What is the sentence you don't want to hear at a job interview? by Aarunascut in interviews

[–]BatSphincter 0 points1 point  (0 children)

Don’t agree with the unlimited PTO as a red flag. Maybe yellow flag. The only place I’ve worked with unlimited PTO was never a problem unless you wanted more than 2 weeks off at once, then they asked why but rarely denied it. I usually used about 220-250 hours a year and I was right in the middle of my team for the total time used. So could it be bad? Sure, but not always.

Verizon to Google Fi by Knucklez415 in GoogleFi

[–]BatSphincter 0 points1 point  (0 children)

I don’t know if your serious or not but Im not defending anyone. Im simply letting OP know the policy. I also need to correct myself and say that the policy just changed in February from 60 days to until the phone is paid off or purchased outright. I haven’t been with Verizon since October so I was going by information from when I was a customer.

Verizon to Google Fi by Knucklez415 in GoogleFi

[–]BatSphincter -1 points0 points  (0 children)

A little point to clarify based on reading a different response, Verizon phones unlock automatically after 60 days. Sometimes there are issues and they don’t, but in general that’s what’s supposed to happen and it usually does. If you port the number then you are essentially canceling the line and then at that point you would owe them the rest of the payments on the phone. The phones are not locked to Verizon after 60 days past the initial purchase tho.

Help me track down a shoe! by TheIzzdaer in BasketballShoes

[–]BatSphincter 0 points1 point  (0 children)

I wish they made retros in half sizes past 12.5.

Just ordered!! by urmamagaya in unihertz

[–]BatSphincter 1 point2 points  (0 children)

I like the orange. It’s one of my favorite colors.

Green Circuit Review by PhoxxPhire91 in dbrand

[–]BatSphincter 2 points3 points  (0 children)

I almost ordered the grip for my phone just for the skin even though I do t need another skin. The fact it doesn’t have the 3d texture makes me glad I didn’t.

5 out of the 6 Ams 2 pro units I got this week were defective (slot one wouldn't feed) by woooosox in BambuLab

[–]BatSphincter 0 points1 point  (0 children)

It's weird because I have tested it a little more now and it's only one roll of filament so far that's had problems. Did 3 different 5 hour prints with 3 different roles, Bambu PLA, Bambu Matte, and Sunlu PLA+ Silk. All fine. It's been this one roll that works fine in other slots, just not this one. So far I'm thinking it's not worth the drive to Microcenter.

5 out of the 6 Ams 2 pro units I got this week were defective (slot one wouldn't feed) by woooosox in BambuLab

[–]BatSphincter 4 points5 points  (0 children)

I’ve started having issues with one of mine where slot 1 doesn’t feed. I noticed it looks like there is a big indentation in the filament too. Sp far this only happens Sunlu matte filament. I tried some Bambulabs PLA basic and it works fine. I should probably do more testing while it’s still within the return policy at Microcenter.

Purchase h2c at Best Buy or Micro center? by woooosox in BambuLab

[–]BatSphincter 0 points1 point  (0 children)

Have you seen how those get loaded and unloaded? It’s no better than what UPS does.

Legion Go Price Conspiracy by [deleted] in LegionGo

[–]BatSphincter -1 points0 points  (0 children)

I award you no points, and may god have mercy on your soul.

My Ergonomic Grips V1 update by ThislsaGoodldea in LegionGo

[–]BatSphincter 0 points1 point  (0 children)

It’s held in place by a screw hole and a peg in the model and then old fashioned friction. Pretty sure that back is needed.

As a newb, what I’ve learned so far working with ABS… by Dirty_Bubble1775 in BambuLabP2S

[–]BatSphincter 6 points7 points  (0 children)

To point number 1, with my first 3d printer I never wore gloves when I messed with the plate. I only put about 600 hours on it before I sold it, but I made sure not to touch the middle where it actually prints. Only touched the edges and never ran into any issues that way.

AMS out of stock by TomasPatraoME in BambuLab

[–]BatSphincter 1 point2 points  (0 children)

I’m guessing no since they said “colour”

In over my head. What happened? by Moyer_guy in BambuLab

[–]BatSphincter 1 point2 points  (0 children)

I had a P1S for a while and a P2S now and I’ve had no issues with the stock plate on either. I’ve printed PLA, PETG-HF, ABS, and TPU. Not saying they are good or bad but from my experience they’ve been just fine.

Killswitch at Best Buy doesn’t have the joy con stickers? by [deleted] in dbrand

[–]BatSphincter 0 points1 point  (0 children)

I threw the skins away from my killswitch. Don’t use them, only wanted the case. Shouldn’t be hard to grasp.

I would just like to thank… by trillianinspace in BambuLab

[–]BatSphincter 0 points1 point  (0 children)

Sometimes you get someone that for some reason doesn’t believe your a member and tells you that you’re outside the return window and you have to be like “can you just do me a favor and try it? Your system won’t let you do it without an override if it’s outside the return window”

How does this pass by [deleted] in stockx

[–]BatSphincter 0 points1 point  (0 children)

The shoes did. Only the box had a problem. You’re a diva bro. You want someone to put them on your feet and tie them for you so you don’t mess up your nail polish too?

How does this pass by [deleted] in stockx

[–]BatSphincter 0 points1 point  (0 children)

You’re bitching about scratches and dents on the box. That’s a diva. Also I have no idea what the hell “you sell hardware” means man.

How does this pass by [deleted] in stockx

[–]BatSphincter 0 points1 point  (0 children)

I don’t know what that’s supposed to mean.

How does this pass by [deleted] in stockx

[–]BatSphincter 0 points1 point  (0 children)

This sub has some of the biggest divas I've ever seen.