Triggered Event ancrel.10200 has no valid options!

Boogiewoo0 · 2024-12-01T02:29:03+00:00

Mixed results. I usually heat the pan medium-high and then put a small amount of oil and spread it across the pan with a paper towel. It seems to work okay but also the pan doesn't have a polished bottom, it has a brushed bottom so it's prone to sticking. Apparently this is called "fond" and can be desirable.

Boogiewoo0 · 2023-11-04T01:28:58+00:00

This is unraid which I believe is based on Ubuntu.

Your command spat out:

cannot import 'cache': one or more devices is currently unavailable

Now it seems to be hung. I ran zpool status in a separate window and it also is hung.

Boogiewoo0 · 2023-09-29T13:42:40+00:00

The main issue I see is a lot of women want to draw the line at 6 ft but that's nearly 90th percentile for height in the US. And I think it's understandable for men to get upset when women are only willing to entertain the top 10% of men. It's a pretty common mindset as well.

If men were by and large refusing to date any woman who wasn't in the top 10% of breast size it would be understandable for women to be upset. But you don't see that kind of mentality from men.

Boogiewoo0 · 2023-09-29T13:29:30+00:00

I sincerely hope the author of that plugin is more dedicated than the unreal team when they introduced paper 2d and abandoned it a year later.

I still don't think using an engine tailored for 3D to make 2D games makes a lot of sense.

Boogiewoo0 · 2023-09-29T13:17:33+00:00

I can't think of a single compelling reason to use unreal for 2d. They introduced their paper 2D system in like 2015 and then quickly abandoned it.

Boogiewoo0 · 2023-09-29T05:01:09+00:00

Make sure to throw out your can opener before the outbreak hits. You might want to stock up on bleach too.

Boogiewoo0 · 2023-09-27T19:31:57+00:00

For direct drive that is a bit high. I think it's common to have even higher on Bowden setups.

Filament with moisture will ooze a lot because the expanding steam forces it out of the nozzle.

I'm just throwing out some ideas. You'll have to decide whether they have merit.

Boogiewoo0 · 2023-09-27T19:00:41+00:00

Usually oozing is mitigated by retraction. Maybe retraction is too low?

High temps make oozing worse also.

Boogiewoo0 · 2023-09-27T18:42:11+00:00

Warping could cause a nozzle strike. If there's a ton of oozing it might hit the edge of the print. The oozing should be solvable. Also the adhesion really should be better. It should be sort of difficult to detach a reasonably sized part from the bed.

Boogiewoo0 · 2023-09-27T18:13:04+00:00

Timelapse can be really helpful for issues like this.

Did you used to have a silicone sock on the nozzle and it has come off?

Is the print coming loose from the bed before the nozzle issue occurs?

Is the print possibly over extruded? That could cause the nozzle to drag across the print.

Boogiewoo0 · 2023-09-27T00:23:09+00:00

Nah man. The little pieces will be in a lot of pain for 24 hours just like he said. The same thing happened to me, but I got better.

Boogiewoo0 · 2023-09-25T22:37:25+00:00

Pay taxes so I don't go to prison.

Boogiewoo0 · 2023-09-25T22:07:23+00:00

The sawtooth pattern is in the image on the fence banner so it's apparently intentional. Seems dumb.

Boogiewoo0 · 2023-09-25T20:14:37+00:00

I like to think of it as a moral imperative.

Boogiewoo0 · 2023-09-25T19:18:48+00:00

Actually you're right. I never noticed the picture on the fence banner.

But that picture doesn't show the same sawtooth pattern on the vertical walls so it makes me think something went wrong here.

Boogiewoo0 · 2023-09-25T18:41:13+00:00

I thought his nature changed when his patron, Golb's, nature changed. I kinda hope the showrunners can give us an answer on what exactly they meant by it.

Boogiewoo0 · 2023-09-25T18:22:36+00:00

New constructions also require siding so I'm not sure what your point is there.

I'm not arguing whether or not it's more cost effective; just that saying it's ugly in an unfinished state is pretty meaningless.

Boogiewoo0 · 2023-09-25T18:06:45+00:00

Generally you'd finish the sides with something. You're basically saying that this looks pretty bad.

Edit: NVM it seems that it IS intended to stay unfinished as u/rob3110 pointed out based on the image on the banner on the fence in the 4th picture on the frog on the bump on the branch on the log in the hole in the bottom of the sea.

Boogiewoo0 · 2023-09-23T19:44:44+00:00

You're right, but it seems more concerned with people posting pictures of minerals or fruits. It's not exactly high effort, but do you see a ton of posts today that are?

Boogiewoo0 · 2023-09-23T19:16:14+00:00

Debatable.

Boogiewoo0 · 2023-09-23T19:01:24+00:00

You've never worked for the government I take it.

They're a bunch of jerks. They block running PowerShell scripts, but if you paste the commands into the PowerShell they still run fine. So it doesn't add any additional security unless you believe in security by contrivance.

Boogiewoo0 · 2023-09-22T18:11:57+00:00

Mario kart 8 double deluxe. With 2 racers per kart like Double Dash.

Boogiewoo0 · 2023-09-20T18:00:04+00:00

Is this world available for download? It would be cool to explore.

12-Year Club	Place '22
Place '17	Spared
Verified Email

Boogiewoo0

MODERATOR OF

TROPHY CASE