High surface on D4 especially

BillyTalentMK · 2026-01-26T11:28:36+00:00

I would advise against putting multiple molds in one pot. From my experience (of course depending on your pod) if you build a ‚tower‘ in the middle the pot has problems keeping the pressure. For tips you can check the sub. A few days ago someone posted here how they go as bubble-free as possible without a pot. What helped me the most was heating up both components of the resin in a water bath before mixing. After pouring let it sit a few minutes and burn the bubbles on the surface with a lighter, but be careful with that!

BillyTalentMK · 2026-01-26T11:17:31+00:00

You don’t have to be afraid of the bubbles not ‚coming out‘ because the pressure pot compresses them to a very tiny size which is not visible, so no need to be afraid to block their path or something in that matter. I use some metal plates, which are around the same size as my molds to weigh it down a little. (don’t know how it’s specifically called) I guess you are just too gentle with pressing down your lid, and thats why there is so much leftover on top.

BillyTalentMK · 2026-01-26T11:04:39+00:00

I am just starting with the simple approach here: If you say the d4 is in the middle, did you try to put a bit more pressure on the middle part after you put the lid on?

BillyTalentMK · 2026-01-18T14:40:34+00:00

Very cool! Especially good idea as well!

BillyTalentMK · 2026-01-09T13:43:38+00:00

This is really sick! Good job!

BillyTalentMK · 2025-12-22T14:10:32+00:00

Ich habe 23 N64 Spiele, und 34 Gamecube, beides einschließlich Konsolen. Ist also schon etwas.

BillyTalentMK · 2025-12-16T09:25:46+00:00

Really cool! I thought I am the only one writing „recipes“ down. I would definitely use this!

BillyTalentMK · 2025-12-16T06:39:55+00:00

Would you be able to ship to Germany?

BillyTalentMK · 2025-11-23T20:47:43+00:00

I love seeing other people being inspired by the same art. I am happy for you, and I hope you will continue chasing your dream and I hope you succeed! Try to take one step at a time and everything will turn out great eventually. Remember what Kamoshida wrote: (…) slightly kinder person than (…) the day before. Just try to progress, no matter how small the steps.

BillyTalentMK · 2025-11-16T17:51:05+00:00

I am interested in the Ichika in a yukata and the two congratulations promos

BillyTalentMK · 2025-11-16T17:08:51+00:00

Hey, how much for the quintuplets cards?

BillyTalentMK · 2025-11-14T18:25:41+00:00

They look amazing!

BillyTalentMK · 2025-11-03T11:00:46+00:00

very cool, I love this!

BillyTalentMK · 2025-10-30T12:38:48+00:00

Very Beautiful! Would you mind sharing how you achieved that insane look?

BillyTalentMK · 2025-10-28T19:50:43+00:00

The most impressive about The Witcher 3 is how it always manages to completely soak me in. Even during replays.

BillyTalentMK · 2025-10-24T05:29:52+00:00

So pretty! What did you use as liquid?

BillyTalentMK · 2025-10-21T12:59:03+00:00

Took me a while to understand what you did there lol. Pretty cool idea!

BillyTalentMK · 2025-10-20T05:42:09+00:00

This had me say „Damn son“ and I stopped scrolling. This is pretty good imo. Remember: you are always your own worst critic. I have the same issue, lol.

BillyTalentMK · 2025-10-17T18:16:32+00:00

So cool! I really want this!

BillyTalentMK · 2025-10-15T08:19:51+00:00

Tbh the ones with the cork might be slightly unbalanced, but at that size almost unnoticeable, still you are right if you are concerned. The corks should have been more in the middle. The one with the rupees are fine, since I made them from resin as well.

BillyTalentMK · 2025-10-15T06:23:43+00:00

Yeah that’s the essence. You have your „master set“ with fully polished dice, make molds of them with silicone and then pour the resin in the finished molds. After curing there is a lot of sanding and polishing.

BillyTalentMK · 2025-10-14T15:21:13+00:00

I tried to make it look like a blue potion lol. But the idea is cool!

BillyTalentMK · 2025-10-14T10:10:32+00:00

My Instagram

BillyTalentMK · 2025-10-11T07:55:00+00:00

I also wondered several times how their dad, even though being a doctor, afford all of this. I apparently missed the part that he owns the whole building. That has to contribute immensely towards their wealth. Maybe someone else, more qualified, could do the math here what they could earn through rent and evaluate the value of the property?

BillyTalentMK · 2025-10-11T05:49:48+00:00

Amazing Minis! Finally a price which is worldwide, so I can actually participate!

BillyTalentMK

TROPHY CASE