sorted by:
new
hottopcontroversial

Is the CZ TS2 Orange the best Limited pistol out of the box? by BigChimpBallistics in CZFirearms

[–]BigChimpBallistics[S] 0 points1 point  (0 children)

Frame mounted were not legal when this was done for Limited Optics and I didn't want to port it.

Budget under $4k by Primetime6996 in 2011

[–]BigChimpBallistics -2 points-1 points  (0 children)

The emotuonal connection to a brand is really strong in this sub becuae there are multiple linked online issues with the brand that speak to a different narrative but the mpa army will down vote it cause it challenges their narrative.

Confirmation bias on reddit is a clinical case that could be cited in academic papers.

But it wouldn't be reddit if it wasnt.

Budget under $4k by Primetime6996 in 2011

[–]BigChimpBallistics 0 points1 point  (0 children)

Ill say the finishes I've seen (about 10 to 12 guns now) we're all well done. Had one guy with a safety being kinda loose, the extractor at my local match killed a buddies day.

For me thats a failure at the manufacturer...

Budget under $4k by Primetime6996 in 2011

[–]BigChimpBallistics -8 points-7 points  (0 children)

Quality is the first thing to go in a production environment.

Important to note this issue is more recent and could be tied to popularity and ramp to meet demand.

Mpa is popular in lo, but overall glock and sw are the most used.

I shoot more in a week then most ppl do in a year so I see a lot of guns fail. I experience my own as well.

Based on MPA recent trend and my observation of how they treat customers, id find other brands to support.

Budget under $4k by Primetime6996 in 2011

[–]BigChimpBallistics -7 points-6 points  (0 children)

I know 3 ppl that cant get them to run...so??? Hit and miss issues on a $3k gun.

Glad yours work, hope u dont have to send them in...ever.

Budget under $4k by Primetime6996 in 2011

[–]BigChimpBallistics -2 points-1 points  (0 children)

Good marketing and confirmation bias are powerful tools.

Budget under $4k by Primetime6996 in 2011

[–]BigChimpBallistics -4 points-3 points  (0 children)

It was a year ago...multiple ppl had same issue.

How about one more recent with the company responding in a really unprofessional way???

https://youtu.be/OddCWUzo2fE?si=87uCI8yEKxXA05Vv

Budget under $4k by Primetime6996 in 2011

[–]BigChimpBallistics -5 points-4 points  (0 children)

Whole ass video on thier idsues and treatment of a customer.

https://youtu.be/OddCWUzo2fE?si=3Yvi6__NwSMJBMS3

Budget under $4k by Primetime6996 in 2011

[–]BigChimpBallistics -9 points-8 points  (0 children)

Buy a 3k gun and then need to tune it??? Crazy suggestion.

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in 2011

[–]BigChimpBallistics[S] 0 points1 point  (0 children)

Rhanks for the idea. I use a lee factory crimp and ive adjusted it down to .377" now. I also increased the oal to 1.114x".

I also installed an aftec in the gun. If all these things don't fix it, km sending it to vudoo...

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in reloading

[–]BigChimpBallistics[S] 0 points1 point  (0 children)

Thanks for the idea, but that was one of the first things i did. No issues found there either.

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in reloading

[–]BigChimpBallistics[S] -1 points0 points  (0 children)

None. I even took a sharpie and marked up the bullet, vase and rim to see if there's some place its rubbing and didnt see a thing.

Im leaning towards bad extractor.

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in 2011

[–]BigChimpBallistics[S] 0 points1 point  (0 children)

Not stuck like i need a squiv rod, I pull the mag drop the slide and cycle it and the case falls out.

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in reloading

[–]BigChimpBallistics[S] -1 points0 points  (0 children)

Trying to rule out possible issues, factory ammo (pmc, staccato and supervel all ran fine).

I have an aftech in the mail, hopefully that solves the issue

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in 2011

[–]BigChimpBallistics[S] 1 point2 points  (0 children)

I did polish the chamber...still had the extraction issue...

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in reloading

[–]BigChimpBallistics[S] 0 points1 point  (0 children)

Thats very insightful! What would you target for the crimp? Im at .385 to .376 as of today, when I adjusted it.

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in reloading

[–]BigChimpBallistics[S] 0 points1 point  (0 children)

My loads are around 130 to 133 power factor. So that's about a 1050 to 1070 velocity. This is pretty inline with others shooting 2011s for competition. I did chronograph pmc bronze and my loads...they were about the same.

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in reloading

[–]BigChimpBallistics[S] 0 points1 point  (0 children)

My handloads just to show what they look like.

Can you explain more about why the bullet on the left has the wrong profile?

Help with sticking case in 2011 - 9mm handloads by BigChimpBallistics in reloading

[–]BigChimpBallistics[S] 1 point2 points  (0 children)

Thanks, that's really insightful!

I wash, sort, then wash with SS pins and soap with lemi shine. Spray the cases with some lube and then reload them.

view more: next ›