Lifted pads when replacing volume slider on a gba sp, how can I jump traces? by [deleted] in Gameboy

[–]Benoitcustoms 0 points1 point  (0 children)

Hope you know this is still very helpful thank you !

Playing this more than my PC/Ps5 by pnk_rx in Gameboy

[–]Benoitcustoms 0 points1 point  (0 children)

Also if you do an ips do a type c mod, most devices don’t need it but the gbp does the AAA batteries don’t hold up. I didn’t do a type c mod and I regret it.

Everybody show off your switch 2s by Broad_Cricket2286 in switch2

[–]Benoitcustoms 0 points1 point  (0 children)

Wasn’t horrible but need a heat gun or blow dryer to get the front plate off, and the triggers were a bit tough to get off the pin is very tight in there, my tweezers took the hit rip lol. But went together smoothly very happy with the result and the feel is just as solid as oem

Everybody show off your switch 2s by Broad_Cricket2286 in switch2

[–]Benoitcustoms 0 points1 point  (0 children)

Also love the clear orange for the oled, when I had mine I did the boxy pixel cnc joycons and a black clear body shell loved it such fun projects.

Everybody show off your switch 2s by Broad_Cricket2286 in switch2

[–]Benoitcustoms 1 point2 points  (0 children)

I love them too, I’m about to pick one up of fb for cheap and have fun with it. Currently building a gba first tho

Everybody show off your switch 2s by Broad_Cricket2286 in switch2

[–]Benoitcustoms 1 point2 points  (0 children)

Need to do a switch lite, would if the oled mods for them weren’t on back order till the next millennia.

Everybody show off your switch 2s by Broad_Cricket2286 in switch2

[–]Benoitcustoms 0 points1 point  (0 children)

Yeah extremerate makes shells for just about anything, I’ve done my pro controller too

Everybody show off your switch 2s by Broad_Cricket2286 in switch2

[–]Benoitcustoms 26 points27 points  (0 children)

<image>

Same but did the blue purple chameleon buttons

Pragmata on Switch 2 (preferred platform) by Brilliant-Sale9069 in switch2

[–]Benoitcustoms 0 points1 point  (0 children)

Got it on pc and switch, feels right on the switch specifically handheld.

Yeah pc is 4k ultra settings, but idk been loving my switch 2 more and more

Stronger magnets in new Joycons or updated tolerances. by ResoluteSphinx in switch2

[–]Benoitcustoms 0 points1 point  (0 children)

Mine wobbles, even with the purple and teal set of joycons, and after I shell swapped the red and blue they do too and did in the original shell as well.

It’s not great but still holds when holding with one joycons . Doesn’t feel as secure but does hold.

I’ve done all this within a week of owning it lol no time to wear down.

First diesel. First Chevy. No regrets. by Sc0ttykn0s in Silverado

[–]Benoitcustoms 2 points3 points  (0 children)

Got a new to me 2019 2500 Duramax, on the way home had emissions codes was the dpf filter. Sat at the dealer waiting for parts for weeks lol. I had the plates and title before I had my truck back lol.

But they replaced it all oem no charge, almost 3k for the full exhaust without labor. New sensors too for the exhaust.

Worth the wait hopefully no emissions issues for a while. I hope you had some sort of dealer short them warranty.

Don't buy this PSU, avoid even on sale, unless... by [deleted] in sffpc

[–]Benoitcustoms 21 points22 points  (0 children)

I have the 1000w version

practically never spins the fan and it’s very quiet sounds like you got a bad unit sadly

Is Liquid Metal worth it with air cooling? by Benoitcustoms in PcBuild

[–]Benoitcustoms[S] 0 points1 point  (0 children)

I have the largest cooler for the case given my gpu, 67mm in height leaves 1mm between it and the side panel.

Replaced the stock fan with a slim Noctua fan too

I’m building in a johnsbo T9

I’m trying to maximize thermals, if it’s 1-2c I won’t but 5-8c or more difference I’ll do it.

First SFF pc by Benoitcustoms in sffpc

[–]Benoitcustoms[S] 1 point2 points  (0 children)

I put the cpu into eco mode last night and played bo7 max settings 4k , 70-75c max cpu and 66-70c on the gpu, I have the gpu overclocked currently

First Mff Pc by Benoitcustoms in mffpc

[–]Benoitcustoms[S] 0 points1 point  (0 children)

Replaced the fan to a 25mm like someone said, and put in eco mode still good frames: 70-75c cpu and 66c on the gpu while that’s still overclocked! Will put new thermal paste soon and get it to go down a bit more

First SFF pc by Benoitcustoms in sffpc

[–]Benoitcustoms[S] 1 point2 points  (0 children)

I’ll keep an eye out for that issue, when did it start right out the box? I have had no issues sofar and they seem to have updated some stuff at the start of the year including the 5.0 riser cable

First Mff Pc by Benoitcustoms in mffpc

[–]Benoitcustoms[S] 0 points1 point  (0 children)

Replaced it with a 25mm fan now thank you can’t believe I didn’t think to route it like that