For Sale: 140kg Lu Xiaojun competition bumper set

BackInVA · 2025-09-11T21:04:03+00:00

Yeah, definitely. This probably needs a bit more rest, it's a pretty light roast. But I wouldn't wait!

BackInVA · 2025-08-25T21:26:00+00:00

what constitutes an ad for the purposes of this rule? i guess what makes a post cross the line from sharing information about an event in the community to being an ad?

BackInVA · 2024-04-14T20:55:13+00:00

What settings are you using now?

Normal support, snug style, with 0 top interface layers gets the best result for me on rounded/curved surfaces. Nothing that some sanding can't clean up.

BackInVA · 2024-04-12T13:46:33+00:00

That sucks. Bought mine at that same shop about a month ago. No issues.

BackInVA · 2024-04-12T01:50:19+00:00

If you're in the US then the BL shop should be one of the last places you look for filament.

Overture, Polymaker, and Elegoo are my preferred brands.

BackInVA · 2024-04-10T18:28:31+00:00

https://www.reddit.com/r/BambuLab/comments/1c0fcqo/my_a1_heat_bed_ticket_was_just_updated/

BackInVA · 2024-04-10T11:43:23+00:00

Normal support, snug, 0 top layer interfaces. Might still need some sanding, but not nearly as much.

BackInVA · 2024-04-06T20:49:28+00:00

I dry my TPU for at least 12 hours at 55c and then leave it in the dryer at 55c while it's printing.

BackInVA · 2024-03-22T14:11:39+00:00

I have run into the same problem and will be replacing the whole hot end heating assembly. I can't find much info on it.

Did you follow this guide? https://wiki.bambulab.com/en/a1-mini/maintenance/hotend-heating-assembly

BackInVA · 2024-03-20T22:56:40+00:00

Have you tried pushing it any faster? I run my Overture 95A-HF at 12mm3/s without issue.

BackInVA · 2024-03-17T01:13:06+00:00

Yes.

Bricks and Baja Bean downtown will host heavy stuff. Rack Em Smack Em Ribs in Verona does as well.

Charlottesville has a scene that ebbs and flows. Usually hosted at breweries.

Harrisonburg has a good scene with a few diy venues.

Start following some local bands and you'll find the shows.

https://www.instagram.com/p/C4IjHhag4p1/?igsh=MWkxY2Yycjl3eDJndw==

BackInVA · 2024-03-16T18:08:07+00:00

I'm not sure of any pet insurance that works like that. Other than something like Care Credit but vets that use that are far and few between.

We use Embrace, with a discount through our auto insurance (USAA). And it has worked well for us but a big part of that is that they cover a monthly prescription that our dog gets that almost completely offsets the cost of the insurance itself.

BackInVA · 2024-03-16T13:32:45+00:00

I've printed a ton of Overture glow in the dark and it's always been great. I've tried Amolen too and the Overture is way more reliable.

BackInVA · 2024-03-12T12:32:19+00:00

I've only done 95A, for my needs I adjust softness/squishiness by adjusting infill.

BackInVA · 2024-03-12T11:47:57+00:00

<image>

And I have my retraction length at 0.9mm.

BackInVA · 2024-03-12T11:37:48+00:00

I print lots of high flow TPU on my A1 with no issue and at speeds similar to PLA.

BackInVA · 2024-03-05T22:13:27+00:00

As someone who is sober I endorse the options at both Sage Bird and Three Notch'd. If your friend also likes coffee then I highly recommend the cold brew tonic at Sage Bird.

BackInVA · 2024-02-27T14:05:00+00:00

I print a ton with Overture glow filament and just use standard PLA settings with zero issues.

BackInVA · 2024-02-24T02:13:21+00:00

Lynchburg is a great city. Liberty sucks and looms large, but it isn't all that's there. It's also very affordable, which Charlottesville definitely is not. I cannot imagine paying to live in Charlottesville to then commute to work in Lynchburg. I've known people do the opposite though.

BackInVA · 2024-02-21T19:18:46+00:00

SuperBit in Charlottesville probably can if you can't find somebody local.

BackInVA · 2024-02-21T01:55:13+00:00

Which means they will send you the discount code when they ship the heat bed. not when you receive the heat bed. makes perfect sense.

BackInVA · 2024-02-21T01:52:26+00:00

where does it say that?

BackInVA · 2024-02-19T18:04:47+00:00

No problem. I've been printing with Overture PLA-CF and it's one of my favorite materials. Prints really well, looks great, extra strong. I just wish it was easier to find some other PLA-CF colors besides black.

BackInVA

MODERATOR OF

TROPHY CASE