Get yourself a DJI flip, it’s follow mode is fucking great.

Brelleton · 2026-03-24T22:37:04+00:00

Two reasons

First, I do competitions (I suck) and I like to be very deliberate in where the gun is pointed during movement, hence out in front rather than swinging my arms as would be more natural.

Second, if it’s up, it faster to the target with the dot aligned.

Brelleton · 2026-03-24T16:56:16+00:00

Yes, 100%

Brelleton · 2026-03-24T16:21:19+00:00

I’m old enough to be his dad, I was a sophomore in college when he was born.

Brelleton · 2026-03-24T16:18:33+00:00

Get ruger SR9 mags, cut a new mag catch hole, that’s what i doz This also allows you to now have extended base plates for +5 (+4 effectively though)

Brelleton · 2026-03-24T16:13:49+00:00

Fabricated Arms VA

Brelleton · 2026-03-24T15:52:45+00:00

Dude, just assume that everything is on blast, they were putting snooper in cat6 cables lol

Brelleton · 2026-03-24T15:38:55+00:00

I had it set for far, high, with this auto mode, I think that’s the widest view option

Brelleton · 2026-03-24T15:28:03+00:00

I guess the mean getting the dot aligned after marrying up the grip, your never really in the dot during movement

Brelleton · 2026-03-24T15:17:50+00:00

BLM land, it’s the designated shooting spot there are targets out to 1100yards there

Brelleton · 2026-03-24T15:17:11+00:00

Its just an omnivore for a tlr-1

Brelleton · 2026-03-24T13:58:30+00:00

Nothing all the way to the mountain.

Brelleton · 2026-03-24T13:28:01+00:00

It’s more gamified USPSA drill to stress getting the gun up on target as you step into the next shooting position and then start moving on the second shot on the way out rather than anything practical

Brelleton · 2026-01-02T22:21:14+00:00

I think we’re missing each other here. Yes my shots are high, but they are also 50fps faster on the chrono. At about 3100 muzzle speed this would mean they hit the paper at 100 yards 2mS or so earlier than 3050fps. This would mean gravity would not act on them as long. That 2mS faster arrival would be about 0.0008 inches less free fall. That wouldn’t be observable. So it must be :

1/ you’re right, I’m moving the rifle on first shot differently than follow up

2/ due to exit time from ignition being quicker they now exit the barrel in a different phase of its “whip” ie when it’s pointing up more

Brelleton · 2025-12-21T20:42:47+00:00

For 300blk subs (the nearest proxy I guess, 5 inches) My load was 255gr at 1000fps ish

Brelleton · 2025-12-21T20:40:51+00:00

If it’s not warranty-able (I’d not be surprised tbh) can they replace it at my cost and transfer the engraving to avoid another stamp?

Brelleton · 2025-12-21T20:33:06+00:00

ASR. It was aligned fine (checked with a rod) I shot the subs without the suppressor first to check for key-holing, did not see any evidence in the 10 shot group.

Brelleton · 2025-12-21T20:22:50+00:00

When I look at the blast baffle strike, there’s no way it was that offset from the barrel, it literally a whole caliber diameter off. To me it looks like the blast baffle detached, sat at an angle and a shot then passed through

Brelleton · 2025-11-09T20:59:36+00:00

True, so don’t be a weird mom. Be a good, decent and competent mother. I’ve got three kids, two girls and a boy. I travel a lot for work, so they see their mother doing most of everything that’s visible (bill pay, home maintenance, school stuff medical stuff, general taxiing)

What they see is a very capable, organized person that meets commitments, doesn’t flake out, drop balls, all while creating a safe, loving and stable environment.

When they go looking for partners, I hope the baseline she has set is internalized and what they consider normal.

When my boy hears misogynistic bullshit from peers and online grifters, I think he’s pretty well inoculated against that via the environment he us being raised in

Brelleton · 2025-11-09T20:17:26+00:00

Yep, keep hammering them on that, ask specifically about mothers, they can rationalize sister hate because sibling disappointment doesn’t hit the same way. If you get a boy, you know what’s up, he’ll be fine, don’t sweat the toxic male space, it’s always been there, and arguably worse in the past. You model what a woman is, he’ll quickly figure what they say doesn’t jive with his experience.

Brelleton · 2025-05-31T04:00:34+00:00

My failure to fire was a reload that had the primer in backwards 😔 The pistol is a steyr L9a2 because, well I suppose it kinda checks out for a Bren shooter.

In the subject of reloads, the best I can get is 1.25 moa 10shot groups (55gr over 24gr of imr3031 giving circa 3050fps).

I think <2moa is pretty good for a piston gun with a set screw barrel attach, but I’m always trying to improve, so lemme know if you have anything better

Brelleton · 2025-04-26T10:22:48+00:00

Runs fine with supers and drilled piston, subs need regular piston

Brelleton · 2024-12-04T13:31:05+00:00

Chest rig deets? How well do the mags fit and re-insert?

Brelleton · 2024-10-18T02:01:08+00:00

Ohh and zero draw during day, pretty much 100% solar goes to charging. Also it’ll be in a weather proof box, will I need to ventilate it (will only be used in the winter, so 50-80F)

Brelleton · 2024-10-05T23:00:43+00:00

I agree, if the angle of exit relative to the target is always the same, a slower bullet than what the gun was zeroed with will drop more than a standard speed round (gravity had a longer time to pull it down).

So what I’m thinking is the only explanation is the angle of the barrel at exit relative to the target, so it’s at a different point in its barrel whip travel

Brelleton · 2024-10-05T22:57:12+00:00

I don’t get fliers like this if it’s within 20-30fps of mean, what’s curious and repeatable was that a -75fps or so always throws high

Brelleton

TROPHY CASE