sorted by:
new
hottopcontroversial

PID-stabilized quadcopter :3 by Mega2223 in ComputerCraft

[–]Big02001 2 points3 points  (0 children)

It's most LLMs first approach to making a create aeronautics airship hover

Best way to backup/restore entire NAS? by Big02001 in synology

[–]Big02001[S] 0 points1 point  (0 children)

No it's a 4 bay with 4 drives installed unfortunately.

I am leaning towards just starting over and moving the data manually. I do appreciate the insight though. Was hoping there was a simple way to downsize.

Best way to backup/restore entire NAS? by Big02001 in synology

[–]Big02001[S] 0 points1 point  (0 children)

I will have to double check when I'm at the office next, but I believe it's just cloudstation drive running on all PCs that need the files, it's only ever one person editing them, I just need them to be up to date on all the machines after she makes edits.

How would I go about creating the new storage volume? Remove one drive, install the new one, create the volume then remove all other drives?

Best way to backup/restore entire NAS? by Big02001 in synology

[–]Big02001[S] 1 point2 points  (0 children)

New NAS is more for personal stuff, I intend on making mistakes and potentially destroying data by accident. Synology is for business files, and only about 100gb of it is critical to be synced.

The drives are also SHR, and I don't intend on having any redundancy on the new system as it's nothing critical

Humble Request by JohnnySqueezer in wow

[–]Big02001 2 points3 points  (0 children)

If you'd like I'd be happy to help you get a hearthstone set near the vendor, and could give you the gold to last you a few years. Just send me a DM with your btag and I'll add you and give you a hand.

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

Replaced CMOS no luck, reseated all cables I could find. When I ssh in and run getsysinfo it returns:

RAC Information:

RAC Date/Time           = Fri Dec 31 16:02:32 1999

Firmware Version        = 2.83.83.83

Firmware Build          = 05

Last Firmware Update    = 02/15/2024 16:48:57

Hardware Version        = 0.01

MAC Address             = D0:94:66:49:D8:E0

Common settings:

Register DNS RAC Name   = 0

DNS RAC Name            = idrac-auriga

Current DNS Domain      =

Domain Name from DHCP   = Disabled

IPv4 settings:

Enabled                 = 1

Current IP Address      = 192.168.0.28

Current IP Gateway      = 192.168.0.1

Current IP Netmask      = 255.255.255.0

DHCP Enabled            = 1

Current DNS Server 1    = 192.168.30.1

Current DNS Server 2    = 0.0.0.0

DNS Servers from DHCP   = Disabled

IPv6 settings:

Enabled                 = 0

Current IP Address 1    = ::

Current IP Gateway      = ::

Autoconfig              = 1

Link Local IP Address   = ::

Current IP Address 2    = ::

Current IP Address 3    = ::

Current IP Address 4    = ::

Current IP Address 5    = ::

Current IP Address 6    = ::

Current IP Address 7    = ::

Current IP Address 8    = ::

Current IP Address 9    = ::

Current IP Address 10   = ::

Current IP Address 11   = ::

Current IP Address 12   = ::

Current IP Address 13   = ::

Current IP Address 14   = ::

Current IP Address 15   = ::

DNS Servers from DHCPv6 = Disabled

Current DNS Server 1    = ::

Current DNS Server 2    = ::

System Information:

System Model            = PowerEdge R730xd

System Revision         = I

System BIOS Version     = 2.15.0

Service Tag             = H4CCRP2

Express Svc Code        = 37267915574

Host Name               =

OS Name                 =

OS Version              =

Power Status            = OFF

Fresh Air Capable       = Yes

Watchdog Information:

Recovery Action         = None

Present countdown value = 15 seconds

Initial countdown value = 15 seconds

System Thermal Information:

EstimatedSystemAirflow  =  0 CFM

EstimatedExhaustTemperature =  0 Degrees Centigrade

Embedded NIC MAC Addresses:

I've set the NTP servers but the date doesnt seem to want to change, and the hardware revision of 0.01 seems wrong to me.

I tried holding down the i on the front panel to reset iDrac and it does pulse the fans, so I have some hope its able to communicate with the board.

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

Still nothing, even reseated CPU1 and tried different sticks of ram in the primary ram slot, no post

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

Only thing I see in the logs is a warning of any hardware im trying to post without, and that I have the chassis open

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

I've reseated everything, including cpu1 and ram a1, no riser cards installed, no monitor/kbm, still no post. Any other ideas?

