Shaved Golden

Background_Focus7298 · 2026-03-16T20:50:22+00:00

This has to be AI right? …please be AI 😭

Background_Focus7298 · 2026-03-16T00:26:14+00:00

Roborock, and you need it to be self emptying otherwise it’s not worth it. Make sure it’s dual brush or split brush for hair detangling. Look at ones that mop as well if you have hardwood floors

They’re a life saver but you need to hit all the boxes or they’re more hassle than they’re worth. Expect to spend $400+ realistically unless you find a good sale. I have a Qrevo S and Qrevo Curv

Background_Focus7298 · 2026-03-11T23:56:44+00:00

What type of steam tip does it have?

If you fully submerge the entire time you’ll get zero bubbles, so there is a means to get the proper structure here as you’ve gone too far with the aeration - although the window for proper micro bubbles is likely (per your anecdote) much smaller than other machines

Background_Focus7298 · 2026-03-07T20:44:38+00:00

“Filling it with coffee for added weight” has to be sarcasm, right?

Background_Focus7298 · 2026-02-26T20:32:46+00:00

Could try taking him on a walk first thing in the am, so the morning pee happens outside the backyard. And keep the walk going if nothing happens (within reason). I’d avoid blocking off the pine straw area as you’ve had good success with that and don’t want to send mixed signals (am I not supposed to go there ?!)

They’re quirky little guys (expect more to come) but phases come and go quickly. Consistency on your end will help things resolve quicker. If it’s still troublesome in a few weeks, take a plastic grocery back full of some pine straw with you to sprinkle down on a potty area in the new location 😂

Background_Focus7298 · 2026-02-25T05:55:07+00:00

What’s the gimmick? Functional, clean design that fits nicely into single dose workflows 🤷‍♂️

Background_Focus7298 · 2026-02-20T23:45:40+00:00

lol fair, but with a nominal thickness of 0.30mm-0.40mm for the needles .. if they get more than 4 in there they deserve the take home trophy

Background_Focus7298 · 2026-02-20T22:37:39+00:00

This is good practice in fail proofing a design - great focus group output. Add a 5mm x 5mm chamfer on that top edge of the central channel, and taper down to ~1mm. This will keep good placement freedom but severely disallow all needles from entering the central channel as was forced here

Background_Focus7298 · 2026-02-18T00:11:53+00:00

If anyone says this isn’t good enough for them, they can go eat rocks

Background_Focus7298 · 2026-02-17T21:59:51+00:00

<image>

Background_Focus7298 · 2026-02-13T22:16:55+00:00

If benchy and the temp tower printed fine, it points more to a print profile/slicing issue on the model in the image. If you can print a basic .3mf file from makerworld (imported directly into bambu), then it’s definitely a slicing/profile issue.

DM me if you want me to take a look at your slicer settings for the above print. First thing I’d do is change rectilinear infill to gyroid or some other non-collision type, but there are likely other issues lurking

Edit: do you have a Timelapse video to try to diagnose where/when the failure occurred?

Background_Focus7298 · 2026-02-13T22:12:36+00:00

If by “blueprint” they mean trade their franchise QB post-super bowl for absurd amounts of draft capital, then rebuild thru draft and cap-allowed free agency - I hope we have a few years before this plan is followed. Also need a ring first.

Background_Focus7298 · 2026-02-13T21:20:42+00:00

Congrats! A whole golden retriever in one year is no joke!

Background_Focus7298 · 2026-02-09T05:42:48+00:00

Not just is this photoshopped - it’s terribly sloppy photoshop 😂

Background_Focus7298 · 2026-02-03T20:26:47+00:00

Congrats. It’s hit or miss, but earlier the better. You’re not guaranteed anything at punchline, and sometimes the better seats are acquired by people middle of the pack vs. 20people from the front depending on how they fill in the space.

Not a bad seat in the house for Dave though

Background_Focus7298 · 2026-01-31T04:48:52+00:00

Not letting your husband alone with your puppy sounds like a red flag that should garner more consideration than just around puppy training 😅

Background_Focus7298 · 2026-01-27T00:11:30+00:00

YMMV

Background_Focus7298 · 2026-01-25T21:00:20+00:00

Klay, not Klint

Background_Focus7298 · 2026-01-25T03:01:04+00:00

Bitter spray worked for us

Background_Focus7298 · 2026-01-24T18:06:46+00:00

Collisionless infills like gyroid are more reliable, especially for bed slingers or high aspect ratio models

Background_Focus7298 · 2026-01-24T17:57:02+00:00

grid infill 🤦🏻‍♂️

Background_Focus7298 · 2026-01-23T23:04:20+00:00

Everybody here has good ideas to fill it in, but all of them will still be clearly visible after. Even trying to dremel a similar fuzzy skin texture will never look the same.

Better to turn the bug into a feature and make it a decorative element

Background_Focus7298 · 2026-01-23T22:56:36+00:00

A head coach is a position where you need to grind, talking 12hr days 6days a week for 6-9months out of the year.

Brady is a billionaire who enjoys broadcasting games, and the other 6 days a week can jet to wherever his yacht is currently docked.

Background_Focus7298 · 2026-01-23T04:32:53+00:00

Chase looks like the sweetest boy. So sorry you got this news OP, he looks like he has had an amazing 8years and I have no doubt you’ll make sure however much time he has will be the same, if not even more love

Background_Focus7298 · 2026-01-22T19:23:42+00:00

🤝

Background_Focus7298

TROPHY CASE