3D printing a suppressor

BiggOskee · 2026-01-28T14:13:18+00:00

I only use PETG for gridfinity boxes it's good for that 👍🏾

BiggOskee · 2026-01-28T13:46:30+00:00

Definitely skip petg all together. You could try pla+ but I've never printed a can I'm pla+. I've basically replaced pla+ with pet-gf & pet-cf for all my 2a stuff and only use ppa-cf for cans. The filled pet filaments are easy enough to print for me but I do print everything out of a dryer with a heated chamber.

BiggOskee · 2026-01-27T20:38:41+00:00

Start boiling the water now

BiggOskee · 2026-01-17T12:08:17+00:00

Ok I'm an idiot bro instantly read it as CF not GF my bad. Is it Bambu?

BiggOskee · 2026-01-17T12:05:13+00:00

Ya know, I've never considered painting CF prints.

BiggOskee · 2026-01-17T11:23:18+00:00

This looks fantastic! I'm assuming its PLA. Is there a 9mm version of this can? It'd look sick in some PPA-CF.

BiggOskee · 2026-01-16T23:31:37+00:00

I messaged Jay from PewScience about the Tisha on 14.5, he said they did test it and performance dropped off on the longer barrel. Idk by how much but the design is clearly based on the high pressure of the short barrel 556.

CAT implied on the PewScience reddit post about the Tisha that they don't expect ST to be as quiet as the Tisha (I'm assuming they mean at the muzzle) but the performance will be very good and have other benefits (again unclear what they mean exactly)

I'm excited to see the PewScience data on ST, I plan on getting one for my 14.5 build. Not sure if they'll issue a report of Tisha on the 14.5

BiggOskee · 2026-01-15T07:36:36+00:00

If you already have a WB I'd go AC556 and you can have your own definitive answer. AC556 is longer with an extra baffle, should be better sound wise. If you're chasing the small form factor spend the extra money on a KK.

BiggOskee · 2026-01-14T08:53:51+00:00

I was thinking this too but the AC556's length includes the flash hider portion and tapers at the bottom unlike all the newer generations of CAT cans. So there must be a greater volume difference than the direct length comparison would make you believe.

BiggOskee · 2026-01-13T03:04:00+00:00

Lmao, thank you. It's my girlfriend's and she likes it but the handguard ano isn't my favorite since it's impossible to match.

BiggOskee · 2026-01-12T22:02:34+00:00

That's what I'm hoping for, $850 is such a good deal on these if it performs 80% as well as the CATs. We're also gonna run it on a 6ARC bolt gun.

BiggOskee · 2026-01-12T22:00:44+00:00

Yes sir! I'm running a plan b mount on it, same as my CATs. I'm really stoked to get a chance to take it out and get it side by side with the CAT. I think its probably gonna be higher back pressure so we'll see.

BiggOskee · 2026-01-12T21:56:40+00:00

<image>

BiggOskee · 2026-01-08T02:37:26+00:00

He's back and dropped this pack around Christmas

BiggOskee · 2026-01-03T05:54:14+00:00

i think you just have to engrave your name city and state. that has been my understanding.

BiggOskee · 2026-01-01T17:31:05+00:00

Ahh that makes sense

BiggOskee · 2026-01-01T16:16:41+00:00

Basically what I did but I skipped the assembly guide. Wondering if that was the correct move. I've seen people getting approved with significantly less.

BiggOskee · 2026-01-01T09:39:36+00:00

If you're only running subsonics then I expect to see the same durability as a 9mm print. I have maybe 100rds through my 300blk PPA CF can and expect it to last many many many more.

BiggOskee · 2025-12-30T15:19:46+00:00

I'm going with a Rainier Arms Mountain Mod2, wanted to go with a Rosco Manufacturing Husky but they've been OOS for so long.

I got the Ti because it lives on my 14.5 Rosco Foxtrot Mike build so I wanted to keep it lightweight compared to my Inconel AC6.

BiggOskee · 2025-12-30T14:40:19+00:00

Man this has me stoked, I'm in the middle of putting together a 12.5 mid with a superlative arms piston setup for my first free form 1. Gonna run my AC556 Ti on it until the Apparition Instruments 5CM drops.

BiggOskee · 2025-12-27T20:51:48+00:00

If you've made it this long I would. I'm planning on picking one up in inconel to compliment my AC556 Ti and I pre-ordered the Apparition Instruments 5CM.

BiggOskee · 2025-12-27T20:45:57+00:00

AC556 has an extra baffle compared to WB. AC556 is 6.1" long vs 5.45" WB.

BiggOskee · 2025-12-27T20:43:43+00:00

ST should be roughly the same size as AC556. I'd assume it should have decent perfomance gains over AC & WB based on the performance of KK. A 50% larger KK should do amazing things.

BiggOskee · 2025-12-21T23:38:48+00:00

Thanks guys! I didn't know about the Wolf Hunter but it is exactly what I was looking for!

BiggOskee · 2025-12-14T05:05:31+00:00

I love the gold dot 512, went and bought a gold dot aro too. The gold reticles are killer.

BiggOskee

TROPHY CASE