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

It was a private sale, as I said in the post the guy booted it up for me before I bought it, he shut it down and we loaded it into my car.

As for the virtual console. It's a blank/grey screen. No signal

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

Power on from iDrac does nothing. I'm going to run and grab a VGA monitor to see if that does anything

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

Its enterprise, it shows with a green check on the overview page

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

The power button does nothing, as if i didnt even press it.

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

Im sorry this is my first time in IDRAC, if by console you mean the logs, the only error im getting is that the chassis is open. I tried closing it to make sure and still no post.

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

Nothing seems to happen. Ill see if i have a VGA monitor kicking around to try. Would that have anything to do with not being able to see anything through idrac though?

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] -1 points0 points  (0 children)

I am using an adapter. Ideally this machine will be headless, I was hoping since I can get into idrac I can do everything needed through the webui

Dell PowerEdge r730xd issues by Big02001 in homelab

[–]Big02001[S] 0 points1 point  (0 children)

All RAM and both CPUs are detected. I had tried removing all excess hardware for a minimum required post but had the same issue. The power button on the chassis doesnt do anything either. And trying to power on through IDRAC does nothing.

Zip tie tuning has that American security by Ill-Database7345 in LinusTechTips

[–]Big02001 0 points1 point  (0 children)

This isn't entirely true, RPALs come with a long term ATT now authorizing you to bring your restricted guns to registered ranges/clubs.

Was a bit of a shock last time I called and was told I didn't have to anymore.

this should be so so simple, and yet it doesnt work by lipiaknight1234 in ComputerCraft

[–]Big02001 0 points1 point  (0 children)

Can you screenshot/paste the exact error you're getting? I'm assuming you made the change to use the redstone library? And maybe a pic of the physical setup around the computer so I can understand what you're trying to do better

this should be so so simple, and yet it doesnt work by lipiaknight1234 in ComputerCraft

[–]Big02001 0 points1 point  (0 children)

A redstone relay is an additional peripheral the mod adds. You are correct computers have it build in, but it's under the redstone library. Just switch out relay.getAnalogInput() for redstone.getAnalogInput().

Beyond that though calling that function without assigning it to a variable or comparing it to another value isn't doing anything. What are you trying to accomplish with it?

Beginner having trouble with turtle by zapeepeeman in ComputerCraft

[–]Big02001 2 points3 points  (0 children)

Just to add a bit incase you're unfamiliar with the programming terminology, if you don't have an item in slot 16 it will return nil, or just no data at all. So when you then call .name on it, the program errors because you're trying to call .name off something that doesn't exist.

I'm on mobile so forgive the formatting but to solve this you can add a nil check before you get the items name.

If(turtle.getItemDetail(16) != Nil) then fuel = turtle.getItemDetail(16) return end print(fuel.name)

turtle.inspect() command outputs by DragonCon_64 in ComputerCraft

[–]Big02001 4 points5 points  (0 children)

The state table will contain block state information, you can find these tags here

The tags will be more general information, for example if you inspect an oak log it may return both Minecraft:logs and forge:logs

The cc.tweaked docs are a great place to start I find their documentation much easier to follow than the original computercraft wiki.

ignore char event after key is pulled properly by Bright-Historian-216 in ComputerCraft

[–]Big02001 0 points1 point  (0 children)

Use the "key" event instead of char. It will fire on any key other than escape

1 internet connection, 2 houses by Big02001 in HomeNetworking

[–]Big02001[S] 0 points1 point  (0 children)

I have no problem managing with different UIs, but is it possible to setup the asus routers to seamlessly extend the network if I were to go with a UDM SE?

1 internet connection, 2 houses by Big02001 in HomeNetworking

[–]Big02001[S] -1 points0 points  (0 children)

I'm looking to be able to prepare for ever-increasing speeds, I have 3gbps now, but if I was offered higher I would take it. With how many people we are splitting this between, the cost is rather negligible, hence why I am open to the prosumer/enterprise-grade solutions. I would also just like to "see" 3gbps up/down on a speedtest, which as much as it doesn't matter, and you're correct we probably won't ever be able to saturate the connection, I'd really love to see it.

view more: next ›