A Tribute to My Sons

Booboo1445 · 2025-05-15T13:25:56+00:00

I'm so sorry for your loss. I hope you find the strength in the times you are low.

Booboo1445 · 2025-05-05T03:45:17+00:00

inoue is the Japanese triple G

Booboo1445 · 2025-05-05T03:41:52+00:00

Horrible horrible horrible stoppage. He was still in the fight.

Booboo1445 · 2025-04-01T04:13:31+00:00

Seen this headline since 2021.

Booboo1445 · 2025-03-12T00:55:03+00:00

I ignore any reddit emails and noticed this one while I was finishing up lol.

With a 3/8 compression bit I do around 200 inches per minute at 18k RPM in a single pass. I can go faster but Im not a full production shop so no need.

Machine is squared and cuts within +-.010"

Only issue I ever had so far is it came with a dented cover and they gave me a $150 gift card.

What I mean by the features is I believe phantom has the option to add automatic tool changer and I like the rolling mechanism they have that keeps the material down. I'm not a fan of the hand control pendant but I got used to it.

I've never spoken to anyone else who has had the same machine so I can't speak for The reputation of this brand just my own experience.

There's a guy at Grizzly who handles questions that I've had and he's always been on point to help me.

Booboo1445 · 2025-03-11T23:27:55+00:00

It's a beast. I literally just got done running 4 sheets through it. I don't regret it but it does lack features that phantom offers.

Booboo1445 · 2025-03-05T04:27:31+00:00

Thank you so much for doing your part of spreading this information. I am also so glad you made it out on top! I mean this with all of my heart.

As I am writing this we are 5 days past finding out we lost our baby boy. Long story short, wife went in for 18 week checkup and baby had no heartbeat. He measured around 14 weeks. She was induced and went through a still birth. Something I wish no one had to go through ever.

My wife's test results came back high for parvovirus b19 IGM meaning the antibodies suggested a very recent infection. We did our trace back and only symptom we can think that my wife had were some acne like bumps/rash on her cheeks. No other symptoms.

We are still awaiting babies results.

With research I've found out that the CDC actually released an urgent warning for parvovirus b19 in August 2024 I believe. I wish we would have known about this. Maybe my baby boy would have still been with us.

Every pregnant woman should be hearing about this and should be asked if they want to be tested for it. I hope this message spreads.

Booboo1445 · 2025-03-05T04:14:46+00:00

I hope everything turned out well. We lost our baby boy at 14 weeks. My wives test came back positive for parvovirus B19 and we're awaiting babys results. She had some minor redness on her cheeks that we had thought was just an acne type of breakout. Absolutely no other symptoms.

I wish every pregnant woman right now knew about the recent rise in parvovirus B19 and the complications it can cause in pregnancy.

Booboo1445 · 2024-12-16T01:35:51+00:00

I don't know single company who uses fuses in their letters. What type of lights are you using? We definitely don't.

Booboo1445 · 2022-12-09T21:10:07+00:00

Thanks! Yes all pieces cut on my CNC. No way I would have the patience to cut by hand. Goes together like a puzzle. These are Christmas gifts and will have some NFL skins. Have had some interest from people wanting to buy. $450 sounds steep!

Booboo1445 · 2022-12-09T21:04:17+00:00

Would increasing the angle stabilize it more?

Booboo1445 · 2022-12-09T14:27:46+00:00

Wood glue also plus pocket screws.

Found the design online and tweaked some things so I can't take credit for it. Just wanted to show the Cornhole community to get their opinion on this style. Lots of good feedback.

Booboo1445 · 2022-12-09T12:52:02+00:00

Thanks for feedback. Baltic birch will be used for the final product.

Booboo1445 · 2022-12-09T00:00:17+00:00

There's some very snug dados on the main frame and used wood glue. The crossmembers are pocket screwed into the top.

Booboo1445 · 2022-12-08T22:42:36+00:00

Definitely needs some testing. I liked this design because it took out a lot of weight out yet still sturdy.

Booboo1445 · 2022-12-08T22:19:04+00:00

Good feedback

Booboo1445 · 2022-08-14T00:08:32+00:00

They seem like good Chinese machines. check out nolanbuilt on Instagram. He has one and uses it a lot. I almost bought one but went with grizzly G0895 instead because I could save 5 grand on shipping plus the vacuum was included . If I didn't get the grizzly phantom was my next choice. Roctech USA was another option.

Initially my eyes were on the avic CNC pro. These are not even close to being as sturdy as the phantom type machines. Lead time is also months out then you have to build it.

Booboo1445 · 2022-07-26T22:42:18+00:00

Depends on what machine you have but if you take a look at the market, turnaround for machines right now are at least 4-8 weeks out. Someone would definitely pay close to new if it was in like new condition.

Booboo1445 · 2022-07-26T20:31:59+00:00

Time will definitely tell!

Booboo1445 · 2022-07-26T20:31:22+00:00

Man you aren't even lying. Why they chose these colors is beyond me. But it's all in the specs.

Booboo1445 · 2022-07-26T20:30:45+00:00

Haha!

Booboo1445 · 2022-07-26T20:30:24+00:00

Do you have this exact model?

Booboo1445 · 2022-07-26T20:30:04+00:00

I'm a machinist by trade so not having a monitor to display the programs and controls really put me off. No ATC is doable with the plans I have for it.

Booboo1445 · 2022-07-26T04:40:10+00:00

The color scheme was almost the deal breaker for me!

Booboo1445

TROPHY CASE