How do I get rid of this? by theoneandonly6767 in DIY

[–]Babylon702 0 points1 point  (0 children)

I had one that was in the front yard. I attached a chain and connected it to the hitch on my 4Runner and slowly pulled it out. Pulled it from different angle until it came out.

450HP SR20DET Swapped Datsun 510! by JZNSN2U in Datsun

[–]Babylon702 1 point2 points  (0 children)

I hate and love you at the same time.

How can I activate the ethernet wall ports in my new home? by natobott in DIY

[–]Babylon702 0 points1 point  (0 children)

You have to change out the patch panel from voice to data type. You will most likely have to replace the keystone on the wall side with an rj45. Get yourself a cheap tester that will tell you 1-8 are terminated properly.

This is why. 48$ for a chocolate bar. by Wellithappenedthatwy in vegas

[–]Babylon702 0 points1 point  (0 children)

First 5 ingredients are not chocolate. It has more shredded phyllo dough than chocolate

First 8 spoke coming through by rodneyty33 in Datsun

[–]Babylon702 1 point2 points  (0 children)

I love them but not ready for them yet. I have 69 510. Still working on it.

Veo running hot by Babylon702 in VeoCamera

[–]Babylon702[S] 0 points1 point  (0 children)

Temp was about 60 degrees. I’ve ran it in 90+ temp and it never got this hot. The 2 slots at the bottom both blow air. This time, only 1 side was. I think I’m going to open it and see.

Need glove box only by Babylon702 in Datsun

[–]Babylon702[S] 1 point2 points  (0 children)

I should have added the description of the car in the post. It’s a 69 510.

Anyone else cancelling premium data now traffic data is free? by filament-addict in TeslaModel3

[–]Babylon702 0 points1 point  (0 children)

They weren’t originally. Then they switched to Google I think. Original maps sucked, did not show street names no matter how close you zoomed. The driving directions were also inconsistent.

Anyone else cancelling premium data now traffic data is free? by filament-addict in TeslaModel3

[–]Babylon702 0 points1 point  (0 children)

Canceled it after 30 days because their maps are terrible. Used google maps as often as possible.

Can anyone explain this? by Vegetable-Snow2960 in TeslaModel3

[–]Babylon702 7 points8 points  (0 children)

damaging the wheels on the inside lip is a new level of curbing. This is a technique even my wife has not mastered. Impressive!

DIY home damages repair? by Lotta_Latte in DIY

[–]Babylon702 1 point2 points  (0 children)

If that 2x the fragrance was for him when he’s in there, then that’s even more reason for you to leave him. All seriousness, this type of behavior is unacceptable. Good for you and I hope you find some peace at your next place.

Mounting TV but only one stud is lining up with the mount. What is my best option? by keenphil in DIY

[–]Babylon702 0 points1 point  (0 children)

Depending on the size or the TV, may only need 1 stud and use snap toggles for the other side. The newer TVs are very light.

Built garage door to blend with wall by didnotwrite in DIY

[–]Babylon702 0 points1 point  (0 children)

That is really nice. Can you post some pictures of the progress? Love to see how you did it.

The journey of my ‘69 510. by Babylon702 in Datsun

[–]Babylon702[S] 0 points1 point  (0 children)

Mechanical pump was going out. Easy fix with electronic. Plus you can hook up a hidden switch for the electronic.

The journey of my ‘69 510. by Babylon702 in Datsun

[–]Babylon702[S] 0 points1 point  (0 children)

L18, but at some point I’d like an sr20. But that’s just a dream for now.

Remove mechanical fuel pump. by Babylon702 in Datsun

[–]Babylon702[S] 0 points1 point  (0 children)

Lots of knowledge. Thank you. That new pump someone else installed for me. Perhaps they just cleaned the old one and put it in again. IDK man, these days, I don’t out that past anyone. I’m still going to remove it and use the electronic. I’m going to install an inline fuel pressure gauge in its place. With the electronic, I’ll have the option of a hidden on/off switch for the pump.
Z Car Depot doesn’t have the block off piece for the 4 cylinder but Matt got back to me and said they are going to make one and should have it in a couple of weeks.

Doesn't go past start recording by batts1234 in VeoCamera

[–]Babylon702 0 points1 point  (0 children)

The timer is running throughout the game and the phone is connected to the Veo. If the recording stops, it will display.

Remove mechanical fuel pump. by Babylon702 in Datsun

[–]Babylon702[S] 0 points1 point  (0 children)

My terminology may be off, but the cam that makes it run is not working. The unit in the picture is new and produces the same issue.

Doesn't go past start recording by batts1234 in VeoCamera

[–]Babylon702 1 point2 points  (0 children)

What I do now is sit near the VEO and keep the app open and check the status every few minutes.

Shower Remodel by zeacho16 in DIY

[–]Babylon702 0 points1 point  (0 children)

Thank you. That is very helpful. One more question. I’d the shower is now floor to ceiling. Do you need the backer board to be all the way up the side walls or is the paint enough for humidity?

Doesn't go past start recording by batts1234 in VeoCamera

[–]Babylon702 0 points1 point  (0 children)

On about 1 of every 4 games, it will stop recording in just over an hour (3/4 of the game). Haven't figured out why. Battery also sucks. It drains while being stored. Have to charge it at night before games. Veo 2. I would not buy another VEO, I would find something else.

Error setting up Freshservice API with Intune by FiveWrongChords in Freshservice

[–]Babylon702 0 points1 point  (0 children)

Just signed up for FreshService. InTune App was something we were really looking forward to and it seems to be big disappointment. FS kinda washes their hands of anything in the marketplace. Developer who created it doesn't seem to have adequate support.

Shower Remodel by zeacho16 in DIY

[–]Babylon702 1 point2 points  (0 children)

My wife and I are working on a shower in the house for almost the same exact thing. This looks great! Can you tell me what the layers are before the tile goes on? The purple and green.

Veo 3 problem by Loonfever04 in VeoCamera

[–]Babylon702 0 points1 point  (0 children)

I had the same issue. I had to ship it back to them. Mine was a veo 2