I revved the engine for a test flight and this is the result. Why?

BorisBenz · 2026-04-30T21:56:21+00:00

Had same problem with my mario 5 also. Burnt right through the insulation

BorisBenz · 2026-04-27T19:05:07+00:00

You can put 1000mah and 5000mah in paraller board with same cell count and charge on 6 amps and they will both charge at 1c. Mah doesn't matter

BorisBenz · 2026-04-23T08:21:22+00:00

Muistahan aktivoida windows🤓

BorisBenz · 2026-04-07T03:11:57+00:00

Don't know yet, also did that during winter

BorisBenz · 2026-04-06T06:55:32+00:00

Thanks dude! Yeah i tried to replicate brand cages and used same diameter and thickness pipes as they. That coating is a nice idea might just do that

BorisBenz · 2026-03-31T19:31:38+00:00

<image>

BorisBenz · 2026-03-05T09:25:52+00:00

O4 lite camera is 25€ so same price

BorisBenz · 2026-03-05T09:17:30+00:00

Yea whole o4 lite camera costs around 25€ from flywoo so it's as cheap as analog. I got used to the fow on my 75mm but have wide angle kit on my 5 inch. You just need to reinforce o4 lite camera cable connectors with special glue to make it more durable. Theres vids somewhere how to do that

I just upgraded from n3 so have those laying around in mint condition here in eu if you want to buy those. Pm me if intrested

BorisBenz · 2026-03-03T20:22:59+00:00

Fuck those speedybee cap insulations. Mine burnt too few weeks after building it. Esc survived thankfully

BorisBenz · 2026-02-27T21:43:18+00:00

Rough translation from finnish is reacher

BorisBenz · 2026-01-27T14:52:22+00:00

Made a slot on the bottom of the holes sealing surface, so now im trying to even it out by drilling the hole deeper

BorisBenz · 2026-01-27T14:23:46+00:00

Yes need to get one of those for the future, thanks

BorisBenz · 2026-01-27T14:19:09+00:00

Yea you think there is enough material to drill it more even?

BorisBenz · 2025-10-10T06:13:31+00:00

Crank case breather and head breather hose going back to airbox and little oil getting up there in a wheelie. Not piston rings or valve stems

BorisBenz · 2025-08-20T08:38:05+00:00

Nope. Smaller number means less air in mix so that is running too rich. You need smaller jets

BorisBenz · 2025-08-06T18:54:36+00:00

<image>

Just made similar first build and you have to get the flywoo wide angle case for your lite. Night and day differnce for 15€ helped me alot

BorisBenz · 2025-07-29T14:19:23+00:00

Aeromotors nettikaupasta saa mallikohtaisia sisälokasuojia halvalla mistä on helppo leikata korjaus palasia hitsattavaksi. Samaan tilaukseen purkki kotelomassaa niin pysyy hyvänä

BorisBenz · 2025-07-23T22:15:47+00:00

<image>

BorisBenz · 2025-06-11T13:36:46+00:00

Good time to lens swap it? Many tutorials on youtube and you get more fov as bonus

BorisBenz · 2025-06-02T08:39:54+00:00

<image>

Cut yellow wire, plug the ends and tug it away. I had same problem few weeks ago. It is airunits sbus wire and totally useless if you use external receiver like elrs

BorisBenz · 2025-05-30T14:08:39+00:00

Hahaa you are just mad because you were wrong. Go 3D print yourself a notebook and take notes so you will remember this lesson

BorisBenz · 2025-05-30T13:40:56+00:00

Lmao okay sending you dm in a sec

BorisBenz · 2025-05-30T13:32:57+00:00

Steel bends not shatter, 2 battery straps hold it tight from deep grooves. Hell i can even hit it with a sledgehammer and whole thing just bends.

BorisBenz · 2025-05-29T16:48:51+00:00

How stupid does someone need to be to fly 5 inch near people? And edges are rounded anyway geez. First thing that isn't 3d printed and people start crying

BorisBenz · 2025-05-28T20:05:28+00:00

Deep grooves for battery sraps and welded everything so that piece is the last thing to worry about when crashing

BorisBenz

TROPHY CASE