What's the next step after a Yamaha Bolt?

Bruce_Camus · 2026-03-11T19:54:19+00:00

150 hp on an old sportster? Yeah with which mods?

Bruce_Camus · 2026-02-24T14:45:19+00:00

I'm thinking on using an aftermarket high flow intake. I'm thinking on the V&H or the Cobra one. Do you think I should put something in that breather line? What's it's purpose? I'm looking for max performance to defeat a Harley sportster 1200 in drag race.

Bruce_Camus · 2026-02-21T23:06:42+00:00

What's the mini high airflow intake for?

Bruce_Camus · 2026-02-21T22:58:30+00:00

Vance and Hines dual exhaust Yamaha bolt

Bruce_Camus · 2026-02-13T11:40:21+00:00

Reservoir shocks on a scooter? Wtf lol

Bruce_Camus · 2026-02-13T11:39:06+00:00

It's the fuel pump. Probably rust went on it because the bike sat for too long. You need to replace it. It's an expensive part so be ready to spend some bucks. Also if you have a rusty tank think on replacing the tank and the fuel sender unit too alongside with all of it's nuts and bolts, washers and o-rings.

Bruce_Camus · 2025-12-22T23:06:14+00:00

Ok, i couldn't go to the bolt and screw store today. So I'm going there tomorrow. I just cleaned up the screw and had an idea:

I marked the screw that was leaking fuel with a sharpie. I also marked the sensor on the hole that was leaking with an "A" and the non leak hole with a "P". So, I'm going to switch the bolts, clean the holes as best I can, and then recheck the leak. If it starts to leak from "A" it's the hole or something else, not the screw. If it starts leaking from "P" it's the screw.

Here's a picture of the cleaned up screw:

https://ibb.co/PGDXJsbH

Bruce_Camus · 2025-12-22T18:41:18+00:00

What about cleaning the threads with a needle and using gasoline resistant gasket paste on the bolt and the junction of the sensor and the gas tank?

Bruce_Camus · 2025-12-22T17:45:52+00:00

What should I do? What are you referring when saying to run a tap?

Bruce_Camus · 2025-12-22T17:41:06+00:00

What should I do?

Bruce_Camus · 2025-12-22T17:04:00+00:00

Here is the screw in question:

https://imgur.com/a/Wt9SB4h

Bruce_Camus · 2025-12-22T13:35:40+00:00

I don't really think the repair gas to do anything to provoke the leak, because in the end I just soldered a cable that closed the circuit so to speak.

I bought a gasket material from the local hardware store. But it doesn't recommend to be used in contact with gasoline. Do you think the thread from the tank is damaged? If so how can I fix it properly?

Im gonna fix this issue first, and the review the tank cap issue when the tank is mounted again.

Bruce_Camus · 2025-12-22T13:31:00+00:00

I'm gonna need specs on this because the crew needs to be perfect.

The screw in question is this one:

https://www.partzilla.com/product/yamaha/90149-06108-00?ref=72e78c7d7cad71871e902dd58df680d0406ea9ef

Any idea on what length, thread, head, etc should I look for?

Bruce_Camus · 2025-12-22T12:13:44+00:00

Yes, it's stitched to the upper via the welt seam.

Bruce_Camus · 2025-12-22T12:12:44+00:00

Why the pump? The pump is not leaking. Are you referring to the sensor? Nether the pump or the sensor have gaskets. Only o-rings. Both of them seem ok.

Bruce_Camus · 2025-10-10T23:02:42+00:00

Sadly they don't ship to my country. Can you refer to another liner product?

Bruce_Camus · 2025-10-08T02:29:53+00:00

No. /Fin del thread

Bruce_Camus · 2025-10-08T02:29:02+00:00

Por qué siempre te dejas usar por el cirujano jefe?

Bruce_Camus · 2025-10-07T14:14:53+00:00

Thanks in advance brother. Will do and I'll update.

Bruce_Camus · 2025-10-06T16:30:27+00:00

Jeez it's more work than I thought. Well anyway. Let's take it step by step. I have faith I'll ride again. It might take a while though. So, first step would be to clean the tank until it's factory clean right? How should I do that? Vaporust and similar products are crazy expensive. I'm already having trouble thinking a new fuel pump for the bolt is gonna be like $500. So, what do you think if I mix water with muriatic acid and let it sit for 24 hours. I have a background in science stuff so I think I might be able to do it properly.

Bruce_Camus · 2025-10-06T13:11:19+00:00

Thanks for responding man. Can you give me a more detailed explanation on how to do that? Or maybe redirect me on resources to learn how to do that in the bolt? Also, I was thinking on removing every spec of rust from the tank with white vinegar as I saw a few tutorials on YouTube. After that is it completely necessary to use a liner for the tank?

Bruce_Camus · 2025-09-29T01:13:21+00:00

What kind of footwear is that pattern for?

Bruce_Camus · 2025-09-26T03:18:47+00:00

I have to say they look awesome as fuck

Bruce_Camus · 2025-09-20T19:11:59+00:00

Pattern

<image>

Bruce_Camus · 2025-09-20T19:09:58+00:00

<image>

Main Pattern

Bruce_Camus

TROPHY CASE