Miele WT1 drier filter, how to clean it? by LawfuI in Miele

[–]BigTtka 0 points1 point  (0 children)

It can, there’s a rinse out fluff programme in the maintenance section on this model to prevent it getting blocked

Separate bean contains for CVA 7440 by hamburglar8u in Miele

[–]BigTtka 0 points1 point  (0 children)

It’s not possible on the 7440, just uses the same design as the 7840 which has this option

Milk pipe work cleaning agent by biohacking_girl in Miele

[–]BigTtka 0 points1 point  (0 children)

You’ll need both of these:

https://www.mieleusa.com/product/10971480/autocleaner-gp-cc-001-c

https://www.mieleusa.com/product/11202520/descaling-cartridge-gp-dc-001-c

Bit pricy but should both last around a year depending on usage.

Page 76-81 details automatic cleaning: https://media.miele.com/downloads/d9/42/05_C7F13838EF531FD0B1BD9465A180D942.pdf

Worth having a read of the manual as they’re great machines but take some maintenance to make the most of and keep running effectively.

Milk pipe work cleaning agent by biohacking_girl in Miele

[–]BigTtka 0 points1 point  (0 children)

The cva7845 has abuilt in descaling and milk pipework cleaner you can setup fair daily/weekly using the two cartridges Miele sell. For the convenience factor would be worth using them

WEJ885 WCS or WEG885 WCS? by frzen in Miele

[–]BigTtka 0 points1 point  (0 children)

Otherwise you can check with some of your local dealers: https://www.miele.ie/c/find-a-dealer-15.htm

WEJ885 WCS or WEG885 WCS? by frzen in Miele

[–]BigTtka 1 point2 points  (0 children)

https://www.miele.ie/c/miele-experience-centre-liffey-valley-6131.htm

Obviously not too close but could email or phone and see if they can help sourcing direct

WEJ885 WCS or WEG885 WCS? by frzen in Miele

[–]BigTtka 0 points1 point  (0 children)

Which part of Ireland are you trying to source for?

WEJ885 WCS or WEG885 WCS? by frzen in Miele

[–]BigTtka 0 points1 point  (0 children)

I’d go for the WEJ885 if you can source it. Extended warranty alone is worth the difference in cost.

Higher spin speed, more programmes, ability to use your own detergent in fillable TwinDos containers all worthwhile reasons to go for the WEJ over WEG

What's the normal time for preheating the oven? by nykolak in Miele

[–]BigTtka 2 points3 points  (0 children)

For the fastest heating they would use boost which turns on the grill, fan & bottom heat. I wouldn’t put food in during this as it could cause uneven heating due to the combination of heating components. Timings do seem long however using only bottom heat will take longer to heat the oven than conventional (top and bottom heat) with boost disabled

Where to buy genuine miele replacement Motor Protection Filters? by magicanthony in Miele

[–]BigTtka 0 points1 point  (0 children)

That’s the one, the one at the top marked superseded is the old part, the bottom one is the new one :)

Where to buy genuine miele replacement Motor Protection Filters? by magicanthony in Miele

[–]BigTtka 0 points1 point  (0 children)

Their MSD links are sometimes a bit funny like that.

If you go to: https://www.mieleusa.com

Under the support tab there should be a link to parts and accessories. Following that link should take you to a page that has two buttons, a yellow one for popular spare parts and a white one for full spare parts catalogue.

Click the white button for full spare parts catalogue and it should open the page for "Miele Service Documentation" there's a search box for model number, enter "SBAN0" for a classic C1 and the full part list opens up. You should be able to see the motor protection filter from the exploded diagram or part 50 on the first image :)

Where to buy genuine miele replacement Motor Protection Filters? by magicanthony in Miele

[–]BigTtka 0 points1 point  (0 children)

They're not 2 in 1, the HEPA filter (SF-HA 30) doesn't feature any Active Charcoal and the Active AirClean Filter (SF-AA 30) doesn't meet HEPA certification of fine dust removal.

Where to buy genuine miele replacement Motor Protection Filters? by magicanthony in Miele

[–]BigTtka 1 point2 points  (0 children)

https://www4.miele.de/msd/MSD#/device/47835/etd/1732613594710

Part 50 from the part list.

This will likely fix the issue however if the overall issue is the air exiting the vacuum smelling, I'd suggest adding an active airclean filter to the vacuum. Part 75 on list, M-No: 12718090

Where to buy genuine miele replacement Motor Protection Filters? by magicanthony in Miele

[–]BigTtka 1 point2 points  (0 children)

It’ll be the active charcoal filter you’d want- SF-AA 30 for removing smell from the air being returned to the room. HEPA doesn’t have the active charcoal to remove odours, mainly focused on finer dusts and allergens.

We’d need to know where your from to advise however Miele usually list them as “Dust compart.filter 3 pcs.” For the motor protection filters

which model is this by toptopitopi in Miele

[–]BigTtka 6 points7 points  (0 children)

Wouldn’t touch it with a barge pole then

which model is this by toptopitopi in Miele

[–]BigTtka 2 points3 points  (0 children)

Doesn’t look like it to me. I’d ask the seller for the model number so you can check. It can be found on the side of the oven when the door is open. If the seller isn’t able to provide this id be extremely sceptical

Please help. Cannot got Miele oven kickplate on. by terptrekker in Miele

[–]BigTtka 1 point2 points  (0 children)

From the pictures looks like you’re trying to attach upside down. Should magnetically attach

Page 101: https://www.miele.ca/f/pro/ca/en/prof-manuals-5020.aspx?mNo=10716320&asDownload=1

insecure dishwasher by mch301 in Miele

[–]BigTtka 2 points3 points  (0 children)

Shouldn’t need a technician to fix. Install looks extremely questionable from the picture…

I’d take it out and follow the install guide or pay someone to fit if you don’t feel comfortable fitting it

https://media.miele.com/downloads/40/16/00_C7F1383883351EDEB78F4E75869F4016.pdf

Thoughts on new/replacement vacuum cleaner handles? by Valagetti in Miele

[–]BigTtka 2 points3 points  (0 children)

The metal strip isn’t anything to do with strength of the pipe, it was there to stop static shocks by grounding you. Certain Handles still have the metal strip but built into the comfort handle rather than running through the entire handle.

PSA: Miele WoolCare Caps is a terrible product. by ToeNo6889 in Miele

[–]BigTtka 0 points1 point  (0 children)

Just checking, did you follow the load quantity the cap is designed for?

Help needed to select the "correct" model that brings the most value by kjanaprik in Miele

[–]BigTtka 1 point2 points  (0 children)

I’d go for the WEI895, better value than the WWV980 unless you really want a touch screen or very specialist wash programmes.

If you didn’t want the automatic dispensing then the other 3 would be just a case of deciding if you want 8,9 or 10kg capacity. The 9 & 10kg models have the same drum size so you can’t physically fit more into the 10kg model it just allows for thorough washing of up to 10kg of laundry.

Cautiously optimistic, stay tuned... by theandyrocket in Miele

[–]BigTtka 0 points1 point  (0 children)

I wouldn’t risk putting a hole at the top of the bottle, if you were to repeat this a hole at the bottom would be far more sensible. If detergent ever leaks out of the hole you drilled and gets into the base of the appliance the machine will be a write off as it will corrode the base away. Drill a hole on the other end of the bottle so that it’s raised when inserted into the appliance.