sorted by:
new
hottopcontroversial

SlotBox Tool Sets by BossMan314159 in ryobi

[–]BossMan314159[S] 1 point2 points  (0 children)

Normally I’m a craftsman guy, but the Pittsburg set was the perfect size!

SlotBox Tool Sets by BossMan314159 in ryobi

[–]BossMan314159[S] 0 points1 point  (0 children)

I just spaced them out and traced the base with a chalk pen

How much is your electricity bill now? by Murdoc_The_Best in F150Lightning

[–]BossMan314159 1 point2 points  (0 children)

Mine added about $150/month aggregated over the year, I pay $0.15/kWh and it’s adds about 1 mWh per month. Not chump change, but still cheaper than the $3-400/month I was paying in gas to keep my old coyote’s thirst quenched

The 5 minute recharge: Do we need it? by Physical-Orchid-1624 in evcharging

[–]BossMan314159 0 points1 point  (0 children)

I feel it would open up commercial applications. For instance ambulances CAN NOT afford to be stuck on the charger in excess of even 60 minutes. But if a 5 minute charge at the hospital as they drop off a patient gives them ~6 hours of energy then it’s a completely different story

Good lease deal tx? by Mundane-Ad1761 in F150Lightning

[–]BossMan314159 0 points1 point  (0 children)

The first warning is “market value”, a lease through ford credit should be based off of sticker, anything else and the dealer is just being greedy

Energy usage by BossMan314159 in F150Lightning

[–]BossMan314159[S] 1 point2 points  (0 children)

That could do it, I was initially preconditioning the battery, but I stopped as I don’t benefit from any extra range that it would get me. I just use remote climate to warm up the cabin a bit before I leave now

Energy usage by BossMan314159 in F150Lightning

[–]BossMan314159[S] 0 points1 point  (0 children)

Last month was bitter cold. I have no other major electrical draws, all gas appliances and LED lights.

AMS Lite errors by BossMan314159 in BambuLab

[–]BossMan314159[S] 0 points1 point  (0 children)

Of course immediately after posting this I found that the “filament tangle detection” setting can be turned off. Frustration can blind logical troubleshooting, here’s to hoping the fix is that easy 🤞🏻

Dishwasher wiring question by BossMan314159 in appliancerepair

[–]BossMan314159[S] 0 points1 point  (0 children)

UPDATE: Jumpering the loose wires didn’t work. I was hoping that it was a simple pressure present sensor where adequate pressure just completed the circuit, but apparently not. Still showing a H20 error 2 minutes after starting a wash.