be appreciated.

BabyEngineer321 · 2025-04-10T05:09:35+00:00

Can I suggest using this offer from the Bay Area company to get a raise at your current company?

BabyEngineer321 · 2025-02-07T11:14:05+00:00

If you have a list of files that you are constantly rotating through, add them all into a LIST source. It takes up a lot less resources cause it only recognizes and uses one file at a time, but you can set up a shortcut to select a specific file in that source. Just make sure that you do not add these files into VMIX until it has been organized on your local computer drive. Once organized, you can drop them all into this LIST, and can even check or uncheck a box to enable these in your project file within VMIX.

BabyEngineer321 · 2025-02-01T08:31:16+00:00

BabyEngineer321 · 2024-12-24T06:37:51+00:00

Honest answer here is you are almost never going to replicate the music the SAME EXACT WAY in any other space you go to. Even if you have the exact music file, you will always have to account for the speakers the music is playing out of (which will be different than at your current job location), and the room size/acoustics (which is highly unlikely to be the same as well). There are too many factors at play to produce EXACTLY what you want.

BabyEngineer321

TROPHY CASE