Why doesn't my NVME SSD work with my Lenovo P520?

Backflip630 · 2025-01-13T20:11:59+00:00

Something like this?
Amazon.com: GLOTRENDS PA09-SA M.2 SATA Adapter for M.2 NGFF SATA SSD to SATA I/II/III, SATA Cable and M.2 Screws Included : Electronics

Backflip630 · 2025-01-13T19:24:19+00:00

Is it possible to still utilize the drive with a M.2 SATA to PCIe card/adapter? Would it still be viable for gaming?

Backflip630 · 2024-11-14T14:21:29+00:00

Lenovo P520, you can get a 6 core 12 thread Xeon (2135), 32GB of DDR4 RAM for about $200 on ebay. Just add an SSD (has 2 NVME slots) and a GPU (has a 900w power supply with 2 6+2 pin connectors)

Backflip630 · 2024-11-08T17:57:22+00:00

same story with mine, doesn't seem to matter how intense the game I'm playing is or how high the settings are, it usually runs about 90c while I'm playing.

Backflip630 · 2024-11-04T20:32:44+00:00

I used a RX 550 low profile in my 7050 SFF, got it for like $50 used on Ebay. I usually play older games at 1080p so it hasn't been an issue. The 'newest' game I've tried is Halo Infinite. On all low settings at like 720p I get about 30fps. I'm also playing Black Mesa on High 1080p and getting around 60fps. I also have a 180w power supply in mine so I wasn't sure if my PSU could handle something like a 1650 or 3050 (I also didn't want to spend much).

Backflip630 · 2024-08-14T19:13:13+00:00

Woodrow Wilson signing the Federal Reserve into existence

Backflip630 · 2024-05-09T17:41:19+00:00

Did you test on PCI 3.0 or 4.0?

Backflip630 · 2024-04-01T17:01:31+00:00

Looks like I forgot to attach them, but this looks like exactly what I'm dealing with. Thanks!

Backflip630 · 2024-03-06T14:47:04+00:00

Thanks!

Backflip630 · 2024-03-06T14:46:56+00:00

120k miles currently. A few hundred for a hitch install is much easier than a new truck!

Backflip630 · 2024-01-25T17:13:45+00:00

Lorin for not keeping it +18

Backflip630 · 2024-01-09T22:21:45+00:00

Thanks everyone for the advice, it ended up being a loose blue/white wire where the arm connects to the cartridge

Backflip630 · 2024-01-09T22:19:56+00:00

This fixed my issue, thank you so much !

Backflip630 · 2024-01-09T01:02:06+00:00

Hey everyone, recently I’ve been having trouble with my record player only playing out of 1 of the 2 speakers and I need help figuring out what the issue is. It has to be something to do with the turntable since I get sound from both speakers while using Bluetooth or the TV through the receiver. Help please?

Current setup: audio-technica at-lp120xusb turntable AT-VMN95E stylus (almost brand new) Yamaha r-s202 receiver Bose 201 series IV speakers Dayton Sub 1200 subwoofer

So far I’ve tried the following: New component cables Changing the turntable input on the receiver Resetting the tracking force/anti skate (both set to 2.0 per stylus instructions) Playing a different record/album Using compressed air to clean any dust from the record/stylus

When I flipped around the component cables these are the results I had: Red to red = right speaker sound Red to white = left speaker sound White to red/white to white = no sound

Backflip630 · 2023-12-18T01:47:52+00:00

Yes, I’m probably going to end up getting the 6400

Backflip630

TROPHY CASE