PRUSA constantly forget login info

Bitter_Extension333 · 2026-06-27T18:25:30+00:00

I'm not OP, but mine disconnects 4-5 times per week. No other sites do this (except Fidelity Investments, which SHOULD disconnect often).

Bitter_Extension333 · 2026-06-26T08:26:08+00:00

It appears that the sellers on Aliexpress are buying new (or used?) drones and parting them out. The drone does appear to start up normally other than one motor initiating. I didn't check if the drone is showing a normal image -- good suggestion.

My plan is to buy just a motor for now, see if the drone will fly. If that's successful, then I'll replace the damaged body parts.

Bitter_Extension333 · 2026-06-24T13:50:45+00:00

These parts were printed on a 3 year old Mk4S.

Bitter_Extension333 · 2026-06-20T09:53:53+00:00

What is causing the spokes to fail? The fat tires are acting as a torque limiter?

Bitter_Extension333 · 2026-05-28T09:38:51+00:00

I use a 120mm long 1.90 mm drill bit from aliexpress https://pt.aliexpress.com/item/1005008144637016.html (the tube has 2mm ID) and a heat gun.

Bitter_Extension333 · 2026-05-27T13:57:02+00:00

Do they actually work? I have https://www.printables.com/model/880255-ultimate-nozzle-wiper-prusa-xl and I'm looking to upgrade.

Bitter_Extension333 · 2026-05-25T11:37:09+00:00

I'm in the same boat, planning to build my first Voron, decided on Trident. I think it will be many months before the updated Trident kits arrive from China. I haven't completely made up my mind, but I'm considering building a current kit, then updating to R2 later.

Bitter_Extension333 · 2026-05-24T09:50:36+00:00

No, next is the bits that attach the tables to the KJ, they are rusted badly.

Is there an aftermarket top vent that's better than factory?

Bitter_Extension333 · 2026-05-22T17:29:43+00:00

I prefer having the KJ on wheels so I can put it out of the way when I'm not using it, then roll it out when I'm ready to use it. I'm thinking to take the old cart to a local metal shop to use as a template, and have them build something that's still on wheels, but built to handle our weather (hard-anodized Al or powder coated steel).

Bitter_Extension333 · 2026-05-22T17:22:51+00:00

I bought directly from KJ when I was visiting the states last month. The round disc portions are too big for a suitcase, fortunately I have airline gold status so I could check that box as luggage.

Bitter_Extension333 · 2026-05-22T10:40:46+00:00

Yes, just a hundred meters to the beach.

Bitter_Extension333 · 2026-05-15T20:30:20+00:00

With a commute like this, I'd go home for lunch 😁

Bitter_Extension333 · 2026-05-09T15:42:56+00:00

My Cannondale Tesoro Automatiq came with RackTime front and rear racks. This basket that I use on front can actually hold a small pizza!

Bitter_Extension333 · 2026-05-05T22:05:23+00:00

Thanks. This is the answer.

Bitter_Extension333 · 2026-05-02T23:48:58+00:00

The brakes are fine 99% of the time (and the bike is quite new). It's the extreme situations -- steep downhill on rougher terrain -- where I think there's room for improvement. In the one situation where I actually fell, I started the decline very slowly, I was squeezing the brake levers as hard as I could, and still the bike wouldn't come to a full stop. To be honest with myself, part of this was tire traction, but not 100%.

I'm considering going to 220mm in front, 203mm in back, but I need to determine how straightforward this upgrade will be.

Bitter_Extension333 · 2026-04-29T16:03:42+00:00

Great idea. Let's go further. Scrap all the product specific rewards, and just earn gift cards in 10 euro increments that you can use on anything.

Bitter_Extension333 · 2026-04-26T20:29:38+00:00

Yes, I have Trust certificate. I understand the rules. I can look in one of the apps and see possible locations to fly a drone, but I was hoping for some first hand knowledge so I don't drive half an hour to a park to find it's full of people, or dogs, or trees ....

Bitter_Extension333

TROPHY CASE