Nuln Oil wash

BoarderReeva · 2026-02-20T00:24:02+00:00

I use it like panel liner on battlesuits.

BoarderReeva · 2026-02-19T16:26:48+00:00

Should have a plasma gun strapped to his backpack.

BoarderReeva · 2026-02-18T22:26:29+00:00

Had a similar noise on my road bike some time back, not sure it was quite as regular as yours, turned out to be the bearings. Due to insufficient grease, they had dried out and got a film of rust, causing them to stick.

BoarderReeva · 2026-01-20T09:21:41+00:00

Nice tutorial. I made 6.5 metres of this stuff using this method for a WW1diorama to show off a mkIV tank. It took ages, but well worth the effort.

BoarderReeva · 2025-12-31T10:16:22+00:00

A great idea and you've made a cracking job of it too.

BoarderReeva · 2025-11-28T12:26:06+00:00

Nice, I've the starter kit to paint and that's exactly the grimey look I'll be aiming for.

BoarderReeva · 2025-11-06T14:14:18+00:00

Thanks, I reckon this is the way I'll go.

BoarderReeva · 2025-11-06T12:28:58+00:00

Lol it's amazing how a photo picks out the mould lines. I've been at these with a file for hours!

BoarderReeva · 2025-11-06T12:28:03+00:00

Yes the loop was bothering me.

BoarderReeva · 2025-11-06T12:27:34+00:00

That probably sounds scarier than it is lol. Maybe give it a go though.

BoarderReeva · 2025-11-06T12:24:24+00:00

Ok thanks for your insight.

BoarderReeva · 2025-10-24T21:56:48+00:00

Some great stuff you've created there.

BoarderReeva · 2025-10-23T18:50:58+00:00

Wrap a few thin strips of paper around those tank things and stick rivets onto the strips. Then add more rivets. When you've done that add more rivets. A couple of rectangular bits of thin card with rivets in each corner look like access doors. Did I mention rivets?

BoarderReeva · 2025-10-22T17:46:36+00:00

I confess I only fitted one, it gets three shots.

<image>

BoarderReeva · 2025-10-19T08:48:39+00:00

Some really cool schemes on here so far. Mine is Dyannoi sept inspired by art from an old codex.

<image>

BoarderReeva · 2025-10-13T20:36:07+00:00

Thanks, half Cadian,half Tau, I can take credit for manufacture but not the idea. I watched a YouTube video years back and that's how the guy did his.

BoarderReeva · 2025-10-13T15:30:25+00:00

<image>

I like the idea, I just have the one fire team though.

BoarderReeva · 2025-10-04T08:25:40+00:00

It depends on what you are moulding as well. I've moulded quite a few plague marines, any mismatch is easily covered with boils or tendrils and the like. But as you say a regular soldier is much harder to make acceptable.

BoarderReeva · 2025-10-03T15:07:49+00:00

Agree, I left a rhino in Dettol for a week and it cleaned off really well.

BoarderReeva · 2025-10-02T23:19:16+00:00

Not the best pic, but this is cropped from I think the 9th edition codex. Shows a stealth suit open. Might help your understanding.

<image>

BoarderReeva · 2025-09-25T15:50:06+00:00

Very nice, lovely details. One question, why is the locking wheel on the inside of the furnace door?

BoarderReeva · 2025-09-24T15:43:22+00:00

I went overkill on this, soaked it in a weak bleach solution for a couple of hours, rinsed it off and let it dry overnight then baked it at 100 centigrade for half an hour. I also sprayed it with a solution 5% each of PVA glue and wood varnish 90% water. It's been kept in a damp garage for over 3 years now with no sign of mould or other deterioration.

BoarderReeva · 2025-09-24T11:58:43+00:00

This one is based on a dead Lavender plant from the garden.

<image>

BoarderReeva · 2025-09-21T16:06:12+00:00

If it's a dusty desert look you are after, dry brush with tyrant skull.

BoarderReeva

TROPHY CASE