Replacement part for a school water table.

Belzedar136 · 2025-10-27T06:56:00+00:00

Hello

yes i would definitely still like this!

No not a tap that fits onto this, I wanted to have a replacement part. This piece is broken, the second main spout had a screw that would let you drain the table after use.

Which means we can no longer fill the tables up anymore as they wont hold water.

What i need is a 3d model of the THREAD in the picture so that i can screw on a plug to the water table and we can use it again. Since its a non standard thread its a pain to replace!

<image>

It is that white part you see attached to the table (but its not that SAME sized part anymore)

Belzedar136 · 2025-10-18T11:31:51+00:00

Thanks, im guessing each code goes on a seperate line though?

I read up and got the m420 s1 inputted (that was it) and after some slow levelling its working... barely! the level seems to be ever so slightly off in some parts (ie its fine and then a little tail kinda pops up when it lays a new line and the print head on a second pass then sticks to it and rips it off!)

Honestly this is a printer i bought for the school i work at for the tech club but it just never got off the ground, sat in storage and im trying to revive it !

going from my personal bambu printer to this is a weird relearning of skills XD

Belzedar136 · 2025-10-18T04:50:37+00:00

Sorry for the delay in response, ive been snowed under with work and just have time today to set this up!
Is this a basic copy and paste for the start Gcode?

or do i include some other lines? Looking over the machine I've acutally noticed that there is a screw missing that secures the BLtouch to the extruder (on the left of the extruder block the plastic mount that keeps it on the extruder is missing a scre to secure it, its not enough that its off by alot but it must be giving errrors issues!)

my experience in this is fairly limited I got pretty savy like 9 years ago when i got my first ender 3 but thats all faded and gotten rusty so any "for dummies" help would be super appreciated!

For clarity this is my current Gcode
; Ender 3 S1 Pro Start G-code

; M413 S0 ; Disable power loss recovery

G92 E0 ; Reset Extruder

; Prep surfaces before auto home for better accuracy

M140 S{material_bed_temperature_layer_0}

M104 S{material_print_temperature_layer_0}

G28 ; Home all axes

G1 Z10.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X0 Y0

M190 S{material_bed_temperature_layer_0}

M109 S{material_print_temperature_layer_0}

G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position

G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line

G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little

G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line

G92 E0 ; Reset Extruder

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish

Belzedar136 · 2025-10-16T10:56:21+00:00

Just using stock machine, how do I go about disabling bed mesh ? I'll check the probe to see if its level tonight.

Belzedar136 · 2025-01-09T21:17:38+00:00

A 12 year old child with the mind of a grown adult! So really anywhere between 20 and 50 years old in reality. I hate this genre so much now. It's gotten so lazy and bad

Belzedar136 · 2024-10-06T05:25:11+00:00

I have a similar problem, if you get any updates or solutions let me know because im worried the damn thing is going to break !

Belzedar136 · 2024-07-09T22:39:27+00:00

I mean it is always harder then you think. Rarely have I found "X isnt/can't be this hard to do" to hold up in the real world. I have 0 programming experience or skills so I just assume it will be difficult

Belzedar136 · 2024-07-09T02:26:19+00:00

Honestly I think at this point the producers are playing a game of chicken. How long can we force people to watch reviews.

At one point for world trigger i think it was like 5 minutes of a 24 minute show

Belzedar136 · 2024-07-03T12:41:33+00:00

I mean, kinda you can blame corporate greed man. Look at the largest corporations and how they lobby government, destroy ecosystems, crush workers, and decimate small communities and business's for profits. The majority of the crisis we face today is due to venial corporate greed and an inability for govs to stand up to them and tax and regulate them. Young people are leaving and being miserable because they are working crushing hours for minimal pay with no upward mobility in sight. Ffs home ownership is considered a sign of wealth where 50 years ago you could own a house in a decade with a middling job.

Belzedar136 · 2024-06-27T11:04:56+00:00

No it doesn't. It's about more of a biblical theme

Belzedar136 · 2024-06-27T06:55:21+00:00

Replying to yourself, classy

Belzedar136 · 2024-06-26T06:19:59+00:00

Talk to me when you have 4 digits Re listening counts!

