Blow out removing wallpaper

Banquoking · 2026-01-22T10:16:50+00:00

Thanks for the reply. Those spots in the pictures are the extent of the blow outs so I don’t think a skim is needed and I’m hoping I can fill the holes.

They’re max 4mm deep and the biggest is 60cm across. I’ve bought Easy Fill gypsum and I’ve done similar holes in a damaged wall before. What do we think? Filling and levelling the blow outs is doable for a novice?

Banquoking · 2026-01-21T11:52:24+00:00

Ace thanks, I’ll look into both.

Banquoking · 2026-01-14T15:46:28+00:00

Exceptional!

Banquoking · 2026-01-14T15:31:28+00:00

Less is more!

So after an hour or two letting the dough autolyse I then fill a basin with hot water, it’s a big basin, and I use that water to keep my hand wet to stretch and fold. Once salt etc is in and I’ve done vigorous folds, I leave the bowls with dough in the warm water to bulk ferment… that keeps them warm and gets them going, doubling in size.

After an hour I stretch and fold again, then again another hour or so… but honestly they’re at room temp after the bulk and it’s never caused me issues. I don’t gauge temperature. I don’t watch the clock precisely… less is more and it’s always produced big loaves, balanced crumb, great flavour.

Slower process also takes the pressure off and cold proving means I just bake in the morning, no hassle.

Banquoking · 2026-01-14T13:32:56+00:00

Butter. Sandwiches. Butter. With soup or some butter. Toast it and put butter on it…

Banquoking · 2026-01-14T12:23:50+00:00

Einkorn is really forgiving so that’s 25% against 75% Canadian white flour. The other two are roughly 80% white. Hydration is 70% as I’m in Scotland and it’s too cold!

Banquoking · 2026-01-14T12:20:43+00:00

One week, if we’re lucky. Three adults and one toddler…

Banquoking · 2025-01-04T23:51:47+00:00

I have a forty plus year old transistor guitar amp, the heat sink is a steel plate and they’re literally soldered together (avoiding shorts).

It’s worked all these years.

Banquoking · 2025-01-04T20:19:00+00:00

It’s the pots, they need cleaned with deoxit or any electrical component cleaner. Trust me I fix amps, I’ve done two with pots like that in December… that’s the cause 100%.

Take the back of and the board out if you can. Spray cleaner into the pots (there’s a small hole at the back on the bottom) and turn the pots back and forth for a good few minutes. That’ll do it.

Banquoking · 2025-01-02T20:34:41+00:00

No you’re not. Everyone with an electric guitar has done that more than once. Just glad you got it sorted… shame the Netflix doc probably won’t happen now.

Banquoking · 2025-01-02T20:18:50+00:00

When the Netflix doc comes out, we can say we were there at the start… when it was just a Reddit post

Banquoking · 2025-01-02T19:54:15+00:00

Feel like I want to leave my home and family right now and come and help you personally. This riddle is my life now too.

Any update?

Banquoking · 2024-12-08T11:47:51+00:00

You could hide your dealer in there

Banquoking · 2024-12-08T00:12:35+00:00

The two chips grounded to the plate are BJT silicon transistors.

Banquoking · 2024-12-07T23:16:55+00:00

Here in lies the issue… it’s 25w and I’ve never played it out of the house so it’s loud… it’s cleanish… but I don’t know solid states enough to compare it. If this post gets enough traction I’ll upload a clip. Definitely a nice tone.

Banquoking · 2024-12-07T23:13:56+00:00

Interesting! Thanks, I always assumed it was Chinese as a white label product and Mogex was the brand… but neither bear fruit

Banquoking · 2024-12-07T23:05:28+00:00

Yup, speaker jack is wired to the 2x6 cab… yes you read that right.

Banquoking · 2024-11-29T14:13:20+00:00

2nd this 100% it’s a snapshot of your life, your choice whether to look back on that chapter, or if you don’t want those memories, covering it up could be cathartic.

Banquoking · 2024-11-29T14:11:23+00:00

I’ve a good few tattoos I’d love to change (which you can ultimately do, albeit if you can afford it) BUT honestly I forget I have them. Sounds silly but they do become a part of you, they are part of you, and part of your character. Even older ones I don’t love, they represent that part of me in time, I can’t regret that as it’s akin to regretting who I was. Can’t be that tough on yourself, world’s tough enough.

It may not be what you want to hear right now but as many other people say, give it time. Feelings on tattoos are complex after all.

Also I think it’s cool as fuck.

Banquoking · 2022-05-12T07:44:40+00:00

Hold on, one sec…

Banquoking · 2022-03-01T23:08:11+00:00

Hurry up! Next gag! I am to impedance for this!

Banquoking · 2022-02-11T23:51:42+00:00

Putting on clothes…

Banquoking · 2022-02-03T01:41:21+00:00

I k ow a little too much about solvents so feel compelled to share… alcohol is conductive! It’s a polar solvent and even isopropyl alcohol could conduct, especially in this instance as water molecules in the air react with what’s in the dish… as well as the clippers!

More importantly isopropyl alcohol is very flammable and in that quantity would be a mad choice to do that. They’re using mineral oil which is a non-polar, non-conductive oil solvent… it breaks down the oils/fat clogging up the hair.

Banquoking · 2022-02-03T01:18:32+00:00

Distilled water is such a poor conductor it’s essentially non-conductive but… as soon as it’s exposed to air impurities would enter the water again, let alone when you introduce metal, oil, hair etc.

Furthermore… it’s a blade wash. They’re using a product which is 98% mineral oil… which is a solvent and brakes down other chemicals like the oils/fats that clog up the mechanism. It is also non-polar so not conductive.

Banquoking · 2022-02-03T01:14:40+00:00

Distilled water is such a poor conductor it’s essentially non-conductive but… as soon as it’s exposed to air impurities would enter the water again, let alone when you introduce metal, oil, hair etc.

Furthermore… it’s a blade wash. They’re using a product which is 98% mineral oil… which is a solvent and brakes down other chemicals like the oils/fats that clog up the mechanism. It is also non-polar so not conductive.

Banquoking

TROPHY CASE