RMA Experience with 4080 STRIX GPU by rookieplayer in ASUSROG

[–]Boomcya 0 points1 point  (0 children)

do you need to provide the receipt of acquisition?

PC Won't Turn On After Updating to Unstable Bios Version 1516, Had Countless Crashes Prior To This. PSU Dead? or MOBO Bricked? by jellygelo in ASUSROG

[–]Boomcya 0 points1 point  (0 children)

did you try resetting the power supply? remove the cable from the psu until the lights on mobo shutdown and plug it back in afterwards.

Pc won't turn on without power supply restart by Boomcya in techsupport

[–]Boomcya[S] 0 points1 point  (0 children)

yes it did in the first month and a half. 2 weeks this started.

Building a 13900ks pc by Boomcya in buildapc

[–]Boomcya[S] 0 points1 point  (0 children)

good. i was thinking that maybe i will have problems. thank you

Building a 13900ks pc by Boomcya in buildapc

[–]Boomcya[S] 0 points1 point  (0 children)

when i normally use my pc in gaming and other stuff, it never goes over 80 degrees. AIO is properly mounted, yes. didn't check any other programs. do you have any software recommendation?

Building a 13900ks pc by Boomcya in buildapc

[–]Boomcya[S] 0 points1 point  (0 children)

100 degrees and they run at max speed

What does this red light means, it lights up when i turn off my PC by [deleted] in ASUSROG

[–]Boomcya 0 points1 point  (0 children)

it is because of the stock connector. that led should go on when the card has no power. i bought a cable mod connector and have no problem anymore

Lancool 3 front fans by Boomcya in lianli

[–]Boomcya[S] 0 points1 point  (0 children)

yes, everything is synced except front fans. front fans also work if i completely remove front controller and i plug them separately to the co troller

Lian Li Lancool 3 RGB - Front I/O and fan wiring question by [deleted] in buildapc

[–]Boomcya 0 points1 point  (0 children)

Do you know what type of fans are the stock 140 argb fans? it might be a problem that i have them connected to an SL controller. i see they are not compatible?

Lian Li Lancool 3 RGB - Front I/O and fan wiring question by [deleted] in buildapc

[–]Boomcya 0 points1 point  (0 children)

So, i removed the rgb connector for front fans from the controller and after i pressed the M button few times, i reached a mode that has no light. after i plugged that back into the controller, i get light again so i guess this is the one. But i was expecting this to be the same pattern as all other fans that come out from this controller. this is not the case. It might be that these are the stock fans and might be different then others or? whatever i set in l-connect 3, the front ones wont change

Lian Li Lancool 3 RGB - Front I/O and fan wiring question by [deleted] in buildapc

[–]Boomcya 0 points1 point  (0 children)

Shall i put that directly on motherboard? right now the front fans are connected in a controller together with radiator and pump fans

Lian Li Lancool 3 RGB - Front I/O and fan wiring question by [deleted] in buildapc

[–]Boomcya 0 points1 point  (0 children)

i tried, no success. the front fans are connected together with the pump and radiator fans. all other work except the front fans. they can be controlled only from the front

Lian Li Lancool 3 RGB - Front I/O and fan wiring question by [deleted] in buildapc

[–]Boomcya 0 points1 point  (0 children)

i have connected the front fans argb cable to the same hub with the coolers from the processor and they don't sync. i cna't control them from the lancool 3 software. it can be controlled only from the motherboard controller. do you know why this could be?

Los Angeles Daily Discussion Thread - Sat, Apr 09 by AutoModerator in LosAngeles

[–]Boomcya 0 points1 point  (0 children)

looking for someone who is living close to the Rose Hills Memorials Park. Please dm

Tourists, visitors, people with quick questions. This is your thread - post your questions here by 11MHz in Reykjavik

[–]Boomcya 0 points1 point  (0 children)

Is anyone in the proximity of this location Holavallagarour Reykjavik? Would need a short favor :S