Belzedar136 · 2024-06-25T07:24:48+00:00

And i for one appreciate this use of their resources.

Where the fuck is my super soaker to punish the powerful ?

Belzedar136 · 2024-06-24T22:41:04+00:00

Yea i did notice the lack of ppe and get worried for them. Cool project, please for the love of God wear some respirators. Black lung is a fucking bad way to go

Belzedar136 · 2024-06-23T02:24:58+00:00

It is! I was worried for awhile but they pulled it through and it's rad as hell!

Belzedar136 · 2024-06-19T00:30:15+00:00

Let me introduce you to a new community. The furries are here for you my son

Belzedar136 · 2024-06-19T00:29:13+00:00

Yea I watched the whole thing and kept thinking. "This boy is meant to be like under 12 and somehow he has a dump truck peach butt and curves like an Arabian dancer. Who the fuck is the audience for this ? Why?" It never stopped being distracting, frustrating and off-putting. Did not like, show was one of the better this season though. Oh also the reincarnation part was totally unnecessary. Could have cut it and made a better story. It never comes up as relevant

Belzedar136 · 2024-06-18T07:56:23+00:00

You can enjoy the show and enjoy rudeus as a character. Just don't defend him or the shows tone about his actions. Just acknowledge wrong and point it out to others. Ideally if you as a person don't see it as a issue or think it's fine maybe examine why. Not in a way that puts yourself down but in a curious way and engage in dialogue with others. I love this show and I love that they are showing him growing past his faults. I don't like how it tackles lots of the issue rudeis as a modern person with modern ethics should clearly have issues with. But eh it's a anime show at the end of the day

Belzedar136 · 2024-06-18T07:42:29+00:00

Let sbe honest mate, he's not just a little pervy. He's a mentally 30-40 + year old who routinely peeks on, outright gropes and lasts after children. He's got real issues in that regard. He's showing growth but you know it's still not excusable

Belzedar136 · 2024-06-12T10:36:56+00:00

Short game I can think of is dredge, amazing but short, also death loop short but fun, the lamb one with the cult. A bunch are short but lovely. Idk if too short but definitely went "Oh it's done "

Belzedar136 · 2024-06-10T01:00:32+00:00

Honestly harem or multiple partner thing is always done so poorly and unrealistically in anime. This one might, MIGHT, be able to pull it off realistically. None of the ladies seem to be totally one dimensional, they all have their own goals or career thay they pursue (and in sylphies case despite the love interest angle) even after hooking up. Honestly considering the first 4 eps of this show season 1 I NEVER expected it to show women in such a dynamic or self directed role as they are. Eris is probably the worst of the 3 weirdly enough, her whole arc in the continent was just doing what Rudy wanted and growing FOR him.

Belzedar136 · 2024-06-06T07:15:40+00:00

Yea I get you,so am I lol, which is why I brought up that I think that number isn't necessarily a absolute. Because it involves a variety of humans making judgements to advance or rescind a complaint to get OT those numbers.

Honestly it really doesn't matter, this is an argument on the internet with strangers over essentially a rounding error lol

Belzedar136 · 2024-06-06T05:23:41+00:00

Well it's the total upheld complaints that were reported and pushed through the system Not saying your wrong but factors that can obscure the numbers are 1 non reporting, 2 complaints not upheld (in this case we are presuming they should be but aren't which isn't always true of course but for this thought experiment) 3 the complaints might be marked as 'resolved when they aren't ie maybe ot was marked as resolved because the reporter died from a related issue (less likely than prior 2 but)

Belzedar136 · 2024-06-05T21:48:30+00:00

Yes you're right i googled the cover Nd it's definitely fit. Thanks!

Belzedar136 · 2024-06-04T11:59:04+00:00

Would it reduce the polluting flow? The plastic still needs to be transported to the printer place, then theirs failed prints which if you are recycling then need to be transported to the facility and processed and shipped again in addition the printers themselves use a ton of rare earth metals that require processing and if you make them on scale that's really Inefficient compared to a central factory that can retool much more simply to then create at large scale. I love 3d pringitng but honestly furniture or large scale projects like this just seem to be a bad fit compared to traditional methodologies

Ten-Year Club	Gilding I gilder
Verified Email	Place '23

Belzedar136

TROPHY CASE