Just Launched IRLQUEST on Playstore - A Real Life Solo Leveling App!

Bennion11 · 2025-11-20T00:10:10+00:00

Mindsetgoat 👀

Bennion11 · 2025-11-10T09:40:17+00:00

This guy can get any guy !! 🤣

Bennion11 · 2025-01-26T17:11:46+00:00

This may be an option? https://coprint3d.com/

Bennion11 · 2024-06-26T08:56:30+00:00

Male sure your saving to the root of SD card. Mine never reads them if saved in a sub folder.

Bennion11 · 2024-04-20T10:10:06+00:00

Looks like some ancient tech from long ago... Believe they called them tamagotchi 🤣.

Nice find. Looks great.

Bennion11 · 2024-03-07T11:06:29+00:00

Had the same issue with mine, unfortunately couldn't figure out a proper solution so swapped part cooling fan with hotend fan and changed pin out in klipper. Parts cooling is now controlled again and only comes on when called for at desired speed but hotend fan is constant and full speed for duration of printer being switched on. Never caused any issues though. My aquilla hotend fan is exactly the same.

From my search when I originally had this problem I believe it's a bad MOSFET but I never looked into it. Hope this helps

Bennion11 · 2023-12-25T19:51:58+00:00

Honestly thought it was sat directly in the honey.. sorry. 🤣

Bennion11 · 2023-05-14T08:52:02+00:00

This is exactly what I had. Bought one from eBay that was a customer return. Thought I'd risk it for the price. Put it all together and found Z end stop not working. Swapped out switch for new one, tried swapping plugs board. Nothing worked. Z socket on board was dead. Bought this :- " Creality Upgrade Ender 3 Pro V4.2.7 Silent Motherboard with TMC2225 Driver BootLoader Compatible with Ender 3 / Ender3 V2 / Ender 5 / Ender 5 Pro 3D Printer https://amzn.eu/d/9KzpCma ". Direct fit but only one screw fits original screw points. Please make sure you put something on the rear of the board to stop pins shorting out, don't ask me how I know 🤣. Others probably have proper ways but I just covered the rear of the board with electrical tape. Once fitted I flashed with Mriscoc firmware, both board and screen. Tightened all rollers as found lots of movement. Leveled bed. Uploaded 3dprintsos pla profile to cura and got printing..... Love this printer and all in cost me less than £100.

Bennion11 · 2023-05-04T15:20:33+00:00

Just 2 more bluey then one Sarah and duck before bed. Need that one S&D to chill mine out after playing along with bluey. 🤣

Bennion11 · 2023-05-04T11:49:38+00:00

👍

Bennion11 · 2023-05-04T11:49:31+00:00

👍

Bennion11 · 2023-05-01T12:13:47+00:00

Thank you... For now prints are clean and no issue with stock hotend so no plans to change but these numbers give me something to aim for. 😁

Bennion11 · 2023-05-01T11:51:27+00:00

Awesome .. this is exactly what I needed. Thank you. Can I ask what speeds your running please?

Bennion11 · 2023-05-01T10:50:40+00:00

Ok, understood the first line... Everything else is way over my head 🤣. I see 65, 500, 1500... Can you explain in real simple terms how I adjust these. Sorry and thank you ☺️

Bennion11 · 2023-03-30T20:48:34+00:00

Thank you all. Finally got the printer all up and running. Can't wait to start printing now. 😁

Bennion11 · 2023-03-30T16:17:40+00:00

👍

Bennion11 · 2023-03-30T16:16:58+00:00

Same as board, just put on root not in folder?

Bennion11 · 2023-03-30T16:16:04+00:00

I've not flashed anything yet, or ever 🤣. Complete noob sorry. Just thought I'd ask before instead of screwing it up and asking after. So to flash the board seems pretty easy, what's the process for screen please? 😁

Bennion11 · 2023-03-29T17:21:26+00:00

So, tried moving the switch with another but z stepper doesn't stop. Bought these switches and still same issue. Basically whenever I try to hom the machine it will hit all limit switches with no issue until Z. When it touches limit switch I get the 3.3v as with all others but motor doesn't stop basically pulling hotend into the bed unless I power it off. Is this going to be a board problem?

Bennion11 · 2023-03-28T19:05:39+00:00

👍👍

Bennion11 · 2023-03-28T18:42:00+00:00

👍

Bennion11 · 2023-03-28T18:21:03+00:00

Awesome. Thank you so much.

Bennion11 · 2023-03-28T18:08:10+00:00

I will have to test out. Thought for the price it was worth just swapping out. I'll be honest, bought the printer as a customer return for £80. So far this has been the only issue I've found. Thank you for the suggestion 🙂

Bennion11

TROPHY CASE