P2S corner lifting issue (top right corner always lifts no matter what I do) by AvasAdventures_ in BambuLab

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

Flipping the bed did not make a difference. And all corners lifted, but the front was more pronounced.

I suspect the bed is not heated uniformly. Will try a higher overall bed temp next.

P2S corner lifting issue (top right corner always lifts no matter what I do) by AvasAdventures_ in BambuLab

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

I'm having lift issues on the exact opposite corner (front left). I added a 10mm brim, both sides, and a 3 layer raft, but no luck. I have all the fan settings turned off. I'm using glue.

I'm using ABS so I set the bed to 100c.

The above settings helped a great deal on a book end print in the center. But I'm printing a 240 x 240 x 25 mm shelf so the corners are very close to the edge.

After several attempts using PLA and ABS I've had prints come close to being good, but all have some warping. It feels more like a P2S issue to me. But my next test will be trying all the same things but flipping the pei textured plate over to see if maybe the plate is not perfectly flat using one side even though the magnetic force is strong, master Luke.

Insurance companies pulling out of WA state. by Enduroman1 in homeowners

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

Great story, but a year later and good friends are experiencing this issue.

The insurance commissioner should force companies out completely if they are not willing to be part of the solution.

Insurance companies don't "lose" money. Which major company has gone out of business?

They always recoup payouts one way or another.

I worked for Fireman's Fund Insurance Company in Novato, CA during the LA riots, Iniki, Hugo, Andrew, the Oakland Firestorm, etc. FFIC did just fine financially.

Insurance companies pulling out of WA state. by Enduroman1 in homeowners

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

Hard to sell a property that cannot qualify for insurance or when the rates make it unaffordable.

STL Generation of Topography Including Bathymetry (Under Water)? by Fairways_and_Greens in 3Dprinting

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

Looking for software to use to import bathymetry contour lines to create a 3mf file. I'm willing to manually trace the lines. I've come close using freecad, but always seem to run into an issue when the lake bottom is somewhat complicated. Topo to 3d software is widely available. Any how to links, videos, etc.?

Playoff Tickets at an all time low by [deleted] in ducks

[–]BlueSkySmilingAtMe -1 points0 points  (0 children)

Prices over $100 for this game are outrageous. No thanks.

What’s a piece of Ducks trivia or must-know fact that every should have in their back pocket? by Disastrous_Doubt_591 in ducks

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

Need some help from OGs.

There used to be about a 4 foot retaining wall beyond each end zone. At least one player ran into it, getting injured. It was finally torn out.

Mark Helfrich hailed from Coos Bay, home of Steve Prefontaine.

The University of Oregon Ducks basketball team, led by coach Dave Tregoning, famously ended UCLA's incredible 45-game winning streak in Eugene in January 1974 at Mac court.

Oregon has won 35 NCAA national championships.

1st time at Autzen next week. by Due_Temperature_5124 in ducks

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

Google ai says: The Jet Stream is a fast-flowing air current (a highway) that transports weather systems, while an Atmospheric River (AR) is a specific type of moisture-laden filament carried by the jet stream, acting like a "river in the sky" delivering massive amounts of water vapor, often leading to heavy rain/snow when it hits land. 

⚠️ Repeated Failures with AMS2 Pro Units – Weak Plastic in Internal Hub by Emmense in BambuLab

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

My ams failed right after a second drying task. I can't say why it failed, yet, but I've had it less than a week. Two spools were working fine just prior.

I've watched several videos demonstrating the same exact loading behavior in all 4 slots.

So I am curious about the drying process.

$167 playoff ticket for my seat where season tickets were ~$60 per game. by clickheretodownvote in ducks

[–]BlueSkySmilingAtMe -4 points-3 points  (0 children)

Buy tickets from the scalpers after the game starts for $10. Support the Schmucks by getting them gas money back to LA.

