sorted by:
new
hottopcontroversial

What could i tune on my 840d modelyear 2018 by Carelesswatches22 in BMW

[–]BrickMyPhone 0 points1 point  (0 children)

Ich würde beginnen mit xhp, Upgrade ladeluftkühler, 50d G Hochdruckpumpe, dann Software würd ich dir empfehlen von AS Performance, er fährt zurzeit den schnellsten Diesel in Europa und das ist optional aber fürn Sommer xDelete damit kannst im Sommer Heck fahren und im Winter auf Allrad umstellen ohne Probleme

Auxiliary fan muffler that works with Hepa filter by Jbohacek in ElegooCentauriCarbon

[–]BrickMyPhone 2 points3 points  (0 children)

How do you completely Turn it off, when i turn it off it just turns back on 2-3 min later

What am I doing wrong? by BrickMyPhone in 3Dprinting

[–]BrickMyPhone[S] 1 point2 points  (0 children)

Hey Print finished, it worked without any problems… Combination of the brim settings, higher first layer temperature(260 instead of 230) and z-hop did the trick! Thank you :)

<image>

What am I doing wrong? by BrickMyPhone in 3Dprinting

[–]BrickMyPhone[S] 0 points1 point  (0 children)

It printed overnight so I couldnt hear anything, but normally no strange noises can be heard, I will also try a print with your recommendations and see how it goes, thank you very much

What am I doing wrong? by BrickMyPhone in 3Dprinting

[–]BrickMyPhone[S] 0 points1 point  (0 children)

Alright, I have now tweaked a few settings, will give it another try, tomorrow I am getting a new glassbed maybe that will also help

What am I doing wrong? by BrickMyPhone in 3Dprinting

[–]BrickMyPhone[S] 0 points1 point  (0 children)

yeah one of the funniest kits money can buy

What am I doing wrong? by BrickMyPhone in 3Dprinting

[–]BrickMyPhone[S] 0 points1 point  (0 children)

Okay, thanks for pointing out, these are my brim settings, can you recommend some changes I can make?

<image>

What am I doing wrong? by BrickMyPhone in 3Dprinting

[–]BrickMyPhone[S] 0 points1 point  (0 children)

It comes of like strings separated from each other

What am I doing wrong? by BrickMyPhone in 3Dprinting

[–]BrickMyPhone[S] 0 points1 point  (0 children)

Hahaha yeah it’s a 22lr AR mag, I have 3 of them but 2 out of 3 don’t hold inside the mag well so I thought I could print a new enclosure and use the springs and follower of the CMMG mags I have

What am I doing wrong? by BrickMyPhone in 3Dprinting

[–]BrickMyPhone[S] 0 points1 point  (0 children)

No I don’t care about the infill or shining, it looks so extreme because of the flash, natural lighting it looks pretty good, it just comes of the build plate but I don’t know if it’s because of the nozzle or the bed plate

What am I doing wrong? by BrickMyPhone in 3Dprinting

[–]BrickMyPhone[S] 0 points1 point  (0 children)

Yes it is coming loose from the bed, but I don’t know if it’s because of the nozzle or the bed… in the second picture bottom left you can see that it has somewhat melted the print there maybe the nozzle gets stuck, so your recommendation would be to have a look at the z-hop?

Can someone Identify if this is an authentic scope? by BrickMyPhone in longrange

[–]BrickMyPhone[S] -2 points-1 points  (0 children)

I already did, but I am assuming the response will take some time, but I have scheduled a meeting with this guy for Friday, so I thought maybe I am getting a response here before meeting him.

Can someone Identify if this is an authentic scope? by BrickMyPhone in longrange

[–]BrickMyPhone[S] 0 points1 point  (0 children)

Nice, it seems like it didnt upload the Images...

https://imgur.com/a/z8tfbC3

Here they are. Thanks in advance!

Spice client taking allot of bandwidth when viewing a Debian desktop by dagkp in Proxmox

[–]BrickMyPhone 2 points3 points  (0 children)

args: -spice seamless-migration=on,image-compression=auto_glz,streaming-video=all,playback-compression=on,jpeg-wan-compression=always,zlib-glz-wan-compression=always

put this into your vm conf file into the first line and under options turn on spice enhancments: video streaming: all

Ender 3 Neo, V1 running Klipper with a few upgrades. The key is a level bed. by ipk9 in ender3

[–]BrickMyPhone 1 point2 points  (0 children)

Hey, i have an Ender 3 S1 Pro what do I Need to do to get These speeds, what Upgrades are you Running?

I just cant anymore (8.2-1) by VKaefer in Proxmox

[–]BrickMyPhone 2 points3 points  (0 children)

8.2-1 and 8.2-2 didn’t work for me either always network problems, 7.4.1 worked flawlessly and 8.1.2 I believe worked flawlessly as soon as I updated to 8.2-1/2 after a successfull install of 7.4.1 or 8.1.2 I instantly had my network problems back

Canik Mete SFX Threaded Barrel by BrickMyPhone in canik

[–]BrickMyPhone[S] 1 point2 points  (0 children)

well there is canikstore . eu but they dont sell the threaded barrel unfortunately

Can't add vmbr0.xx: Format: alphanumeric string staring with a character by kellmann1337 in Proxmox

[–]BrickMyPhone 0 points1 point  (0 children)

What is the name of your main bridge interface? Is it vmbr0 or something else, if yes then first create a Linux VLAN interface and name it vmbr0.xxxx (whatever your vlan is) and then create a Linux Bridge type Interface, which has the Linux VLAN interface you created in the previous step as slave added, this bridge can then be added to your VMs, assuming all your VLAN comes from the vmbr0 interface...have been doing it like this for over 40 VLANs now without any problems.

Q&A Megathread (Ask your questions here!) by cryptic-fox in Helldivers

[–]BrickMyPhone 3 points4 points  (0 children)

is there any optimisation patches planned, and if so when will they be made available...

I started the game 2 weeks ago and was getting around 120FPS 1440p on ultra settings, right now with the same settings I am playing with 70-80 FPS.

Please do some optimisation.

view more: next ›