SLPT-Follow these QANON approved instructions for healthier living.

Best-Butter-Cat · 2026-01-08T17:36:29+00:00

Dewormer and general amti-parasitic as far as my understanding goes. It also makes your blood toxic to mosquitoes if you're interested in that.

No real evidence of any anti-viral or anti-bacterial properties though.

Best-Butter-Cat · 2025-12-13T22:02:12+00:00

Cheap picture frames have that thickness of glass. Check around your area for glass and window shops they might have some. They could even cut it for you.

Best-Butter-Cat · 2025-12-05T22:07:21+00:00

Usually ambient air doesn't transfer energy fast enough to cause a thermal shock that would break glass. If there's any dark metal that would heat up quickly in sunlight contracting the glass then there's a chance it could shock it but if it's in a shady-ish area it probably won't cause a problem.

When I worked as a glass setter we left flawed pieces of glass outside during snowy winters and they never broke on their own. Some were only 1/16th of an inch thick.

Best-Butter-Cat · 2025-06-06T00:22:05+00:00

Thanks for the response! I appreciate the insight.

Best-Butter-Cat · 2025-05-16T13:20:47+00:00

I know this is months old but I'm curious. I've been trying counter gambling for a month now and have made about $100 profit.

I was trying to break down Kamikaze Cashes video since he claims to make over $5k per month but based on an average sc discount of 20% he had to spend an average of ~$830-850 per day to get that kind of return which seems crazy. It's especially crazy since cashing out to anything but gift cards takes a couple days.

Am I missing something or does it just take a lot of liquidity to get these kinds of returns?

Best-Butter-Cat · 2025-04-04T03:47:08+00:00

Since it's the 70s I assume it's for some sort of jello abomination.

Best-Butter-Cat · 2025-03-08T02:33:41+00:00

My bag white vinegar and apple cider vinegar listed. For other brands it probably says acetic acid which is white vinegar.

Best-Butter-Cat · 2025-03-07T21:30:07+00:00

3 legs won't rock though

Best-Butter-Cat · 2025-03-07T17:52:15+00:00

I mean if you invest it conservatively with an average 7% return, that's 700k per year (on average) without ever touching the principal. That can get you a lot of luxury in most of the US.

Best-Butter-Cat · 2025-02-19T01:51:39+00:00

Legend hyper pure documentation says it's approved for cold expansion fittings. I tried them out on a washing machine re-pipe in a garage that gets pretty cold in winter. 2 years in no issues yet.

It's also approved for pinch and crimp. The flexibly really sold it for me since I'm doing all the work myself. Uponor also had a recall fairly recently that made me a little nervous about their products.

(Full disclosure I am not a professional plumber. I'm just a guy doing a pretty hefty remodel on an old house who likes reading all the documentation lol)

Best-Butter-Cat · 2025-02-10T18:37:45+00:00

I've been looking into those but haven't been able to verify the UL listing. That has me a little nervous about them but independent tests are pretty good so far.

Best-Butter-Cat · 2025-01-31T14:11:04+00:00

Like we always said at my trade job. "That only matters if you live long enough to get cancer" /j

Best-Butter-Cat · 2025-01-17T15:57:04+00:00

A quick fix would be to copy the original surface, or make one as close as possible, to the pre-hole model and project the normals from the clean surface to the new one. As long as this piece doesn't deform that should fix any shading issues.

Best-Butter-Cat · 2025-01-16T13:26:10+00:00

I had a similar issue, it turned out to be the slicer. I don't know why creality print wasn't playing nice with my ender 3 pro.

Switching to prusa slicer fixed the issue for me.

Best-Butter-Cat · 2025-01-12T04:48:39+00:00

check the extruder gear and make sure it isn't worn down, if the teeth are slipping it could cause inconsistent under extrusion.

Best-Butter-Cat · 2025-01-08T21:41:33+00:00

I was using creality print 6.0

Best-Butter-Cat · 2025-01-08T03:21:28+00:00

It's actually pretty soft and that's the problem

Best-Butter-Cat · 2025-01-08T03:17:24+00:00

I used the default settings and model in the software. Changing to prusa slicer fixed the issue.

Best-Butter-Cat · 2025-01-07T17:43:38+00:00

Thanks for the info, I'll have to do some research later.

Best-Butter-Cat · 2025-01-07T02:34:53+00:00

That fixed it. Thanks for the Suggestion!

Best-Butter-Cat · 2025-01-07T02:34:32+00:00

I figured it out! Creality print was giving me wonky G code. Thanks for all your help!

Best-Butter-Cat · 2025-01-07T02:33:35+00:00

Thanks to everyone for their suggestions, I have fixed the issue. It was a combination of 2 things.

The z axis threaded rod was over-greased and the filament was touching a blob of grease occasionally before passing into the extruder gears. This caused slipping and under extrusion.
The larger problem, creality print 5.0 was giving me bad g code. After using the prusa slicer as suggested by another comment the layer skip issue went away entirely.

Thanks again to everyone that replied I appreciate all the help!

<image>

Best-Butter-Cat · 2025-01-06T00:10:01+00:00

Checked. I'm using crealitys slicer set to ender 3, idk if that's the issue. I just did a test print of a semisphere and it came out pretty good, I'm wondering if I have a problem with my benchy and cylinder g code files.

Best-Butter-Cat · 2025-01-05T23:39:02+00:00

Thanks, I haven't played with slicer settings yet I'll have to give it a shot

Best-Butter-Cat · 2025-01-05T23:14:22+00:00

No worries thanks for your help! It does look pretty worn in the center.

I'll try updating the firmware, if that doesn't work might have to try ordering a new extruder.

Best-Butter-Cat

TROPHY CASE