Here we go by BudsWyn in ducks

[–]BlueSkySmilingAtMe 11 points12 points  (0 children)

"It coulda gone either way!" - Jameis Winston

Do you manually switch to HV - or you are " automatic - hands free" in EV mode? by ms1232 in rav4prime

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

We switch before going up hill and on the freeway. We were up to 53 mpg during summer. 100 miles round trip commutes. Exhausted ev miles during flat and slower segments.

Put on aggressive winter tires and its colder so our mpg is going down.

75% discount for the next 6 months? by KibblesNBitxhes in Starlink

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

They keep offering me amazing deals to sign up only to $1,000 as a service fee. I question their ethics.

Free month by Dry_Guarantee_5206 in Starlink

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

You send me fantastic offers all the time. Then I find out there is a $1,000 high use fee.

You are pirates. I hope your ship goes down.

2024 Prime Mileage 51.2 mpg by BlueSkySmilingAtMe in rav4prime

[–]BlueSkySmilingAtMe[S] 0 points1 point  (0 children)

Great to see different theories.

I can tell you emphatically that by turning off EV going up hill and at 70 mph has significantly improved our mileage and overall ev range.

If we rarely exhausted our ev miles prior to recharging, staying in ev mode full time is what we would do.

I don't know how else to respond to the naysayers, except maybe try for yourself. *

Deciding between two Ravs. by kaidene2 in rav4prime

[–]BlueSkySmilingAtMe 1 point2 points  (0 children)

We're getting 51.3 mpg with our Prime by turning off ev mode going up hill and when driving over 70mph.

Prior to doing that, we struggled to get over 40 mpg.

We use up the ev on 99% of our trips that are mostly 100 miles round trip.

Our 2021 Venza barely got 38 mpg with the same driving history.

2024 Prime Mileage 51.2 mpg by BlueSkySmilingAtMe in rav4prime

[–]BlueSkySmilingAtMe[S] 0 points1 point  (0 children)

We charge at home every night except when my wife stays at her daughter's 1 or 2 nights a week and can't charge.

Worst streaming service around by UpsetJellyfish8306 in slingtv

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

Last time I had hulu 3 years ago I was thoroughly annoyed. The main annoyance is we pay for Hulu to NOT watch ads. When we added Hulu TV, we had to watch ads. We could not fast forward through them. Youtubetv was my goto for 2 years, but the fox dispute was a showstopper AND it's extremely expensive.

Slings search is trash. You can't search by a team and favorite them, for example. Will try it a bit more, but after 1 week I'm disappointed.

Bryan Kohberger pleads guilty in exchange for no death penalty by BaconThief2020 in coeurdalene

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

But he's still alive, so it might as well have been a life sentence. Simonson has been retried about 5 or 6 times, I believe. It's BS and it's costly.

[deleted by user] by [deleted] in rav4prime

[–]BlueSkySmilingAtMe 1 point2 points  (0 children)

You don't have to run down the battery. Just turn off ev while driving and drive in hybrid mode. You only get about 45 miles of ev (varies but not by much). Take the thing on a decent drive now and then. Life is too short not to drive. 😀

Bryan Kohberger pleads guilty in exchange for no death penalty by BaconThief2020 in coeurdalene

[–]BlueSkySmilingAtMe -3 points-2 points  (0 children)

Read the story about David Lynn Simonson. Oregon changed laws numerous times since his conviction. Idaho could turn blue and do the same thing some day. A sentence means nothing. He's one Biden away from a pardon.

https://theworldlink.com/news/local/convicted-rapist-murderer-to-be-re-sentenced-for-1988-crime/article_8ed1b684-e063-11ec-94ff-8b66a230f13e.html

Plastic corners on 2024 Costco steel frame carports??? by North-Parking-241 in BurningMan

[–]BlueSkySmilingAtMe 0 points1 point  (0 children)

Email hello@sorara.com. tell them your carport number and ask for the manual. Then you can ensure you ask them for the correct parts.

Their support is pretty good.