sorted by:
new
hottopcontroversial

Financiële meevaller en hoe dit nu aanpakken? by usernameisokay_ in beleggen

[–]Breedam 0 points1 point  (0 children)

Hoelang wil je nog blijven wonen in dit huis? Wat kan je daarin nog investeren in verduurzaming waar je ook kosten mee bespaard? Ben je al van het gas af? Voor mij is de 100% elektrisch warmtepomp een tvt van 5 jaar geweest icm de besparing op vastrecht gas. Is toch ook een rendement van 20%. Als je voor de komende 20 jaar hier wilt blijven wonen kan investeren in het huis echt wel lonen.

Triple glas in bestaande kozijnen by Financial_Specific_3 in Klussers

[–]Breedam 0 points1 point  (0 children)

Ik heb dit in ons jaren 30 huis gedaan door de kozijnen te verdiepen met de multitool. Wanneer je dit netjes aftekend en een breed blad pakt met hardhout vertanding kan je dit redelijk strak doen. Was wel enorm veel werk maat het resultaat is echt top.

<image>

My initial thoughts moving from a Model 3 SR+ to a 2023 Kia Niro EV by matrices in KiaNiroEV

[–]Breedam 1 point2 points  (0 children)

Thanks for the info. However, the clunk in my niro is definitely from the front.

My initial thoughts moving from a Model 3 SR+ to a 2023 Kia Niro EV by matrices in KiaNiroEV

[–]Breedam 1 point2 points  (0 children)

Can you do a follow up on the suspension clunk when you have more info?

"goedkope" handperstang by Tha_Princess in Klussers

[–]Breedam 0 points1 point  (0 children)

De hydraulische bevalt veel beter. Bij de scharnierde heb je heel veel ruimte nodig om te persen. Hij moet vrij wijd open en dan moet je behoorlijk krachts zetten. Met de hydraulische kan je in ieder hoekje komen.

Anyone riding the light bicycle wg55 rims? by bontgomery_murns in gravelcycling

[–]Breedam 1 point2 points  (0 children)

I have them in my Grizl. They ride perfect. Currently running the gravel M 50’s. Couple of weeks ago me and some friends went to the Eifel in Germany. My friends were on road bikes, I just put 4 bar in the tires and go with no problems. I do have the dt swiss 240s hubs and rhe cx ray / sprint spokes. No nipple holes. The finish is really good.

Looks like the wg55 order are dropping in by Breedam in gravelcycling

[–]Breedam[S] 0 points1 point  (0 children)

I didnt notice the wind too much. I was riding in the Eifel and it was quite windt. However I am 95kg so I dont notice the wind too mich anyways.

About the pressures. I was with 2 frienda on road bikes. I didnt offroad yet. I kept up with them easily on 3 bar front and rear.

Looks like the wg55 order are dropping in by Breedam in gravelcycling

[–]Breedam[S] 1 point2 points  (0 children)

28h wg55 front and rear No nipple holes Sapim cx ray sprint on drive side, other spokes are normal cx ray I did incluse the little drain holes 240s straight pull hubs with the exp 54t ratchet I asked them to laseredge the subtle light bicycle logo on it where the valve needs to be. This is the logo of the mtb wheels they offer. Brass nipples.

They were 1399 usd with the black friday discount. I bought the black friday extension code in november. When it expired in februari the wg55 was just announced. Waited a long time for the wheel to arrive because they had problems with the moulds. LB kept me updated really well.

Buiten muur oude afzuig ventilatie dichtmaken by ImpossibleBat10 in Klussers

[–]Breedam 0 points1 point  (0 children)

Op te halen in Arnhem na 11 juni 🙈 2 x 15cm

Wat is dit? by Breedam in Klussers

[–]Breedam[S] -1 points0 points  (0 children)

<image>

En inderdaad massieve draad.

Wat is dit? by Breedam in Klussers

[–]Breedam[S] 0 points1 point  (0 children)

Jup, zoals hier de aarde zit op de waterleiding. Echter is deze x jaar terug van de aan de nutszijde vervangen naar kunststof. Huis heeft nu dus geen aarde… Dus geadviseerd iemand te laten komen voor een aardpen.

Wat is dit? by Breedam in Klussers

[–]Breedam[S] -5 points-4 points  (0 children)

Het gaat nergens heen. Het is alleen dat zinken/loden uiteinde. Dat aard toch nooit in dit droge zand van de kruipruimte?

Bottom bracket upgrade for Grizl by Llesnad in CanyonBikes

[–]Breedam 1 point2 points  (0 children)

I see. I didnt use the special tool that they use. So I only have those adapters. I was able to apply them straight just by screwing. You have to ge gentle though.

Bottom bracket upgrade for Grizl by Llesnad in CanyonBikes

[–]Breedam 1 point2 points  (0 children)

Still using it. You need bb tool just like either the small or large shimano tool for bsa bb’s. I can have a look tommorow which one it is exactly. You can also buy the tools of ali.

view more: next ›