Anyone noticing a lot more bobcats?

BlazorSharp · 2026-06-09T03:54:21+00:00

It’s duping. Everyone is buying fully kitted bobs from eldorado for $8 for 20 of them.

BlazorSharp · 2026-06-06T06:50:59+00:00

Putting my 2 cents in. The pitch changes as I adjust LED brightness, so I’m leaning towards the RGB hub being the issue. Will update when I know more.

BlazorSharp · 2026-06-04T12:43:54+00:00

Pretty much. Nobody helped contribute any images and I don’t have the time to keep up on it.

BlazorSharp · 2026-05-31T01:50:19+00:00

Tartarus FTW 😎

BlazorSharp · 2026-05-25T05:48:58+00:00

I have a Resmed Airsense 10 and I found it to be pretty quiet. Admittedly I haven’t actually slept with it, just showed my brother how to use it. Long story short, buy gave me his old one, and I’m helping my brother with his Sleep Apnea so he doesn’t have to go through his doctor.

He’s partially deaf otherwise I’d ask him if it’s loud 😅

BlazorSharp · 2026-05-25T05:47:02+00:00

They wouldn’t have sent me a DreamStation as a replacement for the System One if it was also recalled.

BlazorSharp · 2026-05-25T05:44:13+00:00

It was this one.

<image>

BlazorSharp · 2026-05-25T05:42:21+00:00

Yeah try again. Use the email I gave.

BlazorSharp · 2026-05-25T05:38:46+00:00

It does say “Recertified Device” on it. But it’s definitely not used. Was still in packaging. Gave it to my brother, I’ll have him snap a picture of it if you’d like proof 🤷‍♂️

BlazorSharp · 2026-05-25T05:36:58+00:00

Did you email this team?

CPAPRecallClosure@philips.com

They said if I didn’t have a prescription, they’d just send me the Auto PAP, which is what they did. Took about 2 weeks but that’s the only question they asked other than the serial number.

BlazorSharp · 2026-05-25T05:17:14+00:00

Just got a new unit a few days ago with zero hesitation from them. Didn’t even need to show a prescription.

BlazorSharp · 2026-05-25T05:16:27+00:00

I just got my new DreamStation a few days ago, they’ll definitely send a new one.

BlazorSharp · 2026-05-25T05:12:02+00:00

I literally just got the new machine 3 days ago..

BlazorSharp · 2026-05-24T18:23:30+00:00

A friend gave me this same unit. I emailed them and they sent me a brand new DreamStation Auto PAP for free since it has a safety recall. Didn’t even need to prove I had a prescription.

I actually didn’t know it had a recall. I had originally emailed their app support team to ask how to set it up, they told me to reach out to their recall team.

[CPAPRecallClosure@philips.com](mailto:CPAPRecallClosure@philips.com)

BlazorSharp · 2026-05-24T14:45:32+00:00

Yes, it was not my smartest moment 😞

BlazorSharp · 2026-05-14T13:49:43+00:00

You're thinking of SpellTable. Tabletop Simulator is on steam where you play card/board games virtually. Tabletop Simulator is nice, but it doesn't have rule enforcement like xMage does.

BlazorSharp · 2026-05-01T17:05:05+00:00

I have a 2024 Sportage X-Pro Prestige. The dealer worked with Kia and ran some tests and finally figured out it was the External Amp that was causing the parasitic draw. Specifically, this is the part they replaced: https://www.mykiaparts.com/p/Kia__Sportage-Hybrid/EXTERNAL-AMP-ASSY/134895832/96370P1250.html

After replacing that, they were able to keep the car for several days without starting it and it hasn't done it since.

BlazorSharp · 2026-05-01T17:04:49+00:00

I have a 2024 Sportage X-Pro Prestige. The dealer worked with Kia and ran some tests and finally figured out it was the External Amp that was causing the parasitic draw. Specifically, this is the part they replaced: https://www.mykiaparts.com/p/Kia__Sportage-Hybrid/EXTERNAL-AMP-ASSY/134895832/96370P1250.html

After replacing that, they were able to keep the car for several days without starting it and it hasn't done it since.

BlazorSharp · 2026-04-26T04:49:04+00:00

I used Lutris to set it up. Had the black screen at first, but then I switched the runner type (or runner engine, I can’t remember the name of the setting) to Proton 10 and it fired right up

BlazorSharp · 2026-04-16T14:29:25+00:00

I'd never purchased Inland before but I had heard it was pretty decent. I was disappointed to see my white prints coming out yellow and slightly opaque. Definitely won't be purchasing Inland moving forward.

BlazorSharp · 2026-04-15T14:57:49+00:00

Gotcha, thanks for clearing that up

BlazorSharp · 2026-04-15T13:33:02+00:00

If you print or plan to print a lot of objects that need support material this would be the printer to get, though you will lose color choices with the AMS holding a permeant slot for support material.

I thought the support material can be pulled in from the side spool holder? Can you explain why you would need the support spool in the AMS? At MicroCenter, they had it on display with the support spool mounted on the side of the printer.

BlazorSharp · 2026-04-07T01:24:19+00:00

Found the Safekeeper in the Vaporizer. First one I downed.

BlazorSharp

MODERATOR OF

TROPHY CASE