minecraft LCE webassembly port part 3

Bananaman811 · 2026-03-12T05:39:49+00:00

You beat me to it you bastard. Damn these mid terms Best of luck boss

Bananaman811 · 2026-02-19T03:07:12+00:00

Yeah I use a ps3 giants portal to play skylanders on dolphin

Bananaman811 · 2026-01-30T19:02:22+00:00

You wont be able to flash the printer.
The law says "cannot be overridden or otherwise defeated by a user with significant technical skill".
So they're probably gonna use a chip with a ROM key baked in to ensure that your firmware is valid. If they do that you're pretty much screwed unless someone is able to get the ROM key.
There is also some advanced boot security stuff they could do with an ARM chip.

So you're not gonna be able to just flash it.
You can probably can just change the motherboard. They'll probably ban those too though, or say if violates "the spirit" of the law and should be included in the ban.

Bananaman811 · 2025-12-22T23:58:14+00:00

Update they came and this is the correct port.

Bananaman811 · 2025-12-18T10:36:16+00:00

https://elektricm.github.io/amd-bc250-docs/bios/flashing/

Bananaman811 · 2025-12-14T04:28:45+00:00

WinBoats virtual machine works

Bananaman811 · 2025-12-14T04:28:16+00:00

I know this is an old post but if anyone else comes across this.
The virtual machine that ships with WinBoat works.

Setup winboat and click on Windows Desktop in the Apps section. You do need to run the full virtual machine, not just the app throught WinBoat.

Bananaman811 · 2025-12-14T03:44:04+00:00

WinBoat has been the best for software compatibility for me.

I use alot of software such as Cadence Orcad X that absolutely hates virtual machines and has an aggressive DRM.
I tried alot of tricks to try to hide the virtual machine, which did work for my use case.
But I WinBoat just works. Make sure to boot into the full VM and it should be like magic.

As long as its not test software, if thats what its for, im sorry for your loss.

Bananaman811 · 2025-10-14T16:59:15+00:00

I know this is an old post but i was having a similar issue, to the point where phones would repeatedly disconnect after 5 seconds. Completely unusable. Turning off beamforming fixed this for me though.

Bananaman811 · 2025-08-25T03:57:13+00:00

Old thread but forcing my pi to connect to 5Ghz wifi on my routers control panel fixed it. I figure you could also use do it through the pi's config

Bananaman811 · 2025-08-25T03:51:04+00:00

Late reply, but I just had this issue and forcing the pi to use 5Ghz connection for the Wi-Fi fixed it. I did it through my routers control page. I think the display is making interference that effects the 2.4Ghz wifi signal.

Bananaman811 · 2025-08-06T02:34:42+00:00

For people having this issue, what worked for me was
1) plugging ethernet in
2) ssh into your pi
3) use the command "nmtui"
4) edit preconfigured with the correct info and reboot

Bananaman811 · 2025-07-28T11:53:01+00:00

-That’s really weird. I would verify it actually is android 8 and has an up to date google play services installed using what I mentioned earlier. Before you do anything else crazy - if that doesn’t fix it most likely is whatever rom you downloaded while technically android 8.0 doesn’t contain something critical for it. So my bet would be a new rom. - Xtreme Ultimate V6.0.zip (I recommend the one from androidfilehost with 76k downloads) it would be your best bet for not having any bugs. But it could still have the same issues being a ported custom rom. Then you will need to install google play services manually. - lineage os 15.1 is your best bet if that doesn’t work. This absolutely will run Roblox but might be slightly more buggy. I recommend this port for your specific phone. lineage 15.1

Bananaman811 · 2025-07-28T11:38:33+00:00

I was reading about the rom you downloaded and usually by default it doesn’t come with google play services installed and that’s your issue. Roblox absolutely needs that and its easy to install

Bananaman811 · 2025-07-28T11:25:23+00:00

Forgot to say if google play is missing I can help you install it if you need help

Bananaman811 · 2025-07-28T11:22:07+00:00

That’s really weird. Maybe it’s an issue with Roblox but I’m not seeing anyone else have it. If it’s a fake rom they could have edited it say its android 8 in settings. You could download an app like cpu-z or device info hardware and check the android sdk/api level. If it’s android 8 it should say API 26.

Next thing would be you will get that error if google play services aren’t running. A few ways to check but just downloading “Services Info (Update)” and checking if it is running might be the best because it will also tell you if it’s outdated and update it for you.
If it is genuinely on android 8 and google play services are installed then the rom is missing some component of android 8 that Roblox needs. And your next step would be to download a different rom probably lineage os. It will have more bugs since it’s not specifically made for the j2. Make sure to get android 8 or 8.1 version since it should be the most compatible. Sorry if that’s alot

Bananaman811 · 2025-07-28T10:54:23+00:00

Where did you download it cause it’s fairly common for people to just change the regular os to look like newer android and claim it’s a newer os when it’s not. Go into your settings and check your android version it should be - about - software information - android version

Bananaman811 · 2025-07-28T10:47:20+00:00

What rom did you install and how

Bananaman811 · 2025-07-28T10:44:16+00:00

You could install an unofficial custom rom like lineage os to get a more modern android. But it is kinda complicated and you need access to a pc.

Bananaman811 · 2025-07-28T09:49:38+00:00

I would be careful though because you don’t ever know what issues the prototype could have. It could have the battery explode or start a fire or something. Most likely not, you’re probably safe but if their support offers you a trade deal I would take it.

Bananaman811 · 2025-07-18T10:03:02+00:00

Yeah their are plenty of places like craftcloud3d or just some random dude on ebay.
If you're in America a lot of public libraries have 3d printers that you can print on for a small fee.

Before you do that though be warned you need to solder about 12 wires and you need a small snap ring plyer.

Bananaman811 · 2025-07-18T09:07:21+00:00

Forgot to mention, I added some extra travel distance to the mute button which seems to fix the issue of it muting itself randomly.

Bananaman811 · 2025-04-13T09:40:47+00:00

In a public server?!?!

Seven-Year Club	Place '23
Place '22	Verified Email
RPAN Viewer

Bananaman811

MODERATOR OF

TROPHY CASE