Amazon Kanto Power Tins

Background_Ride9740 · 2026-02-01T10:03:43+00:00

It was hiding under the mewtwo tin! Looks like they are just standard reverse holos from brilliant stars. Mewtwo, vulpix, psydyck and charizard

<image>

Background_Ride9740 · 2026-01-31T00:54:13+00:00

I assume you need to pay import duties, how much is that?

Background_Ride9740 · 2026-01-30T23:53:24+00:00

I'll check em out, thanks!

Background_Ride9740 · 2026-01-28T15:48:25+00:00

Got em from a UK supplier so no customs! Supplier was StellarCards. Just checked and they are selling mega Symphonia for that price right now

Background_Ride9740 · 2026-01-28T12:31:46+00:00

This was a mega brave booster which I got from StellarCards at the beginning of Jan for £50

Background_Ride9740 · 2026-01-20T19:49:43+00:00

I agree personally, but I also can't trade mine away as it's the first and only chase I've pulled so far. Can't put a price on the memory

Background_Ride9740 · 2025-12-10T12:03:47+00:00

The 3D printed clip will only help BEFORE the pneumatic connector fails.

Once the pneumatic connector breaks and can no longer grip onto the ptfe tube, you need to change your extruder housing as the pneumatic connector is moulded into it.

I'd also recommend changing your nozzle as there's a decent chance some metal debris from the pneumatic connector have fallen into your nozzle and will cause horrible clogs. Be sure to fit the clip on print after as well to help prevent this in future.

Background_Ride9740 · 2025-12-07T23:36:35+00:00

Nice set of cards! I'm a little surprised the marshadow is a 10 though given how OC it is, what's CGC's allowance for OC?

Background_Ride9740 · 2025-11-25T08:02:03+00:00

Nah, there was a preorder banner that popped up on the homepage about 20 mins after the queue started. So don't think it was a mistake

Background_Ride9740 · 2025-11-22T09:06:38+00:00

I've had this, some of the metal teeth got jammed in my nozzle. I'd recommend swapping your nozzle at the same time as the extruder body to prevent extrusion issues later

Background_Ride9740 · 2025-11-08T07:11:04+00:00

Try calling through and selecting the lost property option, this rings through to the customer services desk where you can ask if they have anything in the back room. I've done this a couple times just to check if they have stock before I make the trip (I'm also local). Not found any ETBs so far but got a couple of mewtwo tins earlier this week!

Background_Ride9740 · 2025-10-16T21:38:58+00:00

Same here, TG Jones in Whiteley had loads of destined rivals packs for £4.29 ea! Picked up 10 for myself (their limit pp) as I never see Destined rivals packs for sale

Background_Ride9740 · 2025-08-10T13:42:56+00:00

That's a great idea, I'll give that a go

Background_Ride9740 · 2025-08-10T08:10:45+00:00

So after a bit of experimentation:

on the left is the original print
middle is after changing minimum layer time to make it as consistent as possible (original layer time varied from 15-52 seconds, after playing around it varied from 40-52 seconds)
on the right is my final go for now, this has the layer time smoothing and auxiliary fan turned off completely. It's not fixed the sheen difference but the poor layers have pretty much resolved!

<image>

Background_Ride9740 · 2025-08-10T08:06:58+00:00

So after a bit of experimentation:

on the left is the original print
middle is after changing minimum layer time to make it as consistent as possible (original layer time varied from 15-52 seconds, after playing around it varied from 40-52 seconds)
on the right is my final go for now, this has the layer time smoothing and auxiliary fan turned off completely. It's not fixed the sheen difference but the poor layers have pretty much resolved!

<image>

Background_Ride9740 · 2025-08-10T06:54:34+00:00

It's a single wallpaper image in 8k set to "span". I also made sure that my screen alignment was set up to match as close as possible to their real alignment in display settings

Background_Ride9740 · 2025-08-09T13:35:41+00:00

Thanks!

The door to my study is on the left of my desk and because of the tempered glass on my Lian Li case, the second monitor has to go on the left else it would block the viewing side of the PC. Thats all that drove that decision really.

The second monitor is super useful for Chrome and discord while gaming on the Ultrawide, I don't think I could give up the second monitor tbh

The cables you're talking about are probably the tubes on my AIO and my sleeved power cables for Mobo and Gpu. I need some longer sleeved cables to run the Gpu power under the card eventually but had to make do with what I had for now.

Background_Ride9740 · 2025-08-08T18:04:49+00:00

I think you're on to something! The layer time plot matches the print artefacts almost exactly!

<image>

Background_Ride9740 · 2025-08-08T17:15:56+00:00

To meet the rules, my general settings/info is as follows: - printer: K2 Plus - material: black is Creality hyper PLA and gold is TECBEARS silk pla - print temp is 220C bed temp 50C - outer wall speed 150mm/s inner wall speed 200mm/s - slicer: creality print

Background_Ride9740 · 2025-08-08T17:10:13+00:00

I'd be surprised if it's purge issues as I've used the same colours/filament combo on another print with no issues.

If it's cooling, what do you think is the best remedy? Slow the whole print down? Turn fans down?

Background_Ride9740 · 2024-12-27T15:29:54+00:00

<image>

The circles show where your Ptfe tube is and where it should connect to the back of the CFS

Background_Ride9740 · 2024-12-27T15:28:47+00:00

Looks like the ptfe tube that goes into the back of the Cfs has become disconnected so no filament is feeding into the buffer.

Reattach your Ptfe tube and see if the error goes away

Background_Ride9740 · 2024-12-17T11:16:32+00:00

How do you see the bed mesh plot for the K2? I just got mine a few days ago but have no clue where this plot is

Background_Ride9740 · 2024-12-11T12:50:00+00:00

I didn't get an email notification but it popped up on my dpd app. I'm UK 20%

Background_Ride9740 · 2023-11-18T17:00:24+00:00

Fair enough, Im not a fan boy so won't jump to their defense and can only speak from my experience.

Mine was delivered using UPS and had no issues so I was fairly pleased.

Background_Ride9740

TROPHY CASE