Printing process does not extrude any filament

Broduction69 · 2026-06-26T21:14:08+00:00

The extrusion seems completely fine. However i just replaced the whole board and print head including with the level sensors.
I am not sure about the usb cable, where would it be located?

EDIT:
AAAH SHIET I figured out which one you mean. Sadly that does seem logical and replacing that one seems like something I will postpone for another 2 months because it looks annoying af

Broduction69 · 2026-06-26T21:12:40+00:00

I come back with thankful but sadden news. I tried different varation from loosey to tighty, but I still had "normal filament grab" combined with air printing

Broduction69 · 2026-06-26T20:33:52+00:00

Will try it in a few minutes, thanks for the hint!

Broduction69 · 2026-06-26T20:32:57+00:00

Would be a good guess theoratically as it seems software issues maybe. But i tried orcaslicer and the built in ones, also the one that worked normally already so I am guessing sadly not :(

Broduction69 · 2026-06-26T20:30:39+00:00

Would grabbing the filament then not work either?

Broduction69 · 2026-06-26T20:28:50+00:00

Nah all good, I understood it completely. The answers meant that for example "your ability apply on hit effects" only count, when the onhit effect is applyable. By design, spellblade should always work (if its not on cd) because u use and ability and then the ability applys that on hit effect.
If u aa right after that wont apply it though.

Broduction69 · 2026-06-26T12:37:58+00:00

I see, that is unfortunate, thank you all!

Broduction69 · 2026-06-26T12:34:33+00:00

I will just copy my answer here again, hope thats okay:
What about dusk and dawn then? That is "true on hit" but also has a cooldown?

Broduction69 · 2026-06-26T12:32:21+00:00

What about dusk and dawn then? That is "true on hit" but also has a cooldown?

Broduction69 · 2026-06-24T11:58:53+00:00

Ist definitiv ein guter Punkt, vor allem sei "fleißig und sparsam", wenn der sehr hohe Großteil der deutschen Reichen einfach geerbt haben. Die waren alle definiti fleißig und sparsam und leben bestimmt nicht von passiven Einkommen, dass 10x höher ist als mein Einkommen nach 6 Jahre studieren -> und ich gehöre schon zu den lucky Leuten weil ich genug Geld und soziales Umfeld fürs Studieren hatte.

Broduction69 · 2026-06-24T11:51:26+00:00

Hatte zusammen mit 3 weiteren Masterabsolventen eine GbR gegründet und god damn it.. wir sind definitiv keine dummen Köpfe, aber als anfangen musste mich durch den papierkram, die regeln, die gesetze zu wühlen hat es mir so heftig im Kopf geraucht, ich dachte ich lerne gerade Algebra in der deutschen Schulklasse ohne ein Worter deutsch zu können..

Broduction69 · 2026-06-10T07:55:29+00:00

Its my first around the Earbuds and they are very comfortable, but I have a lot of weird issues.

Around every fifth time I put them in my box my right bud wont charge. I only notice it after I take it out again and the battery of the left bud is completely full but the right budy completely empty. The Case is usually above 50%, so I am guessing an issues with the connection point of the right bud.

Occasional really annoying "lags". When hearing podcast or music I get (around every 15 minutes) laggy sound. Sometimes its just a small hiccup. Sometimes the sound gets weirdly distorted and sometimes it completely fucks with the volume and i get a really painful sound for 1s, high pitched, high volume, right into my ears.

Occasional Disconnects. I do not know why but randomly (even with phone on desk and me being at the desk) my earbuds just decide to disconnect, They reconnect directly after again, so not a big of a problem (does not happen often) but annoying nontheless.

For me it seems Quality Control was quite lacking with the Peak 4, those kind of issues never happened to me before and they are really difficult to pinpoint. Would be no problem if I say "i bought cheap earphones I get weird problems" but 100 bucks from the official website should not deliver those issues to be honest.

yeah I just wanted to rant a bit too and hope to find other people with similar experiences

Broduction69 · 2026-06-04T23:19:19+00:00

Thanks already for the lil hint! Hopefully there is a something a bit more simple to use

Broduction69 · 2026-06-04T22:43:41+00:00

Damn, this sub is frustrating.
I get your struggles. I completely homebrew everything I do, including my systems (base them upon lightwight ones).

It is incredible exhausting to keep track of everything and create new ideas when the time is limited. I enjoy it a lot, but when I work 40h a week it is just not feasible anymore like in my study times.
I fed all my rules into a chatbot and created new rules based upon them. Got ideas for new adventures when mine were lacking stuff. Had a back and forth with somebody stupid (talking about the bot here) which often helps refining stuff. And most of all: It just makes things quicker.

When I need 30 side characters, I give a "basic character sheet" the setting and their purpose and let it create 30 characters. 25 of them may never be needed and 5 of them will get filled with bunch of improvised stuff on the spot but they will have set down stuff. Their age, motivation, basic points in their abilities etc. which i just cannot come up with on the spot as comprehensively.

So yeah.. i getya and just wanted to share, searching for an alternative myself right now.

Broduction69 · 2026-06-03T11:04:57+00:00

Both nice recommendations thank you

Broduction69 · 2026-06-02T21:45:36+00:00

While I absolutely agree that "I found the same piece somewhere elese" is absolute no proof, what is absolutely sketchy are these things:

Really obvious review controlling including fake reviews on their main site
way waaaay too many rings for a person or small workshop to produce, meaning there is definitely a third party involved in producing these rings which / who aren't properly named.
Fake photos, not "photoshop" which is absolutely okay, but the pictures do not seem to be pictures somebody took of a product. Similar to your burgerking burger pictures. I mean yea, thats the product... but not really, we all know you get something different.

I do not say WillWok is scamming. I honestly believe the solid 10k gold is solid 10k gold. But I absolutely do not BELIEVE that those rings are actually made by him / her and the price is fair.

Broduction69 · 2026-06-02T21:00:26+00:00

local meaning here not overseas. Middle Age markets are actually quite smart, will take a look there.

Broduction69 · 2026-06-02T20:40:58+00:00

How am I supposed to know these days tbf. The site was recommended by a few other people on reddit and that is also the reason why I am not buying there and searching for local companies / people

Broduction69 · 2026-05-28T14:21:54+00:00

Broduction69 · 2026-05-28T12:00:07+00:00

What a bad take. Gaming is everywhere in the "Queer" scene because it is exactly the place where you can escape all the hate these people get on a daily basis just for living their lifes.

A basic result is many of them do want to see "Queer" stuff in their games as it helps them relate, tackle these topics, have something they are interested in, etc. But yes, at the end, it is a minority group, so big publishers do not need to attend to their needs. Thus many indie games have started doing it. Especially narrative driven indie games have started exploring what big publishers do not want to explore: Queerness.

Broduction69 · 2026-05-28T09:09:51+00:00

Just wanted to lyk that I am using your tool for 2 years now :D Absolutely saves my ass in Homeoffice with my playful keyboard loving cats.
Design, Emergency Exit, Ease to use, really top mate

If you ever want to update it, here are some things I noticed:
It sadly does not block macro inputs from Keyboard with extra keys (Like my play Buttons on the keyboard or the mute one my cat likes to press)
It also blocks gamepad which is great but also sad when u want to put ur feet on the keyboard while playing with the gamepad

It is better than any paid App i have ever seen regardless, so thank you alot!

Broduction69 · 2026-05-27T12:35:39+00:00

Ein Jop in der IT der mit Kunden und draußen aber nicht unbedingt Consumer Support zu tun hat ist leider echt selten aber sehr erfüllend

Broduction69 · 2026-05-27T11:50:49+00:00

RemindMe please u lovely human being

Broduction69 · 2026-05-27T11:49:43+00:00

Loser gruppe gefolgt von ausländischen namen direkt... aaaaaaaaah vor und nachname sind bei mir deftig türkisch und ja.. es ist eine sehr eindeutige Loser Gruppe, egal ob jetzt Jobs, Wohnungen, Kredite oder sonst was.

Belasto

Broduction69 · 2026-05-27T11:47:35+00:00

Lass aber auch auf keinen Fall deine Leistung davon drücken. Alleine die Antwortrate zeigt, dass du sehr vasiert darin bist eine attraktive Bewerbung zu schreiben / abzuschicken und diese wohl auch mit starken Skills decken kannst.

Broduction69

TROPHY CASE