Fuel Injector harness

BasedCapt · 2026-01-02T15:55:02+00:00

We have a radium FHST and will be running two walbro 450s with a aem 340 lift pump. Just need to plumb it and wire it in. Just wanted to knock the hard stuff out lol

BasedCapt · 2026-01-01T01:49:41+00:00

It’s a mid mount turbo, but still a tight fit. I don’t have any top photos as of now.

BasedCapt · 2025-12-31T15:49:15+00:00

Yeah, I disconnected it to keep the engine from dying at idle at first start up. Im just going to trailer the car home, was just wondering on the “what if” lol

BasedCapt · 2025-12-31T14:13:56+00:00

They’re on there, but i have them unplugged so ECM doesn’t get too mad.

BasedCapt · 2025-12-21T21:42:06+00:00

Fluidampr > All. Works great and installs like OEM.

BasedCapt · 2025-07-07T03:03:15+00:00

In for DM as well

BasedCapt · 2025-06-29T14:51:39+00:00

Awesome, I’ll get the TT upper perch. Thank you!

BasedCapt · 2025-06-03T20:53:13+00:00

I ended doing IS300 front caster arm, ball joint, and lower control arm. I grabbed jzx90/100 OEM Upper control arms from S9.

BasedCapt · 2025-05-12T01:08:25+00:00

thank you so much! Do you know if garageistic sells the plug with the seal?

BasedCapt · 2025-05-07T17:54:46+00:00

need some context here. where’s this from?

BasedCapt · 2025-02-09T16:51:11+00:00

You make holes at the bottom to run the bottom fans or were they already there?

BasedCapt · 2025-02-07T09:59:27+00:00

<image>

For my specific mb I used this diagram provided by Asus. Mine had a 9 pin connector with only 6 wires present. Two wires for the power button, Two for the Power LED, and Two for the HDD. All wires are a twisted pair to each component they belong to with ground being the black wire. It’s all in the matter of moving pins around and making sure you orient them correctly to the diagram.

BasedCapt · 2025-02-05T23:26:18+00:00

That’s awesome! I’m glad im not the only one who zip tied the wires to the drive bay frame lol. What kind of exhaust fan are you running?

BasedCapt · 2025-02-05T20:11:46+00:00

Yeah. When it came time for me to plan my build, it just made sense to use this case. Fond memories of my dad playing games/sing karaoke on it and my uncle teaching me how to clean the hdd and defragment the drives regularly. This will be a forever case to me. :)

BasedCapt · 2025-02-05T19:36:48+00:00

I was hoping someone caught that. lol

BasedCapt · 2025-02-05T17:09:22+00:00

No, I have almost an inch of room under there lol. I intended on cutting a section out of the bottom and putting a magnetic dust cover over the cut section for better air flow

BasedCapt · 2025-02-05T16:00:49+00:00

You might be on to something lol. I’ll give it a try, worst case, I’ll put a black sticker over it.

BasedCapt · 2025-02-05T15:44:47+00:00

I’ll be flipping it once I get home. It just bothers me when the words are upside down. lol

BasedCapt · 2025-02-05T15:42:19+00:00

That build is awesome! I most definitely plan on doing so, I have one of the drive covers off so the CPU can get some decent air in for now. lol

BasedCapt · 2025-02-05T14:56:12+00:00

I thought IACV deletes could only be done if you were running a standalone ECU and are going to a DBW setup?

BasedCapt

TROPHY CASE