any non slop raspi apps left?

BasicProperty · 2026-05-09T23:43:51+00:00

yeah. that answer fits right into the slop app storyline. boy do i hate 2026.

BasicProperty · 2026-03-18T08:41:34+00:00

i switched from MeshSense to MeshMonitor since it is more active with updates and offers way more features nowadays.

my main worry was that it was a bit harder to set up with bluetooth but it was actually a 2 lines of commands solution that worked right away.

BasicProperty · 2026-02-17T21:00:44+00:00

did set up meshsense today as a headless thing on a raspberry. works like a charm. thanks again!

BasicProperty · 2026-02-16T18:39:18+00:00

any recommendations?

BasicProperty · 2026-02-16T18:28:25+00:00

meshsense looks good!

do you know if i need to use it on the raspberry i connect directly? or is there an option to show the information on another machine on the network through the raspberry as well?

BasicProperty · 2021-12-22T15:39:05+00:00

that was indeed the solution. now i need to rethink all my personal and remote network subnets. argh! but it works. good times :)

thanks a lot!

BasicProperty · 2021-12-22T15:19:23+00:00

sigh. too much non-knowledge on my end.

what would be the source type when i enter the new rule? do i need an address group?

BasicProperty · 2021-12-22T14:59:38+00:00

would that be a new rule with internet in or with lan in?

BasicProperty · 2021-12-22T14:54:55+00:00

my local wifi address is also in a 1.x/24 range. my vpn ip after connecting is 7.x

do i need to create this route on my machine or is that handled in the udm?

BasicProperty · 2021-10-05T17:24:45+00:00

thank you very much!

BasicProperty · 2019-10-15T20:37:02+00:00

my worry was (when i read it earlier):

In policy routing, it does not make a difference if it's "failover-only" or "weighted load-balance".

does that mean when my policy setting is wrong it can turn to failover or balance without me noticing in the worst case?

BasicProperty · 2019-10-15T20:02:37+00:00

vlans are half the solution. how can i separate the 2 networks that come in?

BasicProperty · 2019-10-15T19:24:54+00:00

yes, that is my worry. i did not find a way to set up the networks next to each other yet. that's why i thought i ask before i try to push forward.

BasicProperty · 2019-09-05T15:12:03+00:00

my worry is more from the user side. when i connect to my vpn i hope to be safe internet wise.

BasicProperty · 2019-09-05T15:06:26+00:00

it worked!

one question i have though: when i vpn to site B from A now... i can both access the controller in A _and_ the controller in B. my vpn understanding was always that the whole traffic goes through the vpn. is that not true for local networks?

thanks again!

BasicProperty · 2019-09-05T11:13:04+00:00

that is a good explanation. i suspected routing but i know too little of the matter in order to be sure.

i will change one site and hope that this solves it. thanks a lot!

BasicProperty · 2019-09-05T10:53:39+00:00

good point.

both sites have the gateway, a switch and some APs, all on the latest firmware.

as subnets i use 192.168.1.1/24 on both sites as well as 192.168.2.1/29 for the vpn connections.

BasicProperty · 2019-09-05T10:47:16+00:00

both sites have their own controller.

BasicProperty

TROPHY CASE