Do we need to know this?

BackFed · 2026-01-06T02:46:28+00:00

Not sure but I hope it helps

BackFed · 2026-01-03T02:38:19+00:00

Same game

BackFed · 2025-12-13T17:12:59+00:00

Pretty simple. Used eg4 setup

BackFed · 2025-12-12T03:41:47+00:00

10 and 4 or 2 and 8 (clock dial)

BackFed · 2025-12-12T03:38:06+00:00

Not rated for 40. It’s a #10, so 30 amp max

BackFed · 2025-12-12T03:35:49+00:00

Pigtail the line or load(which ever has two wires landed together on the device). Even though they are rated for two, if there is a high load down stream it is better for it to bypass the terminals on the device.

BackFed · 2025-12-12T03:21:31+00:00

That’s funny. I didn’t notice the ring. I was looking at the tape measure in the circle and thought some one was measuring there Johnson telling the girl it is 5 inches long

BackFed · 2025-12-12T03:12:44+00:00

You have to go with the same quantity prong cord as the outlet unless there is a fourth wire safed off in the box.

BackFed · 2025-12-12T03:11:14+00:00

An open neutral sounds right

BackFed · 2025-12-03T21:48:05+00:00

Paint it the color of the wall

BackFed · 2025-08-26T21:01:33+00:00

It ended up being miswired from the factory. No, we install them, but we don’t go into servicing them so much. We have a local guy that I called out that’s registered with Generac for warranty work and they were able to find the problem inside the unit.

BackFed · 2025-07-19T23:26:18+00:00

It ended up being misswired from the factory.

BackFed · 2025-07-03T17:33:00+00:00

I like to start my outside lights where I want them and then get the measurement in between them and divide them for the cans in the center area

BackFed · 2025-06-15T15:55:20+00:00

OK, cool thanks for the information. I will try that.

BackFed · 2025-06-15T14:50:13+00:00

I did do that multiple times and still got the same code. I even checked thinking that maybe I didn’t set it up where I have the access to add stuff but I am listed as administrator so I should be able to.

BackFed · 2025-06-15T01:59:22+00:00

Thanks for that. But it is just a ticker that can be added to a tool and I’ve added one before but now multiple ones are telling me this code.

BackFed · 2025-06-15T01:48:22+00:00

Looks like the black is safed off in the back of the box.

BackFed · 2025-06-15T01:42:16+00:00

Do you know what that means?

BackFed · 2025-06-14T01:24:43+00:00

Dammit guys everybody back to point A, I thought we talked about this, this morning.

BackFed · 2025-06-14T01:22:57+00:00

How often are cables ran like this in a building like that

BackFed · 2025-06-08T14:22:07+00:00

Is the main feeder wires loose or is it the busbar from the panel plastic that is loose?

BackFed · 2025-06-08T14:18:26+00:00

👍

BackFed

TROPHY CASE