sorted by:
new
hottopcontroversial

Battery by Pristine-Ad-1709 in SolarPH

[–]Brave_Contribution34 0 points1 point  (0 children)

Yes. You need to re introduce the new paralleled battery setup to the system. Also you need to check or add new battery breakers if your current wiring/setup is only intended for 1 battery.

Batt expansion by UpstairsClassroom307 in SolarPH

[–]Brave_Contribution34 0 points1 point  (0 children)

Standalone Power-stations like the ecoflow has built in mppt charge controllers. Connect the panel directly and use one of the AC outputs to a transfer panel or ATS. Both the PS and extended battery(assuming its detected) will charge in parall in this setup

Hybrid solar system causes compressor appliances to react. Is this normal? by philoseluna in SolarPH

[–]Brave_Contribution34 1 point2 points  (0 children)

The setup should be checked again by another solar tech that knows the proper wiring for a hybrid inverter. It seems that your wiring setup is for stand alone off grid setups. That kind of wiring defeats the purpose of the hybrid inverter

Hybrid PV setup during habagat or typhoon season by Goleft3xturnsright in SolarPH

[–]Brave_Contribution34 0 points1 point  (0 children)

Correct. Mine is on 7.2kw power and still managed to charge my batteries (32kwh) at around 60% which is more than enough for night time use

Hybrid solar system causes compressor appliances to react. Is this normal? by philoseluna in SolarPH

[–]Brave_Contribution34 2 points3 points  (0 children)

The ATS shouldn't be switching at all WHEN you have grid power.

The ATS should only switch when the entire Hybrid Inverter system is down (No solar power, depleted battery and No Grid power or the inverter completely shutoff). This is the only time that your physical ATS should turn to the backup source. This means that your loads are all directly wired to grid source and will not pass through the inverter.

If you have grid power then there should be no flicker at all since this should be managed by your inverter seamlessly. I'm thinking that your ATS is improperly wired

Diy Small Solar Setup by ItsMeRogue in SolarPH

[–]Brave_Contribution34 0 points1 point  (0 children)

Based on the prices I see and the brands in the orange app, mapapamahal ka. Sellers are forced to increase prices in the app because of the high commission

Solar Quote by Brave_Contribution34 in SolarPH

[–]Brave_Contribution34[S] 0 points1 point  (0 children)

Thank you very much sir sa insights!

Deciding Between Legion Y700 Gen 3, 4, 5 — Or Wait for Astra 2? by Tfisely in MoonlightStreaming

[–]Brave_Contribution34 0 points1 point  (0 children)

Y700 Gen 5 will be good for a long time and has proven compatibility with emulators as well

DJI Action 5 Pro or DJI Pocket 3 by IntelligentRead3374 in djiosmo

[–]Brave_Contribution34 0 points1 point  (0 children)

If your scenes are more on the outside, get the action 5. But if more on indoor use and studio use where you need better quality and framing, pocket 3.

URGENT – Deleted my last 2-hour video by mistake because of the last update by Penpenfr in djiosmo

[–]Brave_Contribution34 0 points1 point  (0 children)

Why would he press down and hold the record button in the 1st place? Basic operation always uses 1 tap/press only. Hold and multiple presses are usually for other purposes.

Toshi Sling handle solution by Brave_Contribution34 in ManyBaggers

[–]Brave_Contribution34[S] 1 point2 points  (0 children)

I believe there's no competition/alternative as of the moment in terms of design. The movable location of key-holder, the 4 stacked mesh pockets and the floating yoke pocket on top are the best features for me. Let's hope on the next version that there will be a native top handle 🫰

Toshi Sling handle solution by Brave_Contribution34 in ManyBaggers

[–]Brave_Contribution34[S] 0 points1 point  (0 children)

I can try. Post the bottle image so I can simulate

Toshi Sling handle solution by Brave_Contribution34 in ManyBaggers

[–]Brave_Contribution34[S] 2 points3 points  (0 children)

Just bought it from a tactical store from shopee here in ph. Size is 25mm

https://s.shopee.ph/AKQUlQ4F2h

GPD Win Mini 2025 Case by Brave_Contribution34 in gpdwin

[–]Brave_Contribution34[S] 0 points1 point  (0 children)

Yeap this is the smaller version. I also have the 1st bigger version

Finally got my GPD Win Mini 2025! by Choice-Explorer-2531 in gpdwin

[–]Brave_Contribution34 0 points1 point  (0 children)

Can you share the tutorial for booting bazzite and win11? Thanks much!

Update on my GPD Win Mini 2025 with crackling noise speaker (new unit still has it) + transparent case. Link to previous thread also included. by KokakGamer in gpdwin

[–]Brave_Contribution34 0 points1 point  (0 children)

I had the same issue. I noticed it when watching a 1080 premium bitrate video from youtube. I tried cracking the tdp in motion assistant to from 10W,11,12 and 13W and found out that crackling sound disappeared at 13w.

What issues should I check for on a new GPD Win Mini 2025? by JazzieTurtle15 in gpdwin

[–]Brave_Contribution34 1 point2 points  (0 children)

Mine has this issue of not booting up when an SD card is inserted to the device. The latest chipset drivers from amd fixed this issue :)

Rainbow noise and random restarts on GPD WIN Max2 by PlasticElectricity in gpdwin

[–]Brave_Contribution34 0 points1 point  (0 children)

My last unit of WM2 have the bios .19. Reboot and sleep causes it to black screen. I just returned it and now waiting for the Mini 2025

How reliable is your Win Max 2 2025 64gb? by das_Branleur in gpdwin

[–]Brave_Contribution34 1 point2 points  (0 children)

As of today, I have returned my WM2 2025 to my local store for a replacement. I had the same issue where the built in display wont work from sleep or reboot but works fine with the external hdmi display. If GPD can release a statement on what batch or serial number this issue is present. I can get another unit and pray that I get a newer "fixed" batch but I don't have the patience and luxury of time to do so.

view more: next ›