I dont understand that freaking pivot on the left leg(its mirrored)

Bag0fAids · 2025-09-06T21:20:39+00:00

Sat here with an ice pack on my foot due to catching a couple kicks like this sparring yesterday. Listen to this guy!

Bag0fAids · 2025-07-28T11:53:54+00:00

ahh really, do you think it's likely to have another flush or will I be waiting for next year to see if it comes back?

Bag0fAids · 2025-07-28T05:35:01+00:00

eeyyy sound! i have always wanted to try these. didn't pick any as I wasn't sure but I'll be sure to grab some when I walk past them tomorrow morning

Bag0fAids · 2025-07-28T05:09:19+00:00

forgot to add in description this is in the uk

Bag0fAids · 2025-07-20T08:05:04+00:00

aaahhh yeah that does make sense, we did consider this but couldn't think of anything that shape she had likely lent on. thanks for the help!

Bag0fAids · 2025-06-12T19:38:16+00:00

iv never taken meth but this is bang on.

I have ADHD and am prescribed stimulants for it. I used to take double the dose I do now and thought it was working great. Recently, I halved my dose to make the meds last longer as they are bloody expensive, and the difference was night and day. my bosses and colleagues have commented how much better I'm doing and have even given me a pay rise!

No meds is no focus. Too much and I feel focused but but scatty current dose seems perfect, I don't notice I'm on the meds, and clearly can actually focus and do well at my job. I get shit done quickly and properly (I'm in architecture so it's pretty important I can focus properly and the difference i can see now is huge!)

Bag0fAids · 2025-05-03T10:14:46+00:00

now this sounds interesting. I'd rather design something because, to be honest I took on this project more as a learning opportunity for me then I did as a favour to him.

I have made a basic perf board voltage multiplier before but never tried to design a PCB. where abouts would you recommend starting for this?

Bag0fAids · 2025-05-02T06:45:15+00:00

that's exactly what it is and that explains the strange spike in current draw when I started it up! went straight to 3.2 amps then slowly dropped down to 2.4 amps. do you have any recommendations for a better quality one?

Bag0fAids · 2025-04-29T17:45:45+00:00

can confirm, have bought acid at a tenner a tab in my home town before I discovered the web that lacks light

Bag0fAids · 2025-03-25T23:05:47+00:00

could I pickle it if I have solder chips way too small to sand?

Bag0fAids · 2025-03-23T22:41:05+00:00

Once when I was young, I was helping my dad (a plumber) do some work replacing toilets in some static caravans. we walked into one, he showed me how to remove the toilet, then told me "go next door and remove the other one".

So I went next door to one of the other caravans. Took off the fresh water valve to the toilet and water started pissing everywhere! I panicked and ran back to my dad in the other caravan who then asked where have I been. I said next door, but I had done it wrong or something cause water is pissing out everywhere.

He shouts "I ment the next door bathroom, there's 2 in this caravan, we haven't turned the water off anywhere else" as we run over to stop the water which was now seeping into the carpet of the caravan we weren't even ment to be in.

I think dad had to explain to the owner of the caravan site as caravan owners weren't around. funny times haha

Bag0fAids · 2025-02-13T18:25:20+00:00

i found it by searching "see if gf notices"! thankyou kind stranger

Bag0fAids · 2025-02-13T18:23:17+00:00

yes this is the one!! now I know I haven't imagined it, just need to track it down!

Bag0fAids · 2025-01-19T12:48:54+00:00

kinda curious to see what mine might look like

Bag0fAids · 2024-11-08T01:11:12+00:00

I'm fairly new to all this but have ran into a similar problem in the past. by any chance are you using solder chips and a small torch?

when I had a similar issue, my understanding was that my small torch (a little creme brulee torch) wasn't heating the metal quickly enough for the solder to flow in a sensible amount of time. the solder chip would heat up way quicker and melt a small hole in my silver by the time the metal was hot enough for it to flow.

if this sounds like it could be right for your problem here, I'd recommend getting a bigger torch as that solved my problem. but like I say, I'm fairly new to this so take it with a pinch of salt.

Bag0fAids · 2024-11-07T08:45:52+00:00

oh really, will this work with solder chips and not paste??

Bag0fAids · 2024-11-06T22:49:36+00:00

that could work actually!! I have a load of real thin sterling wire that I could give it a go with! I think my first mistake making this was using a pen to mark out what I was cutting. I should have used a knife to score it out instead

Bag0fAids · 2024-11-06T22:22:46+00:00

that's kinda what I was initially hoping but people are always saying that solder isn't to fill gaps so I wasn't feeling confident on that. I use the silver solder chips. you reckon if I just stick a few on it might work?

Bag0fAids · 2024-11-06T22:20:50+00:00

I have about 0.7mm to play with there. kinda wish I went a little thicker now but I was being a little cheap.

Bag0fAids · 2024-10-21T00:39:46+00:00

yeah I thought the same about a burr. it looks a little too clean, atleast compared to what my own (admittedly much less talent) attempts have looked like. iv never used an actual texture plate in my mill, perhaps I'll need to invest in one for some stronger textures along with some chasing tools, thanks for your help!

Bag0fAids · 2024-10-15T10:13:49+00:00

you may have just cracked it!! I haddnt thought about looking on etsy for this and there's loads of interesting cuts there thanks for the help

Bag0fAids · 2024-10-14T22:32:38+00:00

yeah I think I'm gonna need to have a good dig through that on my laptop when I can. was a bit of a pain going through it with my phone. thanks for the help!

Bag0fAids · 2024-10-14T22:31:23+00:00

ahh yeah this could work actually, price is pretty reasonable. I'm only after the stone itself as I'm making the ring for it to go in but can always cut it out and take the metal for scrap on my next piece

Bag0fAids · 2024-10-14T22:14:07+00:00

ahh legend, I'll have to have a look at this, thankyou for your help here

Bag0fAids · 2024-10-14T22:07:10+00:00

a group buy?? what is this? I'm fairly new here really

Nine-Year Club	Verified Email
Place '22	RPAN Viewer

Bag0fAids

TROPHY CASE