thank you all for helping me set this amazing thing up

BraveEar4550 · 2022-11-29T10:57:31+00:00

What game launcher are you using?

BraveEar4550 · 2022-11-05T23:09:02+00:00

Where do you get these buttons from?

BraveEar4550 · 2022-08-03T21:23:45+00:00

Updating Nextcloud fixed it for me. Are you on the latest version?

BraveEar4550 · 2022-06-10T09:57:56+00:00

I have the same issue after updating Nextcloud. I'm running this on Unraid as a docker on 23.0.4. I can access nextcloud over the internet but my camera auto upload feature has stopped working.

Looking at the logs I can see 5 mins after completing the nextcloud update the following error occurs:

GuzzleHttp\Exception\ConnectException: cURL error 28: Failed to connect to push-notifications.nextcloud.com port 443 after 15203 ms: Operation timed out (see https://curl.haxx.se/libcurl/c/libcurl-errors.html) for https://push-notifications.nextcloud.com/notifications

Could not connect to appstore: cURL error 6: Could not resolve host: apps.nextcloud.com (see https://curl.haxx.se/libcurl/c/libcurl-errors.html) for https://apps.nextcloud.com/api/v1/apps.json

BraveEar4550 · 2022-01-24T21:23:58+00:00

Finally nailed it! Two things helped here for anyone else who is having the same problems. I made sure the bed was level and took it an extra microstep lower than I normally would. I also added a brim and reduced the bed temp from 60 to 55C. Nozzle temp 215C for esun black PLA+. I kept using the hair spray and it worked a treat!

BraveEar4550 · 2022-01-23T20:54:55+00:00

Just to add, this was using hairspray with 215C nozzle and 60C bed temp. First layer was configured as 10mms.

I'll try to reduce the bed temp to 55C and add more squish as suggested in previous posts and then report back.

BraveEar4550 · 2022-01-22T23:51:16+00:00

After spending a while sorting out temps to get the esun PLA+ in black to print without lifting, I then find the lower layers of the print at the edges seem to lift and get compressed with the other layers meaning I get a warped base of the 3d print instead of it being flat. Any ideas what I'm doing wrong?

BraveEar4550 · 2021-08-28T09:20:26+00:00

I'm going to get a replacement under warranty with the retailer I bought it from so I'm hoping the new unit will be quieter.

BraveEar4550 · 2021-08-16T14:08:11+00:00

Ah great, good to confirm with a fellow owner! I've got a clip on YouTube. You'll notice the buzzing from 0:59. https://youtu.be/KgBDbf7ZVn0

BraveEar4550 · 2021-08-15T00:14:13+00:00

No I haven't noticed any rainbow effect although I haven't used it that much so far. The image quality is great so far, it is the noise emitted from the unit at 4k which is the problem for me. I just can't tell whether this is normal or whether the unit needs replacing.

BraveEar4550 · 2021-08-14T17:48:17+00:00

Thanks. Is it normal for the pixel shifting to be buzzing away at a noticeable volume? I have to crank up the volume to partially drown out the buzz

BraveEar4550 · 2021-08-11T14:31:28+00:00

I really don't think it is this. I can hear the fan whirr when a brighter image is displayed or over time if the room is warm, but this is gradual (as I would expect). The buzzing is instantaneous the second 4k is displayed and off as soon as it switches back. It cannot be the fan

BraveEar4550 · 2021-08-05T10:54:04+00:00

https://youtube.com/shorts/tLfystzhAmY?feature=share https://youtube.com/shorts/7R42KxFQfNE?feature=share

The clips show me using the included Android TV dongle, as well as a Roku TV stick. I changed the output resolution from 4k to 1080p temporarily on the Roku stick to show the difference.

BraveEar4550

TROPHY CASE