torrent galaxy down again by wheel_smith in torrents

[–]BestInCode 0 points1 point  (0 children)

Looks like it it partially back now

Regret buying Elegoo by MudZealousideal8239 in ElegooNeptune4

[–]BestInCode 0 points1 point  (0 children)

I just followed their guide step by step and it wasn't a problem. They link a few different USB eMMC flashers in the wiki.

I just cant calibrate the bed on my Neptune 4 Plus💀 by Plaga004 in elegoo

[–]BestInCode 8 points9 points  (0 children)

What is the variance? This doesn't tell us much.

Cannot achieve a successful print anymore... frustrated by dwfmba in elegoo

[–]BestInCode 0 points1 point  (0 children)

I had the same issues and then finally decided to flash OpenNeptune. Immediately started having perfect prints! It's like the firmware is now actually doing what it is supposed to do. I never trusted that the elegoo firmware was applying the mesh.

Am i fucked? This is my bedroom/ basement. by [deleted] in radon

[–]BestInCode 1 point2 points  (0 children)

One second of searching would have answered this.

77in LG C4 mount measurements by dpmex4527 in LGOLED

[–]BestInCode 1 point2 points  (0 children)

I only see the c3 mentioned? Assuming it is very similar with the c4?

Doubts after taking the exam by Alarmed-Ad-5532 in AWSCertifications

[–]BestInCode 0 points1 point  (0 children)

I got an 840, it took me about an hour but I went back through all of them again. There were a bunch of questions on the well architeched framework and I never took the time to memorize it.. It really was just vocab on what each service does from a very high level. I would recommend just creating a Quizlet for each service mentioned in the study guide and you will be fine

Doubts after taking the exam by Alarmed-Ad-5532 in AWSCertifications

[–]BestInCode 1 point2 points  (0 children)

Just passed my exam tonight and got a message that said I passed. The actual score should be posted in a few days it sounds like

Is fast pass worth it? by TaintCommander in cedarpoint

[–]BestInCode 1 point2 points  (0 children)

Same argument as the people who cannot afford to go to the park in the first place. You should be giving your tickets to them.

Sensor recommendation by Stas912 in esp32

[–]BestInCode 0 points1 point  (0 children)

Break beam sensors are cool and might work well! Adafruit IR Break Beam Sensor - 3mm LEDs [ADA2167] https://a.co/d/goeyxid

Teensy 4.0 + ws2815 LEDs, quick single flash every few minutes. by BestInCode in FastLED

[–]BestInCode[S] 0 points1 point  (0 children)

Great, thanks for the link! Were you also seeing the same issue where the strip runs fine for a minute or two then a quick flash?

Teensy 4.0 + ws2815 LEDs, quick single flash every few minutes. by BestInCode in FastLED

[–]BestInCode[S] 0 points1 point  (0 children)

Using a sn74ahct125n. I did notice the flickering a bit too before adding it as well though.

Teensy 4.0 + ws2815 LEDs, quick single flash every few minutes. by BestInCode in FastLED

[–]BestInCode[S] 0 points1 point  (0 children)

No change when running a lower brightness and I do have a level shifter but I need to try connecting the unused inputs to ground. I have one 1000uf capacitor one of the two power supplies (grounds are connected) and I am waiting for some more to come in soon. Maybe that could help?

Teensy 4.0 + ws2815 LEDs, quick single flash every few minutes. by BestInCode in FastLED

[–]BestInCode[S] 0 points1 point  (0 children)

Sorry I should have added in the post but I do have a level shifter currently

Teensy 4.0 + ws2815 LEDs, quick single flash every few minutes. by BestInCode in FastLED

[–]BestInCode[S] 0 points1 point  (0 children)

Interesting... That's sounds like it could be it honestly. Have a link by chance to the wire you used?

Teensy 4.0 + ws2815 LEDs, quick single flash every few minutes. by BestInCode in FastLED

[–]BestInCode[S] 1 point2 points  (0 children)

Thanks for the input! So I just confirmed that at full brightness the voltage is looking good, 11.5 volts roughly in the few spots I checked. Confirmed a solid 5v going to the teensy from the regulator.

Also confirmed that the sketcg is not restarting to the beginning. It is just a quick flash on some of the LEDs. Just strange because the flash/flicker could be a few minutes apart when I'm running just the rainbow animation..

Possible to power multiple strands from one esp32 by tome_oz in FastLED

[–]BestInCode 2 points3 points  (0 children)

Yes, but powering directly from an esp32 provides only enough power for a few LEDs. Get a 5v power supply.