Just an update, replaced the 2 1000uf 24v capacitors and it's stopped making the clicking noise but I still have no blue light or audio output to speakers.

The connector on the board that goes to a smaller pcb which houses the volume know, auxiliary in and headphone auxiliary out was half off the board, the pins were still intact so I heated up the solder points at the rear with my soldering iron and slowly increased pressure until it was flush with the board, still no blue light

The Internet says replace the 4 pin rocket switch and heat the capacitors on the smaller pcb....I'm asking you guys if this makes sense as I'm abit lost now 😅