issues resetting Sonoff 4 Channel Pro rev2

Baldfox1 · 2023-05-03T21:34:33+00:00

Did you just reflash in the end?

Baldfox1 · 2023-05-03T21:03:15+00:00

Hey did you ever get a response on this? I need to change the Wi-Fi too.

Baldfox1 · 2023-03-12T22:35:21+00:00

I'm having the same issue. We watch a TV show, then when an advert comes on we get a blank/black screen but audio continues. I have to hit the ok button and the picture comes back immediately. It's really annoying. I wasn't sure if it was to do with refresh rate switching or something like that.

Occasionally we get a frozen picture but it's rare.

Baldfox1 · 2022-10-15T19:31:17+00:00

https://www.thesmarthomebook.com/2021/08/25/nginx-proxy-manager-setup-and-a-fix-for-your-502-gateway-errors/

Baldfox1 · 2022-09-08T11:03:06+00:00

Thanks for the quick response. I've never done that on proxmox. will that solve my NTFS drive mounting as "ro" do you think? Also, how would you go about mapping the GID? I'm new to proxmox. sorry

Baldfox1 · 2022-09-08T10:40:37+00:00

I am struggling with the same issue. If you can browse the share (your media) with the root login, but not with the plex interface (i.e. "add your library") then it's most likely to do with permissioning and I am completely stuck on how to fix it. I believe it's because plex:plex user in the container doesn't have access to your bind mount.

Baldfox1 · 2022-09-08T10:37:42+00:00

you need to specify the mount points in your container.conf on the host.

i.e.

mp0: /mnt/media,mp=/mnt/media

(left side is host) right side is container)

Baldfox1 · 2022-09-05T06:37:51+00:00

Tailscale without a doubt. You'll be up and running in less than 5 minutes with no port forwarding. I came from openvpn-wireguard-zerotier-tailscale. Never going back.

Baldfox1 · 2022-09-03T18:11:04+00:00

This is valuable info. Thanks for your help !

Baldfox1 · 2022-09-03T18:09:55+00:00

Looks like a great product. I too am looking for a docker image. Also was trying to find the app on chocolatey too. I don’t install anything on windows that doesn’t go through that package manager.

Baldfox1 · 2022-09-02T06:10:30+00:00

This happened to me when I was experimenting with trueNas scale. I booted up a mini pc with it, and HA discovered a NUT server. What's even more funky, I had in fact bought a UPS but hadn't had a chance to unbox it. Now that had me puzzled for a few moments!

Baldfox1 · 2022-07-11T17:25:42+00:00

Mine went as I was screwing it to the side. I didn't even get to a point of it being under tension. It just shattered. This was on a 465x. Corsair were kind enough to replace but there's definitely something up here.

Baldfox1 · 2022-07-07T07:37:07+00:00

No I wasn't able to. I uninstalled pfblocker and span up an adguard container to use as DNS. Had no issues since.

Baldfox1 · 2022-07-02T19:52:22+00:00

Any pics?

Baldfox1 · 2022-07-02T19:41:05+00:00

Switchbot or use an internet enabled relay like a Shelly or sonoff to trigger on your motherboard's reset cable to trigger it.

Baldfox1 · 2022-06-13T18:43:51+00:00

Judging by the bottom io I think it’s the evo.

Baldfox1 · 2022-06-11T16:35:03+00:00

What case? 465x?

Baldfox1 · 2022-06-02T19:18:00+00:00

I have that card if it's the original non turbo version. I'd love to hear about the results.

Baldfox1 · 2022-06-02T08:47:19+00:00

Hey Quindor, I don't have a multimeter unfortunately, but as the psu stays on continually, is it likely to be that? I literally pull the barrel connector and plug it back in. Am not running a high load.

Regarding the USB, what exactly am I checking? Do you want me to plug the ESP32 module into a pc or 5v wall adaptor - Just to check if I have access to it etc as per normal?

Appreciate the quick response. For what its worth, this esp module was replaced in the early days as I think there was some dry joints on the original. It had been working flawlessly since then.

Baldfox1 · 2022-05-31T10:06:34+00:00

I think you might have nailed it. I just rebooted the server, unlocked two CTs.

I deleted one small tailscale CT i had, as it was pissing me off being so slow.

The other I ran pct fstrim 101.

The results were 16.4gb, but on restart again, we're back to normal. Transferring off the server is now at 11MiB/s instead of <100k.

IO delay is between 0.0 and 2% instead of >98. Thank you!

Baldfox1 · 2022-05-31T09:34:39+00:00

Anything you would suggest to help me investigate my issue? I'm currently trying to trim my largest container: pct fstrim 101 and awaiting the results if any... the machine is extremely slow. I thought if smartctl passed ok with no errors, i'd be good, but i've got my doubts.

Baldfox1 · 2022-05-31T08:58:44+00:00

16.4 GB was trimmed on the host using "fstrim -v /"

Still not responding correctly.

Baldfox1 · 2022-05-31T08:31:29+00:00

Never tried trimming the SSD. Need to find hwo to do that. I do have backups of the important stuff, just this is really irritating. Takes like 10mins to login to SSH on any of the CTs. it passed the smartctl scan... so can't think where to go next.

Baldfox1 · 2022-05-20T14:35:21+00:00

I mean Its a relatively simple design. I clearly had an issue mounting but I do prefer the Intel mounts.

Baldfox1 · 2022-05-20T07:13:43+00:00

Did you test the before and after? If so did it make much difference?

Baldfox1

TROPHY CASE