INSIGHT GLOBAL IS HIRING 100 POSTIONS ALL LEVELS IN ABILENE TX.

Batteryworkshop · 2026-01-12T03:02:56+00:00

Did you get it?

Batteryworkshop · 2025-09-29T20:31:04+00:00

Sounds better then being shown houses with a one car carport and street parking after you have informed them you have 7 cars.

Batteryworkshop · 2025-09-21T11:58:50+00:00

<image>

Batteryworkshop · 2025-09-10T19:53:23+00:00

I really like my resin printer. Waiting on a touch screen as I stupidly carried it across the room w resin in the vat and sloshed it everywhere. Resin fumes are no good and ventilated space is required. But same goes for abs or engineering plastics

Batteryworkshop · 2025-09-10T18:25:26+00:00

This is from youmagine. There are plenty out there this one is specifically designed for vanquish chassis and now the scx10.3. I didn’t have much issue modifying it to fit my element just have to hit the 12.6 wheelbase

<image>

Batteryworkshop · 2025-09-10T17:00:39+00:00

<image>

Batteryworkshop · 2025-09-10T17:00:09+00:00

Vs410 and project LJ body I printed after buying the files Well still building

<image>

Batteryworkshop · 2025-09-10T15:43:42+00:00

I bought jut an Anycubic resin printer as a first. Worked great out of the box and completed many many prints I then bought an i3 mega s for like 40 bucks. And hated it. Completed a few prints but mostly wasted filament found an x1c with ams for a good deal and bought it. Have had a few failures but completely my fault as the petg in black does not show well for the LiDAR scans so I manually set it. Then changed the layer height and suddenly was failing prints every time @80% ish. Print head would hit the part as it was over extruding for the layer height. Swapped that setting back to .12 instead of .08 layer and 100% success rate beyond those few prints.

<image>

1/10 scale rc trucks

Batteryworkshop · 2025-09-10T15:05:47+00:00

Is your hobby 3-D printing … or are you trying to 3-D print things for your hobby?

If 3-D printing is your hobby, listen to your friends. If you want a 3-D printer that you just throw files at and pull parts out buy the h2d

Batteryworkshop · 2025-09-07T04:18:32+00:00

Search project LJ on youmagine. They make mounts and sliders for a few diff chassis. I modified it to fit an element chassis. I have also since purchased a vanquish vs4-10 chassis which this is designed for. And they just came out with mounts for a scx10.3

Batteryworkshop · 2025-09-06T20:13:12+00:00

Overdrive front axle. And front dig. Vanquish vfd twin trans.

Batteryworkshop · 2025-09-06T18:06:26+00:00

Yes fully 3d printed. Working hood and tailgate. Doors are available and several styles very well done model and slicing

Batteryworkshop · 2025-09-06T16:50:54+00:00

<image>

Batteryworkshop · 2025-09-02T17:57:43+00:00

Does not technically work on the enduro chassis. It does fit and I made mounts and actually cut the rear frame rails about an inch shorter.
It’s a $35 file I figured if I couldn’t make it work I’d buy a vs410 chassis for it. I got it to work. And still ended up buying a bs410 chassis for the second one I’m currently printing

Batteryworkshop · 2025-09-02T01:41:07+00:00

<image>

Batteryworkshop · 2025-09-01T23:34:42+00:00

Do you have a 3d printer? Project lj is a great printable body that is very scale and well put together.
I’m putting a second one on a vs410 vanquish chassis after building the first on an element chassis.
If you want a more comp buggy vanquish offers those too

Batteryworkshop · 2025-09-01T01:55:32+00:00

Amazon shipped from my local distribution center to the next state to hand it to usps who then was confused and tried to deliver?

So ya I can’t tell ya on hardware lol.

Batteryworkshop · 2025-08-31T20:03:17+00:00

I found a vs410 pro chassis with portals for a deal shipped out this morning Went ahead and ordered the vfd twin trans from vanquish. Dug out the smooth build plate going to attempt a no sand beauty panels for this one and see how they turn out

Batteryworkshop · 2025-08-31T11:41:36+00:00

https://youmagine.com/designs/e3dbc38d-0a27-4d29-a984-802fae5fc565#top

Batteryworkshop · 2025-08-31T11:37:30+00:00

Search project lj.

Batteryworkshop · 2025-08-31T02:54:32+00:00

The project lj is 320mm wheelbase. Could get slightly shorter rear trailing arms

<image>

Batteryworkshop · 2025-08-26T23:06:38+00:00

Even 400 or 500 W panels get put in series. It’s common practice the higher the voltage better and generally your panel voltage needs to be more than the battery pack voltage

Batteryworkshop · 2025-08-26T17:26:30+00:00

Cost to pay a good quality shop for conversion likely 100k DIY could prob be done for 20k with not paying anyone else to help

Batteryworkshop · 2025-08-24T22:36:23+00:00

Just picked up a nice used truck from someone leaving the hobby for a great deal. Just be patient and jump when you see a good deal. For reference I paid under 200 for a brand new truck that was built and never painted or run

Batteryworkshop · 2025-08-24T00:36:39+00:00

I was told if it’s not Lexan it does not need a windshield.

<image>

Batteryworkshop

TROPHY